CE Certified High Frequency Friction Machine Factory
Get a quote：
Whats/App: +86 156 1874 6768
Web: standard-groups.com
The High Frequency Friction Machine is a reciprocating tribological testing instrument designed to study high-frequency friction, wear, and tribological behavior of metals, ceramics, and composite materials under dry or lubricated conditions. You can apply controlled loads up to 1.000 N over a maximum stroke of 25 mm while precisely controlling frequency, temperature, and test sequence via PC interface and dedicated software. The system has been validated through multi-laboratory comparisons during ASTM G133 and ASTM G181 standard development, ensuring high reliability and international recognition.
Standards
You can perform tests in accordance with:
(1) ASTM G133 – Linear Reciprocating Ball-on-Flat Sliding Wear Test
(2) ASTM G181 – Friction Test Method for Piston Rings and Cylinder Liner Materials
(3) ASTM D5706 / D5707 / D6079 – Lubrication and friction-related testing
(4) ASTM G203 / G206 – Friction, wear, and surface failure testing
(5) ISO/DIS 12156-2 – Lubricity evaluation (HFRR related)
(6) BS EN 1071-12 – Advanced ceramics friction and wear testing
(7) CEC F-06-A-96 – Diesel fuel lubricity evaluation
(8) DEF STAN 91-110/1 – Fuel lubrication performance assessment
Parameters
| Parameter | Specification |
|---|---|
| Contact Type | Ball-on-Flat (point contact) / Cylinder-on-Flat (line contact) / Plane contact |
| Optional Contact | Piston ring–cylinder liner |
| Load Range | 5–1.000 N |
| Loading Rate | 50 N/s |
| Frequency Range | 2–50 Hz |
| Maximum Stroke | 25 mm |
| Temperature Range | Ambient to 600°C |
| Heating Power | 800 W |
| Temperature Sensor | K-type thermocouple |
| Friction Force Sensor | Piezoelectric |
| Force Measurement Range | ±500 N |
| Stroke Sensor | Magnetic induction |
| Linearity | 0.50% |
| Motor | 1.1 kW AC vector motor (2048 ppr encoder) |
| Contact Potential | 50 mV DC |
| Software | Software |
| Data Interface | USB (high speed) / Serial (low speed) |
Features
(1) Genuine sinusoidal reciprocating motion (Scotch Yoke) ensures stable, repeatable displacement.
(2) Maximum 25 mm stroke allows effective wear generation compared to short-stroke electromagnetic systems.
(3) Servo and spring combined loading provide precise load control.
(4) Optional reduction gearbox enables ultra-low-speed testing down to 0.01 Hz.
(5) Simultaneous acquisition of low-speed trend and high-speed transient data up to 50 kHz.
(6) Friction noise measurement for analysis of lubrication status and friction stability.
(7) Supports rolling-sliding, fretting, and impact fretting wear simulations.
(8) Modular accessory system enables expansion for diverse engineering tribology applications.
Accessories
Standard Ball-on-Flat Test Assembly – 6 mm / 10 mm balls
Standard Line Contact Tool – Ø6 mm × 16 mm
Optional TE 77/WEAR – Online wear monitoring system
Optional TE 77/PROFILE – In-situ profilometer
Optional Piston Ring Fixture – Adjustable curvature
Optional Inert Gas Chamber – Inert or corrosive atmosphere
Optional Cooling Module – Minimum -50°C
Consumables: Ball specimens – steel, ceramic, etc.
Consumables: Plate specimens – typical 38 × 58 × 4 mm
在线联系供应商
Other supplier products
 |
Nbs Smoke Density Chamber, ASTM E662, ISO 5659，optical density smoke analyzer for plastics | Whats/App: +86 156 1874 6768 Web: standard-groups.com Introduction The main principle is to measure smoke density in a particular space, cable o... |
 |
Automated Oil Thread Leak Testing System | Whats/App: +86 156 1874 6768 Web: standard-groups.com Applications integral visual leak testing of HEPA/ULPA filters Standards This system com... |
 |
Professional Universal Abrasion Resistance Tester for Quality Control Laboratories | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Features 1. Fully automatic testing mode with automatic counting, automatic ... |
 |
Filter Integrity Test System | Whats/App: +86 156 1874 6768 Web: standard-groups.com Application (1) Hydrophobic filter integrity testing (water intrusion test). (2) Hydrophi... |
 |
Reciprocating Friction and Wear Testing Machine | Whats/App: +86 156 1874 6768 Web: standard-groups.com Applicable Standards ASTM Standards: Formulated by the American Society for Testing and Ma... |
Same products
 |
HDPE高速水冷双壁波纹管生产线 | 卖方: Shandong HUASU Plastic Technology Co.,Ltd. | 机头模具采用双流道结构、氮化磨光处理机头，偏壁调整方便快捷，保证内外层壁厚均匀和稳定成型。 最新设计密闭压力水冷冷却结构，冷却充分，多点分布真空系统，效率更高，生产速度更快。 双层在线扩口功... |
 |
PanEVAP & MVR system | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat... |
 |
PanGAP wide gap welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel... |
 |
PanBloc welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac... |
 |
PanBox welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBox welded plate heat exchangerconsists of a laser welded plate pack with optimized corrugated... |
