Plastic Smoke Density Tester F313，automotive interior smoke tester

The F313 Plastic Smoke Density Tester is a precision instrument designed to measure the specific optical density of smoke generated during the combustion of plastics. Developed according to GB/T 8323.2-2008. ISO 5659.2-2006. and ASTM E662-2014. it provides accurate data on smoke generation characteristics of materials. The device is widely used in plastics, construction, automotive, and aerospace industries to evaluate fire safety performance and ensure compliance with fire protection requirements.

Application

You can use the F313 Plastic Smoke Density Tester in the following areas:

Plastics industry: Evaluate smoke generation of various plastic materials, especially for fire safety assessment and material selection.

Construction industry: Test smoke density of building materials, including coatings and plastics used indoors.

Automotive industry: Assess smoke generation of interior materials to meet fire safety standards.

Aerospace industry: Conduct fire safety evaluations of aircraft materials and components.

Research institutions: Simulate fire scenarios for fire prevention and firefighting research.

Fire safety product development: Support testing and certification of fire-resistant materials.

Public safety applications: Evaluate safety materials used in airports, train stations, shopping malls, and other public spaces.

Standards

The instrument conforms to the following national and international standards:

(1) GB/T 8323.2-2008 – Plastics – Smoke generation – Part 2: Determination of smoke density using the single-chamber method

(2) ISO 5659.2-2006 – Plastics – Smoke generation – Part 2: Determination of optical density

(3) ASTM E662-2014 – Standard test method for specific optical density of smoke generated by solid materials

(4) BS 6853:1999 – Railway applications – Smoke generation from passenger carriage materials

(5) NFPA 262 – Standard test method for flame and smoke spread

(6) UL 94 – Standard for flammability of plastic materials

(7) ISO 1210 – Determination of thermal stability and flammability of plastics

Parameters

Parameter	Specification
Measurement range	0.0001–100% smoke density; 0–924 (six automatic ranges)
Operating voltage	200–240 V, 50 Hz
Environmental conditions	Room temperature – 40°C, relative humidity ≤85%
Heat flux	50 kW/m²
Light source	6.5 V incandescent lamp, wavelength 400–750 nm
Detector	Silicon photodiode, 0–100% transmittance, 0.001% precision
Fuel type	Propane ≥95% purity
Burner	Igniter and nozzle combination, 10 mm from sample
Smoke measurement system	Digital display of optical density
Chamber design	Fully open doors for easy loading, cleaning, and side-mounted controller
Gas sampling port	Optional, for toxicity testing
Chamber coating	Chemically resistant and easy to clean

Features

(1) High-precision smoke measurement: Advanced photodetector and silicon cell ensure accurate optical density readings.

(2) Automated testing: Minimizes manual intervention, improving efficiency and data reliability.

(3) Standards compatibility: Supports GB, ISO, ASTM, and other international standards.

(4) Versatile applications: Suitable for plastics, construction, automotive, aerospace, and safety testing.

(5) Safety design: Equipped with automatic shut-off to ensure operational safety.

(6) Modular configuration: Optional gas measurement ports and printer for expanded functionality.

(7) Durable and stable: High-quality materials and corrosion-resistant coating ensure long-term reliability.

Accessories

(1) Propane cylinder (≥95% purity, user-supplied)

(2) Smoke sampling tube (1 set)

(3) Silicon photodiode (1)

(4) Light source lamp, 6.5 V (1)

(5) Filter set (1)

(6) Protective door (1)

Test Principles

The F313 Plastic Smoke Density Tester measures smoke optical density by placing a burning plastic sample in a controlled environment. A light source passes through the smoke, and a silicon photodiode detects the transmitted light. The system calculates the specific optical density of the smoke. Maximum optical density is measured to evaluate the smoke-generating characteristics of the plastic material. All measurements strictly comply with GB, ISO, and ASTM standards.

Operation Instructions

Sample preparation: Ensure test samples meet dimensional requirements (100 × 100 mm, thickness ≤50 mm).

Device setup: Connect power and set appropriate parameters, including temperature and gas flow.

Start test: Press the “Start Test” button; the system automatically ignites the sample and collects data.

Safety precautions: Operators should wear protective equipment and ensure adequate ventilation.

Test completion: Data is automatically displayed and can be printed. Clean the chamber to remove residual smoke before turning off the device.

Другие товары поставщика

	Engine Blow-By Gas Measurement Test Rig	Whats/App: +86 156 1874 6768 Web: standard-groups.com Applications determination of oil content in blow-by on the engine test stand evaluation ...
	Small Parts Tester	Test Procedure: Usage Methods and Interpretations Applicable standards: ASTM F963 EN 71-1 16 CFR Part 1501 ISO 8124-1 Product Advantages: Eff...
	Multi-Function Thermal Conductivity Measurement Platform	Multi-Function Thermal Conductivity Measurement Platform is an absolute-method measurement system designed for accurate determination of thermal co...
	Carbon Rod for Aging Tester	Standard Compliant with ISO 9001. ASTM D3045. and IEC 60216 standards for material aging tests. Product Advantages Ultra-High Temperature Resist...
	Face Mask Tensile Tester	The Face Mask Tensile Tester is designed to measure tensile strength, elongation at break, and related mechanical properties of various textiles an...

Все товары поставщика

Похожие товары

	Damp Freeze and Thermal Cycling Tester	Продавец: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com Application The Damp Freeze and Thermal ...
	Alternative to BBA steady state solar simulator tester	Продавец: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com Application The BBA Steady-State Solar S...
	Alternative to PV Hail Impact Tester	Продавец: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com Application The Hail Impact Test Machine...
	Solar Panel Insulation Resistance Test Chamber	Продавец: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com Application The tester is applicable in ...
	90-Degree Peel Tester for PV Backsheets	Продавец: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com Application The tester is suitable for e...