Metallic Cables and Wire Ropes Mechanical Property Testing Equipment Manufacturer | ISO 2408
Get a quote：
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Standards
(1)YY/T 0812-2010 (China): Specifies mechanical testing protocols for metal cables/cables used in fracture fixation, including fatigue strength and load-to-failure requirements.
(2)ASTM F2180-19 (International): Defines methodologies for evaluating the dynamic fatigue performance of orthopedic cable systems under cyclic loading.
(3)ISO 12177-3: Additional compliance for tension-tension fatigue testing of surgical cables.
Product Advantages
(1)Multi-Axial Loading: Simultaneous tension/torsion control replicates in vivo stress patterns (5Hz fatigue cycles).
(2)High-Cycle Endurance: 1.000.000-cycle capacity with ±0.05% load accuracy at 5Hz operation.
(3)Biorelevant Simulation: 37±1°C saline bath with protein skimmer for in vitro corrosion testing.
(4)Smart Fixturing: Self-centering clamps accommodate cables (1.0–5.0 mm diameter) and cable systems.
(5)AI-Powered Analytics: Machine learning identifies fatigue initiation sites in real-time.
(6)Regulatory Compliance: Pre-loaded YY/T 0812/ASTM F2180 protocols with automated reporting.
Product Features
(1)Electromagnetic Servo Actuator: 10 kN tensile/5 Nm torsional capacity with programmable load ratios (R=0.1–10).
(2)Dynamic Load Control: 0.1–30 Hz frequency range with sine/square/random waveforms.
(3)Thermal-Mechanical Chamber: 37±0.5°C recirculating saline bath with anti-evaporation design.
(4)High-Resolution Imaging: Built-in 5MP camera system for fretting/corrosion analysis.
(5)Safety Suite: Emergency stop, overload clutches, and leak detection system.
(6)Modular Design: Dual-station configuration enables simultaneous specimen testing.
Accessories
(1)Cable Fixture Kit:
Self-centering clamps (1.0–5.0 mm cable compatibility)
Torsion adapters for multi-strand cables
(2)Thermal-Mechanical Bath:
20L capacity with recirculating pump
Corrosion-resistant titanium interior
(3)CableTest Pro Software:
Automated S-N curve generation and fatigue limit calculation
21 CFR Part 11-compliant audit trail with blockchain timestamping
Remote monitoring via iOS/Android app
(4)Operator Kit:
Calibrated micrometer set (0.01–1.00 mm)
Cable alignment jigs (ASTM F2180 compliant)
(5)Calibration Bundle:
NIST-traceable force/torque calibration weights
LVDT verification tool
(6)Safety Kit:
Leak detection system
Acoustic enclosure with 25 dB noise reduction
Technical Parameters
| Parameter | Specification |
|---|---|
| Max. Tensile Load | ±10.000 N (0.01 N resolution) |
| Max. Torsional Moment | ±5 Nm (0.001 Nm resolution) |
| Frequency Range | 0.1–30 Hz (0.01 Hz increments) |
| Load Ratio (R) | 0.1–10 (adjustable) |
| Cable Diameter Range | 1.0–5.0 mm (0.01 mm resolution) |
| Saline Bath Temperature | 37±0.5°C (PT1000 sensor) |
| Data Sampling Rate | 10 kHz (synchronized across 8 channels) |
| Power Requirements | 220V/110V ±10%, 50/60Hz, 1.800W |
| Dimensions (W×D×H) | 600 × 500 × 800 mm |
| Weight | 90 kg (net) / 105 kg (with bath) |
| Noise Level | <55 dB (A-weighted) |
在线联系供应商
Other supplier products
 |
ASTM powder compaction density tester for electrode material evaluation | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards (1) ISO 3953 – Determination of tapped density of powders. ... |
 |
Minimum ignition point test machine,Automated dust cloud ignition tester,IEC 61241 | Whats/App: +86 156 1874 6768 Web: standard-groups.com Introduction This machineis a way of testing the sensitivity of the ignition that the dust... |
 |
Micro Controll Constant-Speed Friction Plate Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com A friction and wear testing machine is a device composed of a test force loading system, a ... |
 |
Advanced fireproof coatings small sample furnace | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com TheSmall Sample Test Furnace for Steel Structure Fireproof Coatingis a specia... |
 |
Industrial Linear Reciprocating Friction and Wear Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards GB/T 3960-2016 Plastics – Determination of Sliding Wear Properties GB/T 1... |
Same products
 |
PanEVAP & MVR system | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat... |
 |
PanGAP wide gap welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel... |
 |
PanBloc welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac... |
 |
PanBox welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBox welded plate heat exchangerconsists of a laser welded plate pack with optimized corrugated... |
 |
PanPHE gasketed plate heat exchangers | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanPHE gasketed plate heat exchangersare designed with easy access for regular servicing and for ... |
