100-V2 steam generator tester
Meet the standard:
The 100-V2 steam generator meets the requirements of Ford FLTM BI 107-05. GMW15919 and FCA LP-463PB-64-01 thermal shock test specifications.
Thermal shock test requirements:
If you are new to thermal shock testing, you may find that an overview of thermal shock testing helps you become more familiar with the various OEM thermal shock testing methods.
Product advantages:
Specifically Designed for Automotive Thermal Shock: Built to provide steam with the precise parameters required for common automotive thermal shock tests involving steam injection.
Meets Major OEM Standards: Complies with the specifications of leading automotive manufacturers like Ford, General Motors (GM), and FCA.
Produces Consistent Steam: Capable of generating consistent steam output, crucial for repeatable test results.
Controllable Steam Parameters: Provides controlled water flow rate and steam dynamic pressure as specified by the test standards.
Part of Approved System: Manufactured by a supplier recognized for automotive thermal shock test equipment, suggesting integration within systems designed to meet industry requirements.
Adjustable Burner: Features an adjustable gas/electric burner for flexible control over the steam generation process.
Product features:
Dedicated steam generator unit (Model 100-V2).
Capability to produce consistent steam output.
Adjustable gas/electric burner for heating and steam generation.
Controlled water flow rate output (2.7 ± 0.1 L/min).
Controlled nozzle steam dynamic pressure output (37.9 ± 1.9 kPa).
Designed to be used in conjunction with high temperature/high pressure steam hoses and a tubular nozzle meeting specific dimensions and material requirements.
Steam equipment:
Steam generator: Capable of producing consistent steam with an adjustable gas/electric burner. The water flow rate is 2.7 +/ -0.1 L/min, and the nozzle steam dynamic pressure is 37.9 +/ -1.9 kPa.
Hose: Can withstand high temperature/high pressure steam
Tubular nozzle: Inner diameter 12.5 +/- 0.3mm, length not less than 100mm, made of non-corrosive material
Model: STD-100-V2
Dynamic Head clamp (DHF) - Dynamic head pressure
See Figure 1-3. Must be able to measure the discharge dynamic head pressure of 37.9±1.9 kPa. Measuring 25 mm from the nozzle, using a 4.7 mm bore tube.
Model: STD-DHF-1
在线联系供应商
Other supplier products
 |
Fabric Wrinkle Bending Tester / AATCC 128 / Textile Tester | Overview The Fabric Wrinkle Bending Tester is a specialized instrument used to assess the wrinkle recovery properties of various textile fabrics. ... |
 |
Sweating Thermal Manikin ASTM F 2371 | Standards: ASTM F 2371 – Standard Test Method for Measuring the Heat Removal Rate of Personal Cooling Systems Using a Sweating Heated Maniki... |
 |
Leather thickness tester | Digital Leather Thickness Gauge | Product Introduction Leather thickness tester is a special high-precision instrument for leather thickness measurement, which can be widely used f... |
 |
Water-cooled Light & Weather Fastness Tester -QINSUN SI 4000 | SI4000 water cooled sunlight fastness tester -The color and properties change of textile dyes can be tested by using argon arc lamp to simulate and... |
 |
Xenon Arc Weatherometer | IntroductionThe xenon arc lamp, which is capable of simulating the whole natural sunlight spectrum in the most consistent manner, can reproduce the... |
Same products
 |
Bottle Wall and Bottom Thickness Tester | 卖方: Standard Group (Hong Kong) Limited | The wall and bottom thickness tester for bottles is a measuring instrument widely used in the pha... |
 |
Pinhole Tester / Pinhole Testing Equipment | 卖方: Standard Group (Hong Kong) Limited | The pinhole tester for aluminum foil is a device specifically used to detect micro - pinholes in ... |
 |
Cork Puncture and Chip Detection Instrument | 卖方: Standard Group (Hong Kong) Limited | The rubber stopper puncture debris detector is a device specifically used to detect the number of... |
 |
Aluminum Ointment Tube Toughness Tester | 卖方: Standard Group (Hong Kong) Limited | The ductility tester for aluminum tubes is a device specifically used to detect the ductility ind... |
 |
Vacuum leak tester / Vacuum leak instrument | 卖方: Standard Group (Hong Kong) Limited | Vacuum Decay Leak Tester specializes in the detection of leaks in ampoules, vials, injection bott... |
