Accurate artificial turf wear tester

Whats/App: +86 156 1874 6768

Web: standard-groups.com

Standards

GB/T 20394-2013: Sports Artificial Turf (China)

BS EN 13672:2004: Determination of Abrasion Resistance of Artificial Surfaces for Sports Areas

BS EN 15306: Determination of Simulated Wear Performance of Artificial Sports Surfaces

FIFA Quality Concept for Football Turf (2006)

FIFA 09: Mechanical Durability and Abrasion Testing Requirements for Artificial Turf

Technical Specifications

Item	Specification
Control System	PLC + Touchscreen operation
Display	7-inch full-color LCD touchscreen
Operation Mode	Manual / Automatic
Data Output	RS232 interface, supports print output
Drive System	Servo motor + Stepper motor + Variable frequency AC motor
Main Drive Motor	1 unit
Height Adjustment Motor	1 unit (Stepper motor)
Horizontal Movement Motor	1 unit (Variable frequency AC motor)
Test Accuracy	Dimension D ±0.2 mm; Position P ±2 mm
Roller Type	Dual-roller structure
Roller Size	2 × 0.3 m
Roller Diameter	118 ± 5 mm
Single Roller Weight	28.500 ± 500 g (including roller, cleats, and shaft)
Abrasion Roller	Cylindrical roller with attached cleats
Test Cycles	Adjustable within standard range
Test Speed	Adjustable within standard range
Power Supply	AC 220 V / 50 Hz
Rated Power	3 kW

Features

Dual independent horizontal and vertical motion systems realistically simulate multi-directional wear on artificial turf

Dual-roller structure with cleated abrasion rollers meets FIFA and EN standards for simulated wear

Test parameters can be flexibly set on the control interface, accommodating different cycle counts and speeds required by various standards

Drawer-style sample design allows easy replacement, inspection of wear, and topping up of infill material

Trench-shaped collection system recovers excess infill to maintain a clean testing environment

Fully transparent protective enclosure allows real-time observation while ensuring safety and noise reduction

Intelligent control system supports continuous cyclic testing with pause and inspection capabilities

Accessories

Category	Item	Description
Standard	Dual-Roller Assembly	Includes cylindrical abrasion rollers with cleats
Standard	Sample Fixture	For positioning and securing turf samples
Standard	Drawer-Style Sample Tray	Facilitates sample replacement and infill addition
Standard	Transparent Protective Cover	Aluminum frame + acrylic panels
Standard	Control System	PLC controller + touchscreen
Consumable	Cleat Assemblies	Replace periodically according to wear
Consumable	Roller Bearings	Maintenance or replacement after prolonged use
Consumable	Infill Material	Added according to test standard requirements

Testing Principle

The device applies repeated rolling and reciprocating motion to artificial turf samples under controlled load, speed, and motion paths. The cleated roller surface simulates athletes’ movements with cleated shoes, including walking, turning, and sprinting.

A combination of random-force abrasion and lateral-motion abrasion prevents predictable wear paths, realistically reflecting the turf’s long-term durability. After the specified wear cycles, the structural changes and mechanical properties of the turf are evaluated.

Operation Instructions

Confirm that sample dimensions, infill height, and compaction meet standard requirements.

Ensure all safety doors are closed during testing; opening a door will automatically stop the device.

Select the correct test program according to the standard, adjusting cycles, speed, and motion mode.

You may pause the device during testing to inspect the sample, but ensure it is fully stopped before opening safety doors.

Regularly check cleat wear to avoid inconsistencies in test results.

Experimental Procedure

Cut and install turf samples according to relevant standards, adjusting height and infill condition.

Set test parameters, including wear method, number of cycles, and running speed.

Start the device to perform random-force or lateral-motion abrasion testing.

The device automatically cycles until the specified wear period is completed.

Remove the sample after testing.

Conduct follow-up performance tests on the worn sample, such as shock absorption, vertical deformation, ball rebound, and rotational resistance.

Other supplier products

	Mattress Fatigue Tester	Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com The Mattress Rollator is a laboratory durability testing system designed to e...
	Battery Diaphragm Gas Permeability Tester	Whats/App: +86 156 1874 6768 Web: standard-groups.com The Battery Diaphragm Gas Permeability Tester is a precision instrument designed to evaluat...
	Safety Helmet Electrical Insulation Tester	Whats/App: +86 156 1874 6768 Web: standard-groups.com The Safety Helmet Electrical Insulation Tester is designed to assess the electrical insulat...
	Battery needling tester	Whats/App: +86 156 1874 6768 Web: standard-groups.com System overview: The cylindrical battery volume expansion in-situ test system provides acc...
	Automated humidifying bottle tester equipment	Whats/App: +86 156 1874 6768 Web: standard-groups.com Applications The humidifier bottle performance tester is mainly used to detect various pro...

供应产品

Same products

	MMA-120 Handheld Arc Welder	卖方: 871183	The MMA-120 Handheld Arc Welder from ChuangLi Electronic Technology Co., Ltd. is designed for con...
	SHX Series Circulating Fluidized Bed Steam Boiler	卖方: Hebei Genjux Boiler Co.,Ltd	Capacity: 10-35 t/hWorking pressure: 1.25-2.5 MPaOperating temperature: 194-400 ℃Applicable to bi...
	YQ(Y)W Series Oil/Gas Fired Vertical Thermal Oil Boiler	卖方: Hebei Genjux Boiler Co.,Ltd	Capacity: 7000-29200 KWOperating pressure: 0.8-1.0 MPaOperating temperature: 320℃Operating mode: ...
	DHL Series Coal-Fired Steam Boilers	卖方: Hebei Genjux Boiler Co.,Ltd	Capacity: 35-75 t/hOperating pressure: 1.25-5.4 MPaOperating temperature: 194-485℃Applicable to b...
	SZL Series Biomass Steam Boiler	卖方: Hebei Genjux Boiler Co.,Ltd	Capacity: 6-35 t/hWorking pressure: 1.0-2.5 MPaOperating temperature: 184-350 ℃Applicable fuel bi...