Automotive Wire Adhesion Tester
Get a quote：
Whats/App: +86 185 0176 3615
Web: qinsun-lab.com
The Automotive Wire Adhesion Tester is designed to evaluate the bonding strength of automotive wires and components under dynamic and quasi-static conditions. You can accurately assess material adhesion performance across a range of temperatures and impact energies, ensuring compliance with international automotive and adhesive standards for R&D, quality control, and regulatory verification.
Application
This tester is suitable for:
(1) Automotive wire harnesses and insulation adhesion testing.
(2) Adhesive bonding evaluation for door panels, bumper assemblies, engine bay modules, and windshield components.
(3) Research and development of adhesives and bonding materials used in automotive applications.
(4) Quality control and production verification of bonded wire assemblies and automotive modules.
Standards
(1) ISO 11343 – Wedge-peel impact test for adhesion of adhesives
(2) ASTM D4501 – Adhesive peel and impact testing
(3) SAE J840 – Adhesive bonding test for automotive components
(4) ECE R94 – Vehicle crash and safety standard
(5) FMVSS 212 – Federal motor vehicle safety standard for occupant protection
(6) GB 11557 – Automotive adhesive test standards (China)
Parameters
| Parameter | Specification |
|---|---|
| Impact Energy Range | 5–500 J, adjustable in 1 J increments |
| Temperature Range | -40°C to +150°C (±2°C stability) |
| Test Speed | 0.1–5.0 m/s (programmable acceleration) |
| Force Measurement | 0–10 kN (±0.5% FS accuracy) |
| Data Sampling Rate | 100 kHz (10,000 points/sec) |
| Capacity | 50 kg |
| Test Stroke | 400 mm |
| Speed Range | 10–300 mm/min |
| Power System | AC servo motor |
| Power Requirement | 220V AC, 50/60Hz, 3-phase, 15A |
| Dimensions (W×D×H) | 1800 × 900 × 2200 mm |
| Volume | 80 × 60 × 170 cm |
| Weight | 200 kg (tester), 850 kg crated |
| Control Method | Computer software-controlled |
| Adhesion Fixture | One set; wire passing holes: φ1.4, φ1.5, φ1.7, φ1.8, φ2.0, φ2.1, φ2.12, φ2.8, φ3.3, φ3.8 |
在线联系供应商
Other supplier products
 |
Oil Filter Hydrostatic Breakage Tester | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com Applications The Oil Filter Hydrostatic Breakage Tester is a test bench independe... |
 |
Textile Flatness Tester | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com Applications The Textile Flatness Tester is ideal for industries and scenarios in... |
 |
Air Jet Erosion Tester | Get a quote： Web: qinsun-lab.com Email：serving@qinsun-lab。com Application The Air Jet Erosion Tester is used to assess erosion behavior by expo... |
 |
Multi-Finger Scratch/Mar Tester | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com Multi-finger scratch/wear testers are widely used in materials science, engineerin... |
 |
Oxygen Index Tester - Test Equipment | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com Limiting Oxygen Index Tester The oxygen index of the material refers to the minimu... |
Same products
 |
HDPE高速水冷双壁波纹管生产线 | 卖方: Shandong HUASU Plastic Technology Co.,Ltd. | 机头模具采用双流道结构、氮化磨光处理机头，偏壁调整方便快捷，保证内外层壁厚均匀和稳定成型。 最新设计密闭压力水冷冷却结构，冷却充分，多点分布真空系统，效率更高，生产速度更快。 双层在线扩口功... |
 |
PanEVAP & MVR system | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat... |
 |
PanGAP wide gap welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel... |
 |
PanBloc welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac... |
 |
PanBox welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBox welded plate heat exchangerconsists of a laser welded plate pack with optimized corrugated... |
