Rubber Rebound Elasticity Tester
Get a quote：
Whats/App: +86 181 0160 0864
Web: gellowen.co.uk
Rubber elasticity tester, Rubber strikes the resilience elasticity tester for testing vulcanized rubber, experiments, moving iron bars, iron bars so that the end position in the scale of 100. and then the iron bar to fall freely read the fourth, five or six times during the height of spring back against average.
Applications
Used for resilience testing of vulcanized rubber
Standards
ASTM D：Standard Test Method for Rubber Property—Resilience by Vertical Rebound
Features
Device Structure: column, specimen holder, frame, dropping, impact head, dials.
Rubber elasticity tester / Rubber impact resilience tester is mainly made by the base unit and which can read head impact rebound height device component, wherein the base unit sturdy, heavy impact to support the head and the test piece.
In order to adjust and test equipment inspection, the instrument will be able to stand the impact head and made into a detachable device.
The impact head: impact head is to use four lines hanging in places overhanging diameter 2000mm 12.50 ± 0.05mm, length 356mm, the quality of 0.35 ± 0.01kg iron rods. To fall from the high gravity at 100mm as impact energy, the fight against iron bars to end hemispherical surface.
Dial: In order to directly read resiliency, dial scale values are displayed (resilience straightforward reading scale). Interval scale using the horizontal direction of seeking to retrieve flexibility required conversion table or conversion formula.
Technical Parameters
| Parameter | Specification |
|---|---|
| Specimen diameter | 29.5mm |
| Impact head specifications | Diameter: 12.5mm; Length: 356mm; Weight: 350g |
| Horizontal length scale | 625 (L), 2000 (R) MM |
| Dropped Length | 2000mm (from front to back 250mm, about 900mm distance) |
| Scale vertical height | 100mm (divided into 100 equal parts) |
| Drop height | 100mm (vertical) |
| Volume (about) | 117cm × 92cm × 275cm |
| Weight (approximately) | 70kg |
Accessoriess
The experimental setup mainly consists of a base and a device for reading the rebound height of the impact head. The base is sturdy and heavy to support the impact head and test piece. For adjustment and inspection of the setup, the impact head and base can be detached.
Impact Head: The impact head is an iron rod with a vertical diameter of 12.50 ± 0.05 mm, a length of approximately 356 mm, and a mass of 0.35 ± 0.01 kg, suspended at a height of 2000 mm by four suspension lines. The impact energy is the force of gravity falling from a height of 100 mm. The striking end of the iron rod is hemispherical.
Scale: To directly read the rebound height, the scale displays the value (direct reading of the rebound rate). When using horizontally spaced graduations to calculate the rebound height, a conversion table or a different calculation formula is required.
Test Procedures
1. Sample Preparation
The sample surface should be flat and free of defects to ensure the accuracy of the test results.
2. Environmental Control
The temperature and humidity of the testing environment should meet the standard requirements to avoid the influence of environmental factors on the results.
3. Equipment Calibration
The equipment should be calibrated regularly to ensure testing accuracy.
4. Safe Operation
Equipment safety regulations should be followed during operation to avoid accidents.
在线联系供应商
Other supplier products
 |
Spinous Process Fixation Plate System Fatigue Testing Machine | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Spinous Process Fixation Plate System Fatigue Testing Machine is a specialized... |
 |
ink abrasion tester / Ink Abrasion Resistance Tester Ink Rub Tester | Ink abrasion testerPrinciple: To be ground layer and Friction Paper of the Ink Abrasion tester samples, under the action of the load friction body... |
 |
Haptic Skill Logger | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Haptic Skill Logger is a measurement and recording system designed to quantita... |
 |
New warm body dummy tester | Product Description In addition to heat dissipation to the surrounding environment through conduction, convection and radiation, the human body al... |
 |
Foam Aerosol Flammability Tester | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Foam Aerosol Flammability Tester is a device used to assess the flammability o... |
Same products
 |
Choosing the Right Equipment for Heavy-Duty Cleaning | 卖方: Taizhou Feike Mechanical Technology Co., Ltd. | FEIKE’s High Pressure Washer is designed for industrial cleaning, equipment maintenance, ve... |
 |
ER4043 Silicon Aluminum Welding Wire | 卖方: 868776 | Hangzhou Kunli Welding Materials Co., Ltd. offers ER4043 Silicon Aluminum Welding Wire for alumin... |
 |
HDPE高速水冷双壁波纹管生产线 | 卖方: Shandong HUASU Plastic Technology Co.,Ltd. | 机头模具采用双流道结构、氮化磨光处理机头，偏壁调整方便快捷，保证内外层壁厚均匀和稳定成型。 最新设计密闭压力水冷冷却结构，冷却充分，多点分布真空系统，效率更高，生产速度更快。 双层在线扩口功... |
 |
PanEVAP & MVR system | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat... |
 |
PanGAP wide gap welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel... |
