Back & Butt Forms Testing Apparatus for Seat and Cushion Evaluation
Whats/App: +86 156 1874 6768
Web: standard-groups.com
5th Percentile Female SAE Butt Form
The 5th Percentile Female SAE Butt Form is meticulously derived from the NHTSA Hybrid III Fifth Percentile Female Anthropomorphic Test Device (ATD), ensuring a high degree of accuracy for testing applications. Constructed from cast aluminum, this form strikes an optimal balance between lightweight design and robust durability, making it suitable for a variety of testing environments.
Ready for immediate use, the Butt Form features four M10x1.5 mounting holes, complemented by a precisely CNC machined mounting surface. This attention to detail facilitates seamless integration with various testing apparatuses. The form is available as a standalone unit, with options for custom mounting brackets and holes, catering to specific needs related to Fatigue, Indentation Force Deflection (IFD)/Universal Testing Machine (UTM), Ingress/Egress, or Jounce Testers.
For those requiring tailored solutions, custom mounting brackets can be requested, ensuring that the form meets the unique specifications of your testing setup. This adaptability underscores the form’s versatility, making it an invaluable asset for researchers and engineers alike.
JSAE Adjustable Ballast Dummy
JSAE Adjustable Ballast Dummy is constructed of one SAE JSAE Back Form and one JSAE Butt Form, with a pivot joint at the H-point.
The adjustable angle is controlled with a turnbuckle. The H-point pin and turnbuckle pin are removable. The bottom fixture and torso centerline have multiple shaft locations for additional weights to be added.
Adjustable Ballast Dummy Features:
Mechanical components are constructed of non-corrosive Aluminum and Solid Stainless Steel
Pivoting fixture utilizes turnbuckle to adjust angle
Base weight of fixture is approximately 65 lbs.
Five weight shafts allow for adding various weight configurations
Locking clamp collars on weight shafts hold weights in place during testing
Available in bright polished finish
Optional perimeter retaining clamps for canvas form covers.
SAE J826 Butt Form with Rolled Hips
The SAE J826 Butt Form with Rolled Hips is in compliance with the American FMVSS, SAE J826 standard, and made of cast aluminum.
They are available with or without mounting brackets at an additional cost. These forms can be used in conjunction with other physical test systems such as Jounce, Ingress/Egress, IFD/ILD, and Fatigue Testers.
SAE J826 Compliant Back Form
SAE J826 Compliant Back Form conform to American standards for dimension, and are cast aluminum so that they are light weight. Brackets for mounting these forms are available either fixed or movable joints. The mounting holes and designed to match all of our seat testing equipment including 202a, FMVSS testers, fatigue, sequencer, Ingress/Egress, IFD, or Jounce Testers.
SAE J826 Compliant Butt Form
SAE J826 Compliant Butt Form conform to American standards for dimension, and are cast aluminum so that they are light weight. Brackets for mounting these forms are available either fixed or movable joints. The mounting holes and designed to match all of our seat testing equipment including 202a, FMVSS testers, fatigue, sequencer, Ingress/Egress, IFD, or Jounce Testers.
Also incorporated in these forms is the H-Point location, which is identified in the casting for positive location in your test set-up. This configuration does NOT have the rolled hips, which may be required for some special tests. Please see our SAE J826 Butt Form with Rolled Hips.
在线联系供应商
Other supplier products
 |
In-situ expansion analysis system | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standard ASTM E83: Standard Test Method for Verification of Linear Displacement Measurin... |
 |
Fabric Touch Cool Feeling Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Applications Fabric Cooling Sensation Tester is used to evaluate the instant cooling sensa... |
 |
Building material flame retardancy test furnace，building code compliance equipment | Whats/App: +86 156 1874 6768 Web: standard-groups.com Technical parameters: Gas used: methane flow rate (35 ± 0.5)L/min, its purity is gr... |
 |
Face Mask Tensile Tester丨Face Mask Tensile Test machine | Whats/App: +86 156 1874 6768 Web: standard-groups.com Introduction: The test machine uses the integrated structure of the motor and the speed co... |
 |
High precision environmental simulation chamber | Whats/App: +86 156 1874 6768 Web: standard-groups.com Application HVAC and Indoor Airflow Research: Study indoor airflow patterns, temperature d... |
Same products
 |
HDPE高速水冷双壁波纹管生产线 | 卖方: Shandong HUASU Plastic Technology Co.,Ltd. | 机头模具采用双流道结构、氮化磨光处理机头，偏壁调整方便快捷，保证内外层壁厚均匀和稳定成型。 最新设计密闭压力水冷冷却结构，冷却充分，多点分布真空系统，效率更高，生产速度更快。 双层在线扩口功... |
 |
PanEVAP & MVR system | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat... |
 |
PanGAP wide gap welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel... |
 |
PanBloc welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac... |
 |
PanBox welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBox welded plate heat exchangerconsists of a laser welded plate pack with optimized corrugated... |
