CE Certified High Frequency Friction Machine Factory
Get a quote：
Whats/App: +86 156 1874 6768
Web: standard-groups.com
The High Frequency Friction Machine is a reciprocating tribological testing instrument designed to study high-frequency friction, wear, and tribological behavior of metals, ceramics, and composite materials under dry or lubricated conditions. You can apply controlled loads up to 1.000 N over a maximum stroke of 25 mm while precisely controlling frequency, temperature, and test sequence via PC interface and dedicated software. The system has been validated through multi-laboratory comparisons during ASTM G133 and ASTM G181 standard development, ensuring high reliability and international recognition.
Standards
You can perform tests in accordance with:
(1) ASTM G133 – Linear Reciprocating Ball-on-Flat Sliding Wear Test
(2) ASTM G181 – Friction Test Method for Piston Rings and Cylinder Liner Materials
(3) ASTM D5706 / D5707 / D6079 – Lubrication and friction-related testing
(4) ASTM G203 / G206 – Friction, wear, and surface failure testing
(5) ISO/DIS 12156-2 – Lubricity evaluation (HFRR related)
(6) BS EN 1071-12 – Advanced ceramics friction and wear testing
(7) CEC F-06-A-96 – Diesel fuel lubricity evaluation
(8) DEF STAN 91-110/1 – Fuel lubrication performance assessment
Parameters
| Parameter | Specification |
|---|---|
| Contact Type | Ball-on-Flat (point contact) / Cylinder-on-Flat (line contact) / Plane contact |
| Optional Contact | Piston ring–cylinder liner |
| Load Range | 5–1.000 N |
| Loading Rate | 50 N/s |
| Frequency Range | 2–50 Hz |
| Maximum Stroke | 25 mm |
| Temperature Range | Ambient to 600°C |
| Heating Power | 800 W |
| Temperature Sensor | K-type thermocouple |
| Friction Force Sensor | Piezoelectric |
| Force Measurement Range | ±500 N |
| Stroke Sensor | Magnetic induction |
| Linearity | 0.50% |
| Motor | 1.1 kW AC vector motor (2048 ppr encoder) |
| Contact Potential | 50 mV DC |
| Software | Software |
| Data Interface | USB (high speed) / Serial (low speed) |
Features
(1) Genuine sinusoidal reciprocating motion (Scotch Yoke) ensures stable, repeatable displacement.
(2) Maximum 25 mm stroke allows effective wear generation compared to short-stroke electromagnetic systems.
(3) Servo and spring combined loading provide precise load control.
(4) Optional reduction gearbox enables ultra-low-speed testing down to 0.01 Hz.
(5) Simultaneous acquisition of low-speed trend and high-speed transient data up to 50 kHz.
(6) Friction noise measurement for analysis of lubrication status and friction stability.
(7) Supports rolling-sliding, fretting, and impact fretting wear simulations.
(8) Modular accessory system enables expansion for diverse engineering tribology applications.
Accessories
Standard Ball-on-Flat Test Assembly – 6 mm / 10 mm balls
Standard Line Contact Tool – Ø6 mm × 16 mm
Optional TE 77/WEAR – Online wear monitoring system
Optional TE 77/PROFILE – In-situ profilometer
Optional Piston Ring Fixture – Adjustable curvature
Optional Inert Gas Chamber – Inert or corrosive atmosphere
Optional Cooling Module – Minimum -50°C
Consumables: Ball specimens – steel, ceramic, etc.
Consumables: Plate specimens – typical 38 × 58 × 4 mm
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Weathering Test System with Solar Simulation | Whats/App: +86 156 1874 6768 Web: standard-groups.com Application This system is widely applied in photovoltaic performance testing and research... |
 |
ASTM E1354 cone calorimeter | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com The Cone Calorimeter is a precision fire-testing instrument designed to evalu... |
 |
Gas Oxidizing Properties Tester | ISO 10156 Oxidizing Gas Analyzer | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Scope of Application and Standards The tester is used to determine whether a... |
 |
ISO Textile Thermal Radiation Temperature Rise Measurement Instrument for Smart Fabrics | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Applications Textile Far Infrared Radiation Temperature Rise Tester is used ... |
 |
Metal Corrosivity Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com standards GB/T 15970 ISO 7539 ASTM G31 GB/T 10125 Scope of Application The metal corr... |
Похожие товары
 |
Laser Cutting Machines | Продавец: Chanxan (Changshu) Laser Technology Co., Ltd. | Laser Cutting Machines PrecisionLaser Cutting Systemsfor Film, Glass & Industrial Materials ... |
 |
Precision Laser Micromachining Machine | Продавец: Chanxan (Changshu) Laser Technology Co., Ltd. | Precision Laser Micromachining Machine| Ultrafast Laser Micromachining Systems Chanxan provides ... |
 |
Ultrafast Laser Systems | Продавец: Chanxan (Changshu) Laser Technology Co., Ltd. | Ultrafast Laser Systems Femtosecond Laser System Ultra-precision femtosecond laser systemfor hi... |
 |
Industrial Laser Equipment Manufacturer | Продавец: Chanxan (Changshu) Laser Technology Co., Ltd. | Industrial Laser Equipment Manufacturer for Precision Cutting, Marking & Micromachining Chan... |
 |
Common Rail Injector Valve F00R J02 012 | Продавец: 868983 | Common Rail Injector Valve F00R J02 012 David Chen |
