.

Metallic Cables and Wire Ropes Mechanical Property Testing Equipment Manufacturer | ISO 2408

Get a quote:

Whats/App: +86 156 1874 6768

Web: standard-groups.com

Standards

(1)YY/T 0812-2010 (China): Specifies mechanical testing protocols for metal cables/cables used in fracture fixation, including fatigue strength and load-to-failure requirements.

(2)ASTM F2180-19 (International): Defines methodologies for evaluating the dynamic fatigue performance of orthopedic cable systems under cyclic loading.

(3)ISO 12177-3: Additional compliance for tension-tension fatigue testing of surgical cables.

Product Advantages

(1)Multi-Axial Loading: Simultaneous tension/torsion control replicates in vivo stress patterns (5Hz fatigue cycles).

(2)High-Cycle Endurance: 1.000.000-cycle capacity with ±0.05% load accuracy at 5Hz operation.

(3)Biorelevant Simulation: 37±1°C saline bath with protein skimmer for in vitro corrosion testing.

(4)Smart Fixturing: Self-centering clamps accommodate cables (1.0–5.0 mm diameter) and cable systems.

(5)AI-Powered Analytics: Machine learning identifies fatigue initiation sites in real-time.

(6)Regulatory Compliance: Pre-loaded YY/T 0812/ASTM F2180 protocols with automated reporting.

Product Features

(1)Electromagnetic Servo Actuator: 10 kN tensile/5 Nm torsional capacity with programmable load ratios (R=0.1–10).

(2)Dynamic Load Control: 0.1–30 Hz frequency range with sine/square/random waveforms.

(3)Thermal-Mechanical Chamber: 37±0.5°C recirculating saline bath with anti-evaporation design.

(4)High-Resolution Imaging: Built-in 5MP camera system for fretting/corrosion analysis.

(5)Safety Suite: Emergency stop, overload clutches, and leak detection system.

(6)Modular Design: Dual-station configuration enables simultaneous specimen testing.

Accessories

(1)Cable Fixture Kit:

Self-centering clamps (1.0–5.0 mm cable compatibility)

Torsion adapters for multi-strand cables

(2)Thermal-Mechanical Bath:

20L capacity with recirculating pump

Corrosion-resistant titanium interior

(3)CableTest Pro Software:

Automated S-N curve generation and fatigue limit calculation

21 CFR Part 11-compliant audit trail with blockchain timestamping

Remote monitoring via iOS/Android app

(4)Operator Kit:

Calibrated micrometer set (0.01–1.00 mm)

Cable alignment jigs (ASTM F2180 compliant)

(5)Calibration Bundle:

NIST-traceable force/torque calibration weights

LVDT verification tool

(6)Safety Kit:

Leak detection system

Acoustic enclosure with 25 dB noise reduction

Technical Parameters

ParameterSpecification
Max. Tensile Load ±10.000 N (0.01 N resolution)
Max. Torsional Moment ±5 Nm (0.001 Nm resolution)
Frequency Range 0.1–30 Hz (0.01 Hz increments)
Load Ratio (R) 0.1–10 (adjustable)
Cable Diameter Range 1.0–5.0 mm (0.01 mm resolution)
Saline Bath Temperature 37±0.5°C (PT1000 sensor)
Data Sampling Rate 10 kHz (synchronized across 8 channels)
Power Requirements 220V/110V ±10%, 50/60Hz, 1.800W
Dimensions (W×D×H) 600 × 500 × 800 mm
Weight 90 kg (net) / 105 kg (with bath)
Noise Level <55 dB (A-weighted)

Send product request

To: Standard International Group (HK) Limited
Your E-mail:
Message text:


Send to other suppliers

Other supplier products

Zipper Fatigue Tester
Zipper Fatigue Tester Whats/App: +86 156 1874 6768 Web: standard-groups.com Product Introduction: The functional life of a zipper is often determined by its ability t...
Single Chip Impact Resistance Tester CE Certified
Single Chip Impact Resistance Tester CE Certified Get a quote: Whats/App: +86 156 1874 6768 Web: standard-groups.com Liquid crystal touch impact testing machine is mainly used for hard plastics ...
Water Leak Detector
Water Leak Detector Whats/App: +86 156 1874 6768 Web: standard-groups.com GB/T 21619-2008 Test Methods for Dangerous Goods Flammable Solids Emitting Flammable Gases ...
Global supplier guide wire friction tester equipment
Global supplier guide wire friction tester equipment Get a quote: Whats/App: +86 156 1874 6768 Web: standard-groups.com The Catheter Guidewire Friction Tester is designed to accurately measure the ...
ASTM ISO Vacuum Ball Disk Friction Tester Manufacturer
ASTM ISO Vacuum Ball Disk Friction Tester Manufacturer Get a quote: Whats/App: +86 156 1874 6768 Web: standard-groups.com A vacuum ball-on-disk friction tester is a device used to simulate friction a...
All supplier products

Same products

Stainless Steel Flux Cored Welding Wire E308T1-1 E308HT1-1 E308LT1-1 Gas Shielded FCAW Wire for 304 Stainless Steel Welding
Stainless Steel Flux Cored Welding Wire E308T1-1 E308HT1-1 E308LT1-1 Gas Shielded FCAW Wire for 304 Stainless Steel Welding Seller: 863048 Product Description stainless steel flux cored wire E308T1-1 E308HT1-1 E308LT1-1,FCAW stainless ...
E317LT1-1 Flux Cored Wire CO2 Stainless Steel 70% Flux Content 1.0/1.2/1.6mm Diameter OEM Customized 1200C Melting Point
E317LT1-1 Flux Cored Wire CO2 Stainless Steel 70% Flux Content 1.0/1.2/1.6mm Diameter OEM Customized 1200C Melting Point Seller: 863048 XUNZHUO STAINLESS STEEL CORED WELDING WIRE E317LT1-1 CLASSIFICATION: There are ones with diamet...
Mini Jewelry Laser Repair System – 60W to 400W Precision Welding
Mini Jewelry Laser Repair System – 60W to 400W Precision Welding Seller: Beijing JCZ Technology Co., Ltd The Mini Jewelry Laser Welding Machineis an advanced mini laser welding system engineered for pre...
Portable Backpack Laser Cleaning Machine – Lightweight, Efficient Rust & Paint Removal
Portable Backpack Laser Cleaning Machine – Lightweight, Efficient Rust & Paint Removal Seller: Beijing JCZ Technology Co., Ltd TheHCP-M SeriesBackpack Laser Cleaning Machinefeatures a compact pulsed fiber laser system, desig...
Suitcase Pulsed Laser Cleaning Machine | Ultra-Portable Handheld Fiber Laser Cleaner
Suitcase Pulsed Laser Cleaning Machine | Ultra-Portable Handheld Fiber Laser Cleaner Seller: Beijing JCZ Technology Co., Ltd The Suitcase Pulsed Laser Cleaning Machineis an ultra-portable, high-precision handheld fiber las...