ISO 5079 Single Fiber Strength Tester for Textile and Fiber Laboratories
Get a quote：
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Features
(1) Microcomputer-controlled system with online communication capability.
(2) High-precision, high-speed force measurement system for accurate data.
(3) Patented pneumatic clamps providing constant clamping force to prevent fiber damage or slippage.
(4) Low-noise and stable drive system with precision ball screws and stepper motors.
(5) Direct USB connection for data transfer, report generation, graphics, and database management.
(6) Large-screen LCD with Chinese interface and printer output for test reports and curves.
(7) Memory function for storing up to 300 test data sets.
(8) LED-lit operating area for better visibility and sample handling.
Parameters
| Parameter | Specification |
|---|---|
| Mode | Constant Rate of Elongation (CRE) |
| Clamping Method | Pneumatic clamping |
| Force Measurement Range | 0~200 cN |
| Resolution | 0.01 cN |
| Measurement Accuracy | ±0.5% |
| Gauge Length | 5~60 mm (digital setting) |
| Maximum Elongation | 130 mm |
| Tensile Speed | 2~100 mm/min (digital setting) |
| Test Modes | Constant speed tensile, Load at specified elongation, Elongation at specified load, Creep, Initial modulus |
| Data Output Methods | LCD display (Chinese menu), Printer output of test reports and tensile curves |
| Printer Type | 24-pin dot-matrix |
| Power Supply | AC 220V ±10%, 50 W |
| Dimensions (H×W×D) | 450×510×580 mm |
Accessories
Standard package includes: main unit, pneumatic clamp set, power cable, printer, and user manual.
Optional software for enhanced data analysis and export.
Calibration fiber standards for routine verification.
Test Procedures
(1) Prepare and condition fiber samples according to standard requirements.
(2) Mount a single fiber in the pneumatic clamps.
(3) Set gauge length, tensile speed, and test mode on the LCD interface.
(4) Start the test and monitor the force-elongation curve.
(5) View results on the screen and/or print test report with tensile curve.
(6) Repeat for additional samples, storing data in memory as needed.
在线联系供应商
Other supplier products
 |
Rattle tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Bell Rattle Toy Tester： Also known as: Sound-emitting toy tester Toy test template AB A... |
 |
Retroreflectometer analyzer | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards The system supports compliance with the following standards: GB/T 28468-2012 &n... |
 |
Automatic Cap Torque Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com A Bottle Cap Torque Tester is a specialized device used to measure the torque applied to bo... |
 |
Vibration and Crash Simulation Dummy for EV Batteries | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards The dummy complies with and supports testing according to the following standard... |
 |
Resistance Tester for Molten Metal Droplet (Splash) Impact Performance | Whats/App: +86 156 1874 6768 Web: standard-groups.com Performance and Standards: This resistance tester for molten metal droplet (splash) impact... |
Same products
 |
MMA-120 Handheld Arc Welder | 卖方: 871183 | The MMA-120 Handheld Arc Welder from ChuangLi Electronic Technology Co., Ltd. is designed for con... |
 |
SHX Series Circulating Fluidized Bed Steam Boiler | 卖方: Hebei Genjux Boiler Co.,Ltd | Capacity: 10-35 t/hWorking pressure: 1.25-2.5 MPaOperating temperature: 194-400 ℃Applicable to bi... |
 |
YQ(Y)W Series Oil/Gas Fired Vertical Thermal Oil Boiler | 卖方: Hebei Genjux Boiler Co.,Ltd | Capacity: 7000-29200 KWOperating pressure: 0.8-1.0 MPaOperating temperature: 320℃Operating mode: ... |
 |
DHL Series Coal-Fired Steam Boilers | 卖方: Hebei Genjux Boiler Co.,Ltd | Capacity: 35-75 t/hOperating pressure: 1.25-5.4 MPaOperating temperature: 194-485℃Applicable to b... |
 |
SZL Series Biomass Steam Boiler | 卖方: Hebei Genjux Boiler Co.,Ltd | Capacity: 6-35 t/hWorking pressure: 1.0-2.5 MPaOperating temperature: 184-350 ℃Applicable fuel bi... |
