Thermal Conductivity Tester (Heat Flow Method)
Get a quote：
Whats/App: +86 181 0160 0864
Web: gellowen.co.uk
Thermal Conductivity Tester (Heat Flow Method) is a high-precision instrument designed for measuring the thermal resistance, thermal conductivity, and interface contact thermal resistance of thin heat conductors, solid electrical insulation materials, thermal grease, resins, rubber, beryllium oxide ceramics, and aluminum oxide ceramics. The device can test solid sheet materials directly, and with the use of a sample frame, it can also measure powdered and paste materials. The tester is designed and manufactured in full compliance with ASTM D5470-2017 standards and has benefited from over 20 years of production experience, ensuring reliability, mature performance, and high testing accuracy. The system features servo-controlled precise automatic pressing, automatic thickness measurement, 6-point temperature gradient detection, and computer-controlled fully automatic operation. The built-in thermal guard around the test rod reduces environmental temperature influence, allowing accurate measurements of thermal conductivity, thermal resistance, and interface contact thermal resistance under varying pressures and temperatures.
The instrument is widely used in universities, research institutions, quality inspection laboratories, and industrial production plants for material thermal property analysis.
Application
This tester is suitable for testing:
Thin heat conductors
Solid electrical insulation materials
Thermal greases, resins, and rubber
Beryllium oxide ceramics and aluminum oxide ceramics
Aluminum substrates, composite boards, and thermal pads
Typical applications include:
Academic research: Measurement of material thermal properties
Industrial quality control: Verifying thermal performance of production materials
R&D labs: Testing new thermal interface materials (TIMs)
Production sites: Monitoring and screening high-thermal-conductivity materials
Standards
The instrument complies with:
MIL-I-49456A – Insulating Sheet Material, Thermally Conductive Resin, Glass-Fiber Reinforced Thermal Materials
GB/T 5598-2015 – Method for Determining Thermal Conductivity of Beryllium Oxide Ceramics
GB/T 29313-2017 – Test Methods for Thermal Conductivity of Electrical Insulation Materials
ASTM D5470-2017 – Test Method for Thermal Transmission Properties of Thin Thermally Conductive Solid Electrical Insulation Materials
Parameters
| Item | Specification |
|---|---|
| Thermal conductivity range | 0.01–50 W/m·K (standard), 5–500 W/m·K (high conductivity mode, automatic software switching) |
| Thermal resistance range | 0.05–500 cm²·K/W |
| Sample size | Φ30 mm or 20×20 mm (standard); custom sizes: Φ15. Φ50. 25.4×25.4 mm |
| Sample thickness | 0.001–50 mm (standard); typical 0.02–20 mm |
| Hot plate temperature range | Room temperature–99.99 °C (standard); optional 299.9 °C or 500 °C |
| Cold plate temperature range | 0–99.99 °C; precision 0.01 °C (with high-precision low-temperature water bath) |
| Pressure range | 0–1000 N; servo motor controlled; precision 0.1 N |
| Thickness measurement range | 0–50 mm; resolution 0.001 mm; automatic |
| Sample quantity | 1 piece (single or stacked layers) |
| Measurement accuracy | Thermal conductivity/thermal resistance ≤3%; contact thermal resistance ≤5% |
| Test modes | Thermal resistance under varying pressures; material thermal conductivity; contact thermal resistance at different pressures; aluminum/composite boards; aging reliability tests; high-conductivity materials; compression performance tests |
| Automation | Computer-controlled fully automatic measurement and report output |
| Power supply | 220 V / 50 Hz; 1000 W |
Send product request
Other supplier products
 |
Geosynthetics Vertical Penetration Tester | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The geosynthetic material vertical permeability tester is a horizontal constant-he... |
 |
High Temperature Voltage Breakdown (Air Heating) Tester | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Computer-Controlled Dielectric Breakdown Tester is a precision instrument desi... |
 |
Twist Compression Tester | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Twist Compression Tester is a laboratory tribology instrument designed to eval... |
 |
Suture Needle Elasticity and Toughness Tester | The Elasticity and Toughness Tester for Suture Needles is a specialized device dedicated to detecting the physical properties of elasticity and tou... |
 |
Paper Gypsum Board Fire Stability Tester | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Paper Gypsum Board Fire Stability Tester is a specialized laboratory instrumen... |
Same products
 |
Laser Cutting Machines | Seller: Chanxan (Changshu) Laser Technology Co., Ltd. | Laser Cutting Machines PrecisionLaser Cutting Systemsfor Film, Glass & Industrial Materials ... |
 |
Precision Laser Micromachining Machine | Seller: Chanxan (Changshu) Laser Technology Co., Ltd. | Precision Laser Micromachining Machine| Ultrafast Laser Micromachining Systems Chanxan provides ... |
 |
Ultrafast Laser Systems | Seller: Chanxan (Changshu) Laser Technology Co., Ltd. | Ultrafast Laser Systems Femtosecond Laser System Ultra-precision femtosecond laser systemfor hi... |
 |
Industrial Laser Equipment Manufacturer | Seller: Chanxan (Changshu) Laser Technology Co., Ltd. | Industrial Laser Equipment Manufacturer for Precision Cutting, Marking & Micromachining Chan... |
 |
Common Rail Injector Valve F00R J02 012 | Seller: 868983 | Common Rail Injector Valve F00R J02 012 David Chen |
