Automotive Wire Adhesion Tester
Get a quote：
Whats/App: +86 185 0176 3615
Web: qinsun-lab.com
The Automotive Wire Adhesion Tester is designed to evaluate the bonding strength of automotive wires and components under dynamic and quasi-static conditions. You can accurately assess material adhesion performance across a range of temperatures and impact energies, ensuring compliance with international automotive and adhesive standards for R&D, quality control, and regulatory verification.
Application
This tester is suitable for:
(1) Automotive wire harnesses and insulation adhesion testing.
(2) Adhesive bonding evaluation for door panels, bumper assemblies, engine bay modules, and windshield components.
(3) Research and development of adhesives and bonding materials used in automotive applications.
(4) Quality control and production verification of bonded wire assemblies and automotive modules.
Standards
(1) ISO 11343 – Wedge-peel impact test for adhesion of adhesives
(2) ASTM D4501 – Adhesive peel and impact testing
(3) SAE J840 – Adhesive bonding test for automotive components
(4) ECE R94 – Vehicle crash and safety standard
(5) FMVSS 212 – Federal motor vehicle safety standard for occupant protection
(6) GB 11557 – Automotive adhesive test standards (China)
Parameters
| Parameter | Specification |
|---|---|
| Impact Energy Range | 5–500 J, adjustable in 1 J increments |
| Temperature Range | -40°C to +150°C (±2°C stability) |
| Test Speed | 0.1–5.0 m/s (programmable acceleration) |
| Force Measurement | 0–10 kN (±0.5% FS accuracy) |
| Data Sampling Rate | 100 kHz (10,000 points/sec) |
| Capacity | 50 kg |
| Test Stroke | 400 mm |
| Speed Range | 10–300 mm/min |
| Power System | AC servo motor |
| Power Requirement | 220V AC, 50/60Hz, 3-phase, 15A |
| Dimensions (W×D×H) | 1800 × 900 × 2200 mm |
| Volume | 80 × 60 × 170 cm |
| Weight | 200 kg (tester), 850 kg crated |
| Control Method | Computer software-controlled |
| Adhesion Fixture | One set; wire passing holes: φ1.4, φ1.5, φ1.7, φ1.8, φ2.0, φ2.1, φ2.12, φ2.8, φ3.3, φ3.8 |
Send product request
Other supplier products
 |
Universal Wear Tester(UWT) | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com Universal Wear Tester (UWT) is used to determines the wear and abrasion resistance... |
 |
Split-Body Counterweight Dummy - Hollow | ASTM ISO Testing Machine | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com Split-Body Counterweight Dummies are widely used by automotive manufacturers both ... |
 |
High Temperature Dielectric Strength Oil Heated Tester | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com High temperature voltage breakdown tester (oil heating) is mainly suitable for sol... |
 |
Sublimation Fastness Tester/Scorch Tester - Test Equipment | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com Color fastness tester for ironing sublimation - Testing instrument for ironing col... |
 |
Fabric Down-Proof Impact Tester | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Fabric Down-Proof Impact Tester uses a controlled impact method to evaluate th... |
Same products
 |
MMA-120 Handheld Arc Welder | Seller: 871183 | The MMA-120 Handheld Arc Welder from ChuangLi Electronic Technology Co., Ltd. is designed for con... |
 |
SHX Series Circulating Fluidized Bed Steam Boiler | Seller: Hebei Genjux Boiler Co.,Ltd | Capacity: 10-35 t/hWorking pressure: 1.25-2.5 MPaOperating temperature: 194-400 ℃Applicable to bi... |
 |
YQ(Y)W Series Oil/Gas Fired Vertical Thermal Oil Boiler | Seller: Hebei Genjux Boiler Co.,Ltd | Capacity: 7000-29200 KWOperating pressure: 0.8-1.0 MPaOperating temperature: 320℃Operating mode: ... |
 |
DHL Series Coal-Fired Steam Boilers | Seller: Hebei Genjux Boiler Co.,Ltd | Capacity: 35-75 t/hOperating pressure: 1.25-5.4 MPaOperating temperature: 194-485℃Applicable to b... |
 |
SZL Series Biomass Steam Boiler | Seller: Hebei Genjux Boiler Co.,Ltd | Capacity: 6-35 t/hWorking pressure: 1.0-2.5 MPaOperating temperature: 184-350 ℃Applicable fuel bi... |
