Laboratory Flame Spread Tester for Insulation Panels

Whats/App: +86 156 1874 6768

Web: standard-groups.com

Standards

This tester conforms to the following national and international standards:

GB/T 27904‑2011 — Test method for flame spread of interior decoration materials

GB/T 25207‑2010 — Classification of combustion performance of building decorative materials

GB 8624‑2012 — Classification of burning behavior of building materials and products

GB/T 16172‑2007 — Determination of heat release rate and total heat release of building materials and products (Cone Calorimeter Method)

BSS 7365 — UK aerospace standard for combustion and smoke density of aerospace composite and interior materials

AITM 2.0053 — European aerospace industry method for heat release rate and smoke evaluation

FAR Part 25 Appendix F Part VI — FAA regulatory requirement for flame propagation, smoke density, and toxicity in civil aircraft cabin materials

Parameters

Parameter	Specification
Dimensions	1220 × 570 × 520 mm; 1200 × 1150 × 1350 mm; 800 × 800 × 400 mm
Weight	185 kg
Thermal Radiation Source	400 VAC, 3-phase electric heating plate, PID control, ±0.1°C accuracy
Radiation Strip Width	76 mm, six strips, operational up to 704°C
Sample Angle	30° relative to horizontal plane
Ignition System	Axially symmetric propane burner, 0.15 mm nozzle
Burner Height	Flame at least 51 mm above sample plane
Flame Spread Measurement	Laser pointer for accurate monitoring
Thermocouple Placement	Back wall 279 mm, right wall 292 mm, below radiation plate 51 mm, ±2°C accuracy
Heat Flux Range	≥60 kW/m², with self-circulating cooling water
Heat Flux Mounting	Steel plate 3.2 mm thick, with 3 × 25.4 mm insertion holes
Sample Holders	Standard and short versions (for hook-and-loop tests)
Data Acquisition	Computer and printer, automatic test timing ±0.1 s

Features

Enclosed test chamber: Includes integrated chimney and controlled radiation environment.

Precision thermal radiation source: PID-controlled electric heating plate ensures uniform, stable heat flux.

Automated sample handling: Pneumatic sliding drawer allows easy sample insertion and removal.

Accurate ignition and flame monitoring: Propane burner with laser pointer ensures precise flame spread measurement.

Thermocouple monitoring: Accurately records sample and chamber temperatures at multiple points.

High-performance heat flux system: Measures critical heat flux for ignition and flame propagation.

Data acquisition and automation: Test time, flame spread, and other parameters are recorded automatically and with high precision.

Safety and repeatability: Controlled combustion and automated monitoring ensure consistent and safe testing conditions.

Accessories

Enclosed radiation test chamber with integrated chimney

3-phase electric heating plate with PID temperature control

Pneumatic sliding drawer for sample insertion and removal

Propane burner with 0.15 mm nozzle

Laser pointer for flame spread measurement

Thermocouples and mounting accessories

Water-cooled heat flux measurement system

Standard and short sample holders

Computer and printer with data acquisition system

Test Procedures

Install the sample in the test chamber using the pneumatic drawer and proper sample holder.

Connect the propane supply and compressed air system.

Activate the radiation source to achieve the desired thermal flux and preheat the sample.

Ignite the sample using the propane burner positioned 51 mm above the sample plane.

Monitor flame spread using the laser pointer and record temperature, heat flux, and ignition parameters via the data acquisition system.

Test duration is automatically recorded and ends at the set time or upon completion of flame propagation.

After testing, remove the sample and inspect the chamber for maintenance and cleaning.

Maintenance Information

Regularly clean the test chamber, radiation plate, and propane burner to ensure uniform heating and accurate measurements.

Calibrate thermocouples, heat flux system, and data acquisition equipment periodically.

Verify the pneumatic drawer and sample holders are operating smoothly.

Check propane and compressed air supplies before each test.

Maintain ambient temperature between 10–35°C for consistent testing conditions.

Other supplier products

	Soiling and Abrasion in Photovoltaics Test System	Whats/App: +86 156 1874 6768 Web: standard-groups.com Standard VDI 3956-1 Technical data ParameterUnitValue Air flow velocity m/s ...
	Medical Laboratory Glove Testing Equipment Manufacturer	Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com The medical glove water-impermeability tester is used to determine the water-...
	AATCC128 Fabric crease recovery tester	Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com The Fabric Wrinkle Bending Tester is a specialized instrument used to assess ...
	Residual Ethylene Oxide Gas Chromatography System	Whats/App: +86 156 1874 6768 Web: standard-groups.com The Residual Ethylene Oxide Gas Chromatography System is a professional analytical instrume...
	Deval abrasion testing machine	Whats/App: +86 156 1874 6768 Web: standard-groups.com Product Introduction: Diphal abrasion testing machine is mainly used for stone abrasion ra...

供应产品

Same products

	Laser Cutting Machines	卖方: Chanxan (Changshu) Laser Technology Co., Ltd.	Laser Cutting Machines PrecisionLaser Cutting Systemsfor Film, Glass & Industrial Materials ...
	Precision Laser Micromachining Machine	卖方: Chanxan (Changshu) Laser Technology Co., Ltd.	Precision Laser Micromachining Machine| Ultrafast Laser Micromachining Systems Chanxan provides ...
	Ultrafast Laser Systems	卖方: Chanxan (Changshu) Laser Technology Co., Ltd.	Ultrafast Laser Systems Femtosecond Laser System Ultra-precision femtosecond laser systemfor hi...
	Industrial Laser Equipment Manufacturer	卖方: Chanxan (Changshu) Laser Technology Co., Ltd.	Industrial Laser Equipment Manufacturer for Precision Cutting, Marking & Micromachining Chan...
	Common Rail Injector Valve F00R J02 012	卖方: 868983	Common Rail Injector Valve F00R J02 012 David Chen