ink abrasion tester / Ink Abrasion Resistance Tester Ink Rub Tester
Ink abrasion testerPrinciple:
To be ground layer and Friction Paper of the Ink Abrasion tester samples, under the action of the load friction body, rubbing each other at a predetermined speed. Make measuring the reducing amount of the density before and after the friction, or decrease the amount of coating thickness, to determine the wear resistance with the ink layer or coating.
Ink Abrasion tester with Microcomputer control, LCD dynamic display, mechatronics principle, rubbing test set. Before the test, the test requirements of the standard, the number of friction or custom operator input control system, the test can achieve automatic control, and after the end of each test beep.
Control system with power and memory function, which is, after each power cycle, keeping parameters state before the power was last entered. Ink wear tester actuator using high-precision micro-motor gear driven friction body friction linear reciprocating motion
Features:
Microcomputer control, LCD blue large LCD dynamic display, film inching operation panel;
Input Test parameters on keyboard, and also with the power and memory;
The exact implementation of national standards, compatible with international standards;
Control Solutions for printed ink poor wear resistance; low rub resistance, easy to fall off and so on;
Test, effective control of the production process, to avoid return losses due to poor quality.
Compatible with PS version of the photosensitive layer of the abrasion resistance test, make analysis and forecast PS version of the anti-Indian forces
Technical Parameters:
Power supply: AC220V ± 10% 2A 50HZ;
The friction velocity: (21. 43. 85. 106) r / min
Measuring range: (1 to 9999) times;
Friction load: GB: 20N;
ASTM: 0.9kg (2Lb)
Friction distance: 60 mm
machine interface: 3.1 "@ 128 × 64 dot matrix LCD screen (blue), English menu;
Working environment: temperature (20 ± 10) ° C;
Humidity <85%;
Dimensions: 335 × 295 × 295 mm;
Product Weight: about 22 kg;
在线联系供应商
Other supplier products
| Hydrostatic Head Testing Equipment | Hydrostatic Head Tester | Introduction The hydrostatic head tester is designed to test the pressure that the material does not come into contact with the exuded water dropl... | |
| Cleanliness tester | Product Introduction: Cleanliness tester is mainly used for cleanliness detection and analysis of auto parts and new energy power battery parts, w... | |
| PLC liquid crystal touch impact testing machine (simple suspension) | Product Introduction: Liquid crystal touch impact testing machine is mainly used for hard plastics (including sheet, pipe, plastic profile), reinf... | |
| Incline Impact Tester ISO 13355 | Standard ASTM D7748: Impact resistance testing of packaging and transport systems. ISO 13355: Automotive component durability evaluation under ob... | |
| Pumpability tester EN 12723 ISO 5198 | Product Introduction The pumpability tester is dedicated to accurately testing the pumpability of the shield tail seal grease used in shield const... |
Same products
| Bottle Wall and Bottom Thickness Tester | 卖方: Standard Group (Hong Kong) Limited | The wall and bottom thickness tester for bottles is a measuring instrument widely used in the pha... | |
| Pinhole Tester / Pinhole Testing Equipment | 卖方: Standard Group (Hong Kong) Limited | The pinhole tester for aluminum foil is a device specifically used to detect micro - pinholes in ... | |
| Cork Puncture and Chip Detection Instrument | 卖方: Standard Group (Hong Kong) Limited | The rubber stopper puncture debris detector is a device specifically used to detect the number of... | |
| Aluminum Ointment Tube Toughness Tester | 卖方: Standard Group (Hong Kong) Limited | The ductility tester for aluminum tubes is a device specifically used to detect the ductility ind... | |
| Vacuum leak tester / Vacuum leak instrument | 卖方: Standard Group (Hong Kong) Limited | Vacuum Decay Leak Tester specializes in the detection of leaks in ampoules, vials, injection bott... |
















