ASTM button impact resistance test
Get a quote：
Whats/App: +86 156 1874 6768
Web: standard-groups.com
With the equipment the impact resistance of plastic sew-through flange buttons can be determined that a falling mass of 0.84kg (29.5oz) is released from a height of 67mm (2.625inch) or other heights as required. Cracking, chipping or breakage constitute failure.
Application
Button falling weight impact testeris used to determine the impact resistance of plastic sew-through flange buttons to a falling mass of 0.84kg (29.5oz), released from a height of 67mm (2.625 inches) or other heights as required. Evaluation Cracking, chipping and breakage, any of which constitutes damage. Test the remaining specimens.
Standards
ASTM D5171: Test Method for Abrasion Resistance of Inks and Coatings (referenced for impact-related durability assessments).
Features
1. Ensure the vertical alignment of tension;
2. Fixed button edge without affecting its adhesion;
3. Consistent force of 10s continuously;
4. Elevate and fix the position of the test meter through the handle, easy to change samples
5. Horizontal hand wheel, designed to cooperate with ergonomic principles to make operators more comfortable;
6. Safety buckle design makes operation more secure and reliable;
7. The long machine frame can extend the test scope more widely;
8. The concealed spring is designed to greatly increase the pin tightening and ensure the test repeatability;
9. Can reduce the damage caused by slid leakage during test process;
10. Simple design and accurate test results.
Parameter
| Parameter | Specification |
|---|---|
| Operating Mode | Manual |
| Impact Head Weight | 0.84kg |
| Impact Height | 32mm, 44mm, 67mm, 83mm, 95mm, 117mm |
| Body Material | Stainless Steel / Brushed Finish |
| Instrument Weight | 5kg |
| Power Supply | No (Manual Operation) |
| Appearance Size | 100mm (L) × 150mm (W) × 300mm (H) |
Accessoriess
The accessories for push-button impact drills (often referring to impact drills or similar equipment) mainly include the following types, each serving a different function to ensure the normal operation of the equipment:
Switch accessories: such as impact drill switches and gear selector switches, used to control the start, stop, and gear switching of the equipment, are key components for operating the push-button impact drill.
Transmission and impact components: including motors, shafts, sleeves, ratchet mechanisms, etc. These components work together to convert electrical energy into mechanical energy to achieve the impact function. For example, the motor drives the shaft to rotate, the shaft drives the sleeve and ratchet mechanism to move, thereby generating impact force.
Drill bits and chucks: The drill bit is the component that directly performs the drilling operation, while the chuck is used to fix the drill bit and ensure its stable operation. Different specifications and types of drill bits can be replaced according to the operation requirements.
Protective and auxiliary accessories: such as dust covers and limit ropes. Dust covers prevent dust generated during drilling from entering the equipment and protect it from damage; limit ropes are used to control the range of motion of the impact components and prevent them from separating from the main body of the equipment.
Battery and charger (for electric models): Provides power to the electric push-button impactor, ensuring continuous operation. Battery capacity and performance directly affect the device's runtime and efficiency.
在线联系供应商
Other supplier products
 |
Automotive Heel Abrasion Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com The VW Heel Abrasion Tester is designed to evaluate the wear resistance of floor covering m... |
 |
Particle Strength Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Particle Strength Tester is a high-precision instrument designed to measure the mechani... |
 |
Contact Coolness Tester STD-QM，JIS L 1927 contact cooling experience analyzer | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Contact Coolness Tester is used to evaluate the instantaneous cool or warm sensation ge... |
 |
Bending Test device | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Pure Bending Tester analyzes hand movements-referred to as "bending"-performed by artis... |
 |
Advanced Hard Hat Deformation Resistance Tester for Certification | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards The tester complies with the following standards: (1) GB 2812 &nd... |
Same products
 |
ER4047 Aluminum Mig Welding Wire | 卖方: 868776 | Hangzhou Kunli Welding Materials Co., Ltd. specializes in manufacturing reliable welding material... |
 |
ER4043 Silicon Aluminum Welding Wire | 卖方: 868776 | Hangzhou Kunli Welding Materials Co., Ltd. specializes in manufacturing high-quality welding mate... |
 |
Choosing the Right Equipment for Heavy-Duty Cleaning | 卖方: Taizhou Feike Mechanical Technology Co., Ltd. | FEIKE’s High Pressure Washer is designed for industrial cleaning, equipment maintenance, ve... |
 |
ER4043 Silicon Aluminum Welding Wire | 卖方: 868776 | Hangzhou Kunli Welding Materials Co., Ltd. offers ER4043 Silicon Aluminum Welding Wire for alumin... |
 |
HDPE高速水冷双壁波纹管生产线 | 卖方: Shandong HUASU Plastic Technology Co.,Ltd. | 机头模具采用双流道结构、氮化磨光处理机头，偏壁调整方便快捷，保证内外层壁厚均匀和稳定成型。 最新设计密闭压力水冷冷却结构，冷却充分，多点分布真空系统，效率更高，生产速度更快。 双层在线扩口功... |
