Random Tumble Pilling Tester
Getaquote:
Whats/App: +86 181 0160 0864
The Random Tumble Pilling Tester is a precision instrument specifically designed to test the pilling performance of textiles. Its advanced tumbling test principle accurately simulates the pilling behavior of textiles during actual wear, and it is widely used in textile manufacturing companies, quality inspection institutions, and research units.
Applications
This instrument is widely used in the following fields:
Testing
Quality inspection
Apparel fabrics and home textiles
Textile manufacturing companies
Fair testing by third-party testing institutions
Standards
GB/T 4802.3: China’s national standard for textile pilling resistance.
BS EN ISO 12945-1: European standard for wool-based textile pilling evaluation.
BS 5811. IWS TM152. NEXT TM19: UK retail and industrial specifications.
M&S P18A/P18B/P21A: Marks & Spencer’s proprietary quality benchmarks.
BS 8479: British standard for fabric snagging resistance.
Features
Modular Test Chambers: 4 dedicated pilling boxes (octagonal) and 2 snagging boxes for comprehensive analysis.
Rapid Mounting Jig: Simplifies sample fixation with quick-release clamps.
Accessories Kit: Includes cork liners, snagging points, and a pilling photograph guide for visual grading.
Motor Safety System: Overload protection and thermal cutoff prevent equipment damage.
Customizable Cycles: Users define test duration and reversal intervals via the LCD interface.
Compact Footprint: Space-saving design with integrated storage for accessories.
Technical Parameters
| Technical Parameters | Specifications |
|---|---|
| Test Mode | Automatic |
| Rotation Direction | Unidirectional / Bidirectional (Reversing) |
| Rotation Speed Options | 20rpm, 30rpm, 40rpm, 45rpm, 50rpm, 60rpm, 65rpm, 70rpm |
| Standard Speed Modes | 1. 60rpm Unidirectional 2. 30rpm Unidirectional 3. 30rpm Bidirectional |
| Working Chamber | 4 Chambers |
| End Alarm | Buzzer |
| Steel Nails Material | Stainless Steel |
| Power Supply | 220V, 50Hz |
| Weight | 75 kg |
| Dimensions |
900mm × 800mm × 1100mm |
Test Procedures
1. Pre-operation Preparation
Environmental Adjustment: Adjust the test environment to standard atmospheric conditions for textiles (in accordance with ISO 105-A01/GB/T 6529): temperature 20±2℃, relative humidity 65±3%; condition the instrument, samples, and consumables (such as backing fabric) in this environment for at least 4 hours (if conditioning is not required for the test, follow the corresponding standard).
Instrument Inspection: Connect the appropriate power supply (e.g., AC 220V/50Hz), start the instrument without load, and confirm that the heating plate temperature stability, pressure device (weight) accuracy, and timing module function are all normal, without any abnormal noise or fault indications.
Consumables Preparation: Prepare the auxiliary materials according to the corresponding standards, such as ISO 105-F02 standard cotton backing fabric, anti-staining backing fabric, sample fixing clamps, etc.
2. Sample Preparation
Cut the samples according to the test item (ensure no wrinkles, damage, or stains):
Heat Pressing/Sublimation Color Fastness Test: Cut into 100mm×40mm rectangles, taking one representative sample each from the warp and weft directions;
Bleached Fabric Yellowing Test: Cut into 150mm×150mm squares;
Reactive Dye Water Fastness Test: Cut into 100mm×40mm, and after wetting according to GB/T 5718 requirements, squeeze out excess water to the specified moisture content. 3. Test Parameter Settings
Set the parameters on the control panel according to the target standard (e.g., ISO 105 X11. GB/T 5718):
Mode Selection: Corresponding to the test type (e.g., "Dry Heat Sublimation," "Heat Press Resistance," "Yellowing Test");
Temperature: Set according to the standard (e.g., sublimation color fastness 180±2℃, heat press resistance 150±2℃, yellowing test 180±2℃);
Pressure: Set to 4 kPa for heat press resistance testing (matching the weight of the standard weight in ISO 105 X11), no additional pressure is required for sublimation/yellowing tests;
Time: Set according to the standard (e.g., sublimation 30±1s, heat press resistance 15±0.5s, yellowing test 10±0.5min).
4. Sample Loading and Test Operation
Heat Press Resistance Test: Place the sample between two layers of standard cotton lining fabric, lay it flat on the center of the heating plate, close the press head to apply pressure, and start the timing program;
Sublimation Color Fastness Test: Fix the sample and standard lining fabric separately on the sample holder and lining fabric holder (maintaining the standard distance), close the test chamber door, and start the dry heat program;
Yellowing Test: Lay the sample flat on the heating plate (without lining fabric), ensure sufficient contact, and then start the dry heat timing;
Water Staining Fastness Test: Stack the moistened sample and lining fabric, load according to the heat press resistance procedure, adjust to the corresponding water staining temperature, and then start the test.
5. Post-processing and Result Evaluation
After the test, wait for the instrument to cool to room temperature, and then remove the sample and lining fabric;
Use the corresponding gray scale (e.g., ISO 105-A02 for evaluating sample discoloration, ISO 105-A03 for evaluating lining fabric staining), and rate the results on a scale of 1-5 (5 being the best);
Record the sample information, test standard, parameters (temperature/pressure/time), and rating.
6. Instrument Cleaning and Maintenance
After turning off the power and allowing the instrument to cool, wipe the heating plate, press head, and sample holder with a dry, soft cloth to remove any residual fibers;
Calibrate the temperature and pressure modules according to the calibration schedule (e.g., every 6 months) to ensure that the testing accuracy meets the standards.
在线联系供应商
Other supplier products
 |
Seatbelt Fabric Pilling Tester | Get a quote： Whats/App: +86 181 0160 0864 The Seatbelt Fabric Pilling Tester is designed to simulate the pilling and wear of garments caused by s... |
 |
Non-contact Color Measuring Instrument | Get a quote: Whats/App: +86 181 0160 0864 The Non-Contact Color Measuring Instrument is a high-precision device designed for color measurement, m... |
 |
Paper Roughness and Air Permeability Tester (TMI) | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk TheTMI Paper Roughness and Air Permeability Testeris a versatile laboratory instru... |
 |
UV Fade Meter Si48 | Get a quote： Whats/App: +86 181 0160 0864 Qinsun UV Long-Life Auto Fade Meter is extensively used for colour fastness test of textile materials. ... |
 |
Martindale Abrasion Tester for Fabric & Textile Durability | Get a quote： Whats/App: +86 181 0160 0864 The Martindale Abrasion Tester is a precision instrument designed to evaluate the abrasion and pilling ... |
Same products
 |
Common Rail Injector Valve F00R J02 012 | 卖方: 868983 | Common Rail Injector Valve F00R J02 012 David Chen |
 |
Common Rail Injector Valve F00R J02 005 | 卖方: 868983 | Common Rail Injector Valve F00R J02 005 David Chen |
 |
Common Rail Injector Valve F00R J01 945 | 卖方: 868983 | Common Rail Injector Valve F00R J01 945 David Chen |
 |
Common Rail Injector Valve F00R J01 941 | 卖方: 868983 | Common Rail Injector Valve F00R J01 941 David Chen |
 |
Common Rail Injector Valve F00R J01 924 | 卖方: 868983 | Common Rail Injector Valve F00R J01 924 David Chen |
