ISO Vertical Fire Resistance Test Furnace for Building Elements
Get a quote：
Whats/App: +86 156 1874 6768
Web: standard-groups.com
The Vertical Fire Resistance Test Furnace for Building Elements is designed for fire resistance testing of vertical building components, including non-loadbearing vertical partitions, fire doors, and fire shutters. The furnace is manufactured in accordance with the technical requirements of GB/T 9978. integrating the furnace body, furnace roof, steel test platform, exhaust and air supply system, combustion and gas supply system, and a comprehensive test control system.With built-in calibration capability, the system ensures that furnace temperature, pressure values, and distribution meet standard requirements, making it suitable for standardized fire resistance testing and performance evaluation of vertical building elements.
Standards
The equipment complies with the following standards:
(1) GB/T 9978.4-2008 – Fire Resistance Tests — Elements of Building Construction — Part 4: Specific Requirements for Loadbearing Vertical Separating Elements
(2) GB/T 9978.8-2008 – Fire Resistance Tests — Elements of Building Construction — Part 8: Specific Requirements for Non-loadbearing Vertical Separating Elements
(3) GB/T 7633-2008 – Fire Resistance Test Methods for Doors and Shutters
(4) ISO 834 – Fire Resistance Tests — Elements of Building Construction
(5) EN 1363 – Fire Resistance Tests for Building Elements
Features
Stable Furnace Structure
Frame-type furnace body with refractory bricks and high-temperature insulation fiber ensures thermal stability while minimizing heat loss to the surrounding environment.
Safe and Practical Platform Design
Steel platforms are installed around the furnace to facilitate operator movement and on-site inspection.
Automatic Flame-Out Protection
If a burner extinguishes unexpectedly, the control system immediately triggers visual and audible alarms and automatically cuts off the LPG supply to the affected burner while allowing other burners to operate normally.
Comprehensive Gas Supply Control
Equipped with gas solenoid valves, proportional valves, ball valves, and gas transmitters to ensure accurate gas flow control and operational safety.
Optimized Combustion Air Control
Combustion air is supplied by a dedicated blower with frequency control to maintain an appropriate air–fuel ratio.
Independent Control System
Dedicated control components are used to manage combustion processes and accurately simulate standard fire curves.
Automatic Temperature Curve Correction
The actual furnace temperature curve is continuously compared with the preset curve, and deviations are automatically corrected through burner output adjustment.
Complete Data Storage
All automatic control and test data are stored in the computer system for traceability and accuracy verification.
Parameters
| Item | Specification |
|---|---|
| Number of Burners | 12 proportional flat-flame burners (6 on each side, 5 m furnace length) |
| Operating Temperature | Maximum test temperature 1250 °C |
| Design Temperature | 1350 °C |
| Combustion Mode | Low-speed proportional flat-flame diffusion combustion |
| Gas & Air Pressure | ≤ 4000 Pa |
| Flame Length | ≤ 500 mm |
| Furnace Temperature Measurement Points | 9 points |
| Thermocouple Sleeve Extension | ≥ 25 mm |
| Temperature Accuracy | < ±15 °C |
| Fuel Gas | Liquefied petroleum gas |
| Equipment Dimensions | 3 m (W) × 3 m (L) × 1.25 m (H) |
| Power Supply | AC 380 V, 70 kW |
| Equipment Weight | Approx. 5 t |
在线联系供应商
Other supplier products
 |
Bone Plates Static Four - point Bending Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standard YY/T 0342-2022: Chinese standard specifying methods for determining bending stren... |
 |
Photovoltaic module backplane peeling strength testing machine | Whats/App: +86 156 1874 6768 Web: standard-groups.com Introduction: The Photovoltaic Module Backplane Peeling Strength Testing Machine is a spec... |
 |
SO2 H2S HCL Corrosion Test Equipment | Whats/App: +86 156 1874 6768 Web: standard-groups.com TheSO₂ H₂S HCl Corrosion Test Equipmentis designed to simulate corrosive environments using... |
 |
High Precision Surgical Needle Strength Testing Instrument Factory | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com The Suture Needle Penetration and Bending Strength Tester is a device used to... |
 |
Seat Belt Webbing Abrasion Resistance Tester for OEM Laboratory | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com The seat belt abrasion tester is used to evaluate the wear resistance of mate... |
Same products
 |
ER4043 Silicon Aluminum Welding Wire | 卖方: 868776 | Hangzhou Kunli Welding Materials Co., Ltd. specializes in manufacturing high-quality welding mate... |
 |
Choosing the Right Equipment for Heavy-Duty Cleaning | 卖方: Taizhou Feike Mechanical Technology Co., Ltd. | FEIKE’s High Pressure Washer is designed for industrial cleaning, equipment maintenance, ve... |
 |
ER4043 Silicon Aluminum Welding Wire | 卖方: 868776 | Hangzhou Kunli Welding Materials Co., Ltd. offers ER4043 Silicon Aluminum Welding Wire for alumin... |
 |
HDPE高速水冷双壁波纹管生产线 | 卖方: Shandong HUASU Plastic Technology Co.,Ltd. | 机头模具采用双流道结构、氮化磨光处理机头，偏壁调整方便快捷，保证内外层壁厚均匀和稳定成型。 最新设计密闭压力水冷冷却结构，冷却充分，多点分布真空系统，效率更高，生产速度更快。 双层在线扩口功... |
 |
PanEVAP & MVR system | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat... |
