Food Sachet Pressure Tester | ISO 11607 Flexible Packaging Test Equipment

Get a quote：

Whats/App: +86 156 1874 6768

Web: standard-groups.com

The pressure resistance tester for sauce packets is a device specifically designed to test the pressure - resistance performance of soft packaging materials such as sauce packets.

Standards

The design and manufacture of the pressure resistance tester for sauce packets usually comply with a series of national and international standards to ensure the accuracy and reliability of test results. These standards may include, but are not limited to:

- Relevant packaging pressure - resistance strength test standards such as GB/T 10004. These standards specify the test methods for the pressure - resistance performance of packaging materials, specimen preparation, test conditions, etc.

- Specific food packaging safety standards, such as the safety standards for food - contact materials, to ensure that the products will not be contaminated or endangered during the testing process.

Features

1. Multi-station synchronous testing: Standard configuration includes a 6-station testing station, capable of testing 6 samples at a time. Customization with additional stations is supported to meet the sampling inspection needs of large-scale production scenarios. A condiment company reported that after using this instrument, the testing time for a single batch was reduced from 2 hours to 20 minutes, a 6-fold increase in efficiency.

2. High-precision sensor system: Employs a 0.1-level precision sensor, supporting multi-range switching (e.g., 0-500N, 0-1000N), accurately capturing minute pressure fluctuations. For example, when testing 0.1mm thick aluminum foil composite film, the instrument can still distinguish a frictional force difference of 0.01N.

3. Intelligent operation and data management: The 7-inch touchscreen supports four-level access control to prevent accidental operation; test data is automatically stored and tamper-proof; a built-in micro-printer can generate reports with one click, complying with GMP and FDA regulations. Optional computer communication software enables data traceability, audit trails, and electronic signature functions.

4. Full-scenario adaptability: Supports pressure testing (simulating stacking pressure) and burst strength testing (determining ultimate pressure resistance), covering the entire life cycle of sauce packets from production to consumption.

Technical Parameters

Technical Parameter	Specification
Test Pressure Range	Usually adjustable within a certain range, such as from 0.1 MPa to 0.7 MPa (equivalent to a pressure of 1 - 50kg) to adapt to different sauce packets and test requirements.
Test Time	Can be set according to actual needs, usually with a wide adjustment range, such as from 1 second to hundreds of thousands of seconds.
Specimen Size	Generally suitable for specimens of certain sizes, and the specific size range may vary depending on the device model. In actual testing, appropriate cutting or adjustment is required according to the size and shape of the sauce packets.
Control System	Modern pressure resistance testers for sauce packets usually adopt advanced control systems, such as micro-computer control or PLC control, to achieve automated operation and precise control. These systems usually have a user-friendly interface and easy-to-operate functions, such as pressure adjustment and data recording.
Data Recording and Analysis	Usually equipped with a data recording system and analysis software, which can automatically record data such as pressure changes and specimen deformation during the test and generate detailed test reports. This data can be used for subsequent product quality analysis and improvement.
Safety Devices	Usually equipped with various safety protection devices, such as emergency stop buttons and overload protection. These devices can quickly cut off the power supply or stop the test in case of an emergency to prevent equipment damage or personal injury.

Accessoriess

1. Multi-size sample clamps: Adaptable to sauce packets of different sizes and shapes, ensuring stable sample fixation during testing;

2. Spare pressure sensor: Used for replacement in case of sensor failure, ensuring the accuracy of pressure test data;

3. Calibration standard weights: Auxiliary equipment for periodic calibration of pressure parameters to maintain test accuracy;

4. Data transmission cable: Connects the instrument to a computer for exporting and storing test data;

5. Sample protective pad: Placed between the sample and the clamp to prevent scratches on the surface of the sauce packet during testing;

6. Spare emergency stop button: A spare part of the emergency protection device, improving equipment safety.

Other supplier products

	Oil Separator Test Rig，ISO 11155 oil droplet separation tester	Whats/App: +86 156 1874 6768 Web: standard-groups.com The Oil Separator Test Rigis designed for automated testing procedures in order to obtain r...
	Solid Split-Type Weighted Dummy Manufacturer	Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com The Solid Split-Type Weighted Dummyis a premium, high-stability ballast syste...
	DIN 51524 hydraulic oil analyzer	Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards You can operate this unit in compliance with the following standards: (1) GB/T ...
	ASTM G154 UV Accelerated Aging Chamber丨UV Accelerated Aging Chamber	Whats/App: +86 156 1874 6768 Web: standard-groups.com Features and Benefits 1.TheUV accelerated aging chamberuses fluorescent ultraviolet lamp...
	Digital sand and dust test chamber	Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com A dust-proof test chamber, also known as a dust test chamber, is a specialize...

供应产品

Same products

	MMA-120 Handheld Arc Welder	卖方: 871183	The MMA-120 Handheld Arc Welder from ChuangLi Electronic Technology Co., Ltd. is designed for con...
	SHX Series Circulating Fluidized Bed Steam Boiler	卖方: Hebei Genjux Boiler Co.,Ltd	Capacity: 10-35 t/hWorking pressure: 1.25-2.5 MPaOperating temperature: 194-400 ℃Applicable to bi...
	YQ(Y)W Series Oil/Gas Fired Vertical Thermal Oil Boiler	卖方: Hebei Genjux Boiler Co.,Ltd	Capacity: 7000-29200 KWOperating pressure: 0.8-1.0 MPaOperating temperature: 320℃Operating mode: ...
	DHL Series Coal-Fired Steam Boilers	卖方: Hebei Genjux Boiler Co.,Ltd	Capacity: 35-75 t/hOperating pressure: 1.25-5.4 MPaOperating temperature: 194-485℃Applicable to b...
	SZL Series Biomass Steam Boiler	卖方: Hebei Genjux Boiler Co.,Ltd	Capacity: 6-35 t/hWorking pressure: 1.0-2.5 MPaOperating temperature: 184-350 ℃Applicable fuel bi...