Thermal Conductivity Tester (Heat Flow Method)
Get a quote：
Whats/App: +86 181 0160 0864
Web: gellowen.co.uk
Thermal Conductivity Tester (Heat Flow Method) is a high-precision instrument designed for measuring the thermal resistance, thermal conductivity, and interface contact thermal resistance of thin heat conductors, solid electrical insulation materials, thermal grease, resins, rubber, beryllium oxide ceramics, and aluminum oxide ceramics. The device can test solid sheet materials directly, and with the use of a sample frame, it can also measure powdered and paste materials. The tester is designed and manufactured in full compliance with ASTM D5470-2017 standards and has benefited from over 20 years of production experience, ensuring reliability, mature performance, and high testing accuracy. The system features servo-controlled precise automatic pressing, automatic thickness measurement, 6-point temperature gradient detection, and computer-controlled fully automatic operation. The built-in thermal guard around the test rod reduces environmental temperature influence, allowing accurate measurements of thermal conductivity, thermal resistance, and interface contact thermal resistance under varying pressures and temperatures.
The instrument is widely used in universities, research institutions, quality inspection laboratories, and industrial production plants for material thermal property analysis.
Application
This tester is suitable for testing:
Thin heat conductors
Solid electrical insulation materials
Thermal greases, resins, and rubber
Beryllium oxide ceramics and aluminum oxide ceramics
Aluminum substrates, composite boards, and thermal pads
Typical applications include:
Academic research: Measurement of material thermal properties
Industrial quality control: Verifying thermal performance of production materials
R&D labs: Testing new thermal interface materials (TIMs)
Production sites: Monitoring and screening high-thermal-conductivity materials
Standards
The instrument complies with:
MIL-I-49456A – Insulating Sheet Material, Thermally Conductive Resin, Glass-Fiber Reinforced Thermal Materials
GB/T 5598-2015 – Method for Determining Thermal Conductivity of Beryllium Oxide Ceramics
GB/T 29313-2017 – Test Methods for Thermal Conductivity of Electrical Insulation Materials
ASTM D5470-2017 – Test Method for Thermal Transmission Properties of Thin Thermally Conductive Solid Electrical Insulation Materials
Parameters
| Item | Specification |
|---|---|
| Thermal conductivity range | 0.01–50 W/m·K (standard), 5–500 W/m·K (high conductivity mode, automatic software switching) |
| Thermal resistance range | 0.05–500 cm²·K/W |
| Sample size | Φ30 mm or 20×20 mm (standard); custom sizes: Φ15. Φ50. 25.4×25.4 mm |
| Sample thickness | 0.001–50 mm (standard); typical 0.02–20 mm |
| Hot plate temperature range | Room temperature–99.99 °C (standard); optional 299.9 °C or 500 °C |
| Cold plate temperature range | 0–99.99 °C; precision 0.01 °C (with high-precision low-temperature water bath) |
| Pressure range | 0–1000 N; servo motor controlled; precision 0.1 N |
| Thickness measurement range | 0–50 mm; resolution 0.001 mm; automatic |
| Sample quantity | 1 piece (single or stacked layers) |
| Measurement accuracy | Thermal conductivity/thermal resistance ≤3%; contact thermal resistance ≤5% |
| Test modes | Thermal resistance under varying pressures; material thermal conductivity; contact thermal resistance at different pressures; aluminum/composite boards; aging reliability tests; high-conductivity materials; compression performance tests |
| Automation | Computer-controlled fully automatic measurement and report output |
| Power supply | 220 V / 50 Hz; 1000 W |
在线联系供应商
Other supplier products
 |
Air Flow Velocity Distribution Test System | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk Test System for the characterisation of the air flow velocity profile of component... |
 |
Bundesmann Rain Tester | Get a quote: Whats/App: +86 181 0160 0864 The Bundesmann Rain Tester simulates natural rainfall to evaluate the water repellency, wetting behavio... |
 |
Shoelace Abrasion Tester | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Shoelace Abrasion Tester is designed to evaluate the wear resistance of shoela... |
 |
Thermostatic water tank tester丨Thermostatic water tank machine | Scope of application: Thermostatic water tank is widely used in drying, concentrating, distillation, impregnating chemical reagents, impregnating ... |
 |
Paper Gypsum Board Fire Stability Tester | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Paper Gypsum Board Fire Stability Tester is a specialized laboratory instrumen... |
Same products
 |
HDPE高速水冷双壁波纹管生产线 | 卖方: Shandong HUASU Plastic Technology Co.,Ltd. | 机头模具采用双流道结构、氮化磨光处理机头，偏壁调整方便快捷，保证内外层壁厚均匀和稳定成型。 最新设计密闭压力水冷冷却结构，冷却充分，多点分布真空系统，效率更高，生产速度更快。 双层在线扩口功... |
 |
PanEVAP & MVR system | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat... |
 |
PanGAP wide gap welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel... |
 |
PanBloc welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac... |
 |
PanBox welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBox welded plate heat exchangerconsists of a laser welded plate pack with optimized corrugated... |
