High-pressure environmental friction and wear tester
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Standards
(GB/T 12583) Technical Conditions for Rubber and Plastic Testing Machines — Applicable to High-Pressure Rotational Friction and Wear Testers
(GB 3142) Determination of Load-Carrying Capacity of Lubricants (Four-Ball Method) — Applicable to Lubrication Performance Testing Using High-Pressure Friction and Wear Testers
Parameters
| Parameter | Specification |
|---|---|
| Maximum Pressure | Up to 200 PSI (1.37 MPa) |
| Load Control | Real-time load control |
| Measurement | Friction and wear measurement |
| Pressure Sensor | Capacitive high-pressure sensor |
| Temperature Range | −35 °C to 100 °C |
| Load Range | 5 N to 2000 N |
Features
Rigid high-pressure chamber structure for safe and stable testing
Capacitive force and pressure sensing for real-time monitoring
Programmable pressure control under high-pressure conditions
Online measurement of friction force, wear depth, and temperature
Wide load range suitable for diverse high-pressure tribological applications
High operational reliability and test repeatability
Accessories
(1) High-pressure test chamber
(2) Ball-on-disk test fixture
(3) Pin-on-disk test fixture
(4) Capacitive high-pressure sensor
(5) Temperature control module
Test Procedures
Install the selected ball-on-disk or pin-on-disk fixture and mount the test specimens securely.
Seal the high-pressure chamber and set the target pressure, load, and temperature parameters.
Introduce the test gas or lubricant according to the test requirement.
Start the test sequence with real-time monitoring of friction force, wear, pressure, and temperature.
After test completion, release pressure safely and remove specimens for wear evaluation.
Maintenance Information
Regular inspection of the high-pressure chamber seals is recommended to ensure pressure integrity.
The capacitive pressure and force sensors should be checked periodically to maintain measurement accuracy.
After testing corrosive gases or lubricants, the chamber and fixtures should be cleaned to prevent residue accumulation.
Routine verification of temperature and load control systems helps ensure long-term reliability and repeatability.
在线联系供应商
Other supplier products
 |
Battery Powder Compaction Density Evaluation System | Whats/App: +86 156 1874 6768 Web: standard-groups.com Application (1) Measurement of tapped density and compaction characteristics of lithium-io... |
 |
Ink printing durability test machine | Whats/App: +86 156 1874 6768 Web: standard-groups.com Product Usage: Printing ink Decolorization test machine, also known as abrasion tester, fr... |
 |
F313 Smoke Density Tester ASTM E662 & ISO 5659 Compliant | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com The F313 Plastic Smoke Density Tester is a precision instrument designed to m... |
 |
Hot Tack Tester / Heat Seal Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Hot Tack Tester/Heat Seal Tester is specifically designed for testing the heat-adhesion... |
 |
Heat Flow Method for Thermal Conductivity Measurement | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards The instrument complies with and references the following international and nati... |
Same products
 |
MMA-120 Handheld Arc Welder | 卖方: 871183 | The MMA-120 Handheld Arc Welder from ChuangLi Electronic Technology Co., Ltd. is designed for con... |
 |
SHX Series Circulating Fluidized Bed Steam Boiler | 卖方: Hebei Genjux Boiler Co.,Ltd | Capacity: 10-35 t/hWorking pressure: 1.25-2.5 MPaOperating temperature: 194-400 ℃Applicable to bi... |
 |
YQ(Y)W Series Oil/Gas Fired Vertical Thermal Oil Boiler | 卖方: Hebei Genjux Boiler Co.,Ltd | Capacity: 7000-29200 KWOperating pressure: 0.8-1.0 MPaOperating temperature: 320℃Operating mode: ... |
 |
DHL Series Coal-Fired Steam Boilers | 卖方: Hebei Genjux Boiler Co.,Ltd | Capacity: 35-75 t/hOperating pressure: 1.25-5.4 MPaOperating temperature: 194-485℃Applicable to b... |
 |
SZL Series Biomass Steam Boiler | 卖方: Hebei Genjux Boiler Co.,Ltd | Capacity: 6-35 t/hWorking pressure: 1.0-2.5 MPaOperating temperature: 184-350 ℃Applicable fuel bi... |
