Helmet Surface Friction Tester
Get a quote：
Whats/App: +86 181 0160 0864
Web: gellowen.co.uk
The Helmet Surface Friction Tester is a device used to evaluate the frictional properties of helmet surfaces. It measures how the helmet outer material interacts with different surfaces or materials, helping to assess slip resistance, abrasion, and overall surface durability under controlled conditions.
Application
The Helmet Surface Friction Tester evaluates the friction resistance of helmets. The helmet is pressed onto a movable fixture with a specified force. The fixture surface is covered with sandpaper of a standard-defined grit. The test helmet is then moved across the sandpaper at a controlled speed, allowing assessment of the helmet’s frictional performance.
Standards
Meets the requirements of ECE R22.05.
Technical Specifications
(1)The tester can perform friction tests on both protruding areas and flat surfaces of the helmet.
(2)Impact weight: 15 kg
(3)Free-fall height: 500 mm
(4)Load cell force: 400 N (40.8 kg)
(5)Release mechanism controlled by an electromagnet
(6)Sandpaper or shear blocks can be installed on the horizontal guide frame to perform linear friction with the helmet surface.
(7)Adjustable helmet mounting fixture
(8)Touchscreen control
Accessories
(1)Test Pads and Sliders: Standardized materials for simulating hand or surface contact.
(2)Helmet Holders/Fixtures: Secure helmets in a repeatable position for consistent testing.
(3)Force Sensors: Measure frictional forces accurately during testing.
(4)Data Acquisition System: Collects real-time friction data for analysis.
Test Procedures
Sample Preparation: Clean helmets and mount securely in the fixture.
Parameter Setup: Set normal load, sliding speed, and contact angle according to test requirements.
Friction Measurement: Move test pad or slider across the helmet surface while recording friction force.
Data Analysis: Evaluate surface friction coefficient, wear, or abrasion patterns.
在线联系供应商
Other supplier products
 |
SUGA GX75 7.5kW Xenon Weather Meter | Applicable Standards The GX75 meets stringent international standards, including: ISO 4892-2,ASTM G155,SAE J2527(automotive coatings) JIS K7... |
 |
Adhesion Strength Tester | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Adhesion Strength Tester is a precision instrument designed to evaluate peelin... |
 |
Photovoltaic Module Fracture Test Machine | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Photovoltaic Module Fracture Test Machine is designed to evaluate the impact r... |
 |
Thermal cycle wet freezing testing machine | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Thermal Cycle Wet Freezing Testing Machine is designed for comprehensive envir... |
 |
Total Hip Prosthesis Wear Testing Machine | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Total Hip Prosthesis Wear Testing Machine is a specialized laboratory device u... |
Same products
 |
HDPE高速水冷双壁波纹管生产线 | 卖方: Shandong HUASU Plastic Technology Co.,Ltd. | 机头模具采用双流道结构、氮化磨光处理机头，偏壁调整方便快捷，保证内外层壁厚均匀和稳定成型。 最新设计密闭压力水冷冷却结构，冷却充分，多点分布真空系统，效率更高，生产速度更快。 双层在线扩口功... |
 |
PanEVAP & MVR system | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat... |
 |
PanGAP wide gap welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel... |
 |
PanBloc welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac... |
 |
PanBox welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBox welded plate heat exchangerconsists of a laser welded plate pack with optimized corrugated... |
