Automotive Surface Durability Testing Machine for R&D and OEM Use | Factory Direct Manufacturer
Get a quote：
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Features
Full stainless steel test chamber with transparent doors for observation.
V-shaped bottom funnel for easy drainage and cleaning.
Removable brushes for quick replacement and reduced wear.
Inclined work platform minimizes brush abrasion during platform movement.
Customizable fixture holes on the platform for different sample sizes.
Two spray nozzles alternate with platform movement, ensuring uniform wash coverage.
Servo-driven work platform provides precise and repeatable test speeds.
Large capacity water tank with agitation ensures accurate mixing and consistent test results.
Water splash guards prevent damage to electrical components, enhancing safety.
Accessories
(1) Removable test brushes
(2) Spray nozzles (316 stainless steel)
(3) Sample platform fixtures
(4) Water mixing agitator
(5) Safety guards
Parameters
| Parameter | Specification |
|---|---|
| Test Chamber Material | #304 Stainless steel |
| Test Chamber Doors | 3 transparent sliding panels |
| Brush Type | Removable brushes for easy replacement |
| Work Platform | Inclined sides, customizable with threaded mounting holes |
| Spray Nozzles | 2 × 316 stainless steel, angle 65°, pressure 300 ±50 kPa, flow 2.2 ±0.2 L/min |
| Platform Drive | Servo motor, speed 5.0 ±0.2 m/min |
| Platform Safety | Dual limit proximity switches |
| Water Tank Capacity | 80 L with automatic refill, level control, and overflow protection |
| Water Mixing | Internal agitator for uniform solution |
| Safety Features | Water splash guard, water-electric separation |
Test Procedures
Installation of Wash Rotor
Attach the automotive wash brush rotor to the rotation shaft of the test bench using specialized bolts.
Gap Adjustment
Adjust the vertical gap between the rotor edge and test platform to 100 mm using adjustment tools.
Preparation of Test Solution
Add the cleaning agent to the circulating water tank and ensure thorough mixing using the built-in agitator.
Sample Placement
Place test parts or sample panels on the work platform.
Trial Run
Perform a preliminary run to ensure correct operation, brush contact, and spray distribution.
Formal Testing
Run the programmed wash cycle, applying controlled brush and water motion to evaluate coating scratch resistance.
Maintenance Information
Clean brushes and work platform after each test.
Inspect spray nozzles for clogging and clean or replace as needed.
Regularly check water tank level and agitator function.
Ensure platform drive system and safety switches are operational.
Keep test chamber dry and free from residue after tests to maintain accuracy.
在线联系供应商
Other supplier products
 |
Cone Calorimeter Heat Release Test Machine，ISO 5660，Benchtop Cone Calorimeter | Whats/App: +86 156 1874 6768 Web: standard-groups.com Products Heat release quantity is the core parametersto evalatethe fire behavior of materi... |
 |
Automotive Seat Structural Durability Test Bench | Cyclic Load Frame Strength Testing Equipment | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Features (1) Simulates vehicle collision and rapid deceleration conditions w... |
 |
Electric Cables Halogen Acid Gas Release Tester，Cable Halogen Acid Gas Release Test Machine | Whats/App: +86 156 1874 6768 Web: standard-groups.com Application This apparatus is widely used in laboratories and quality control departments ... |
 |
Advanced textile air permeability tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Application The Air Permeability Tester can evaluate a wide range of materials, including:... |
 |
Finger Tactile Sensor Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Researched and developed the idea of working with Shiseido in the creation of a fingertip s... |
Same products
 |
ER4047 Aluminum Mig Welding Wire | 卖方: 868776 | Hangzhou Kunli Welding Materials Co., Ltd. specializes in manufacturing reliable welding material... |
 |
ER4043 Silicon Aluminum Welding Wire | 卖方: 868776 | Hangzhou Kunli Welding Materials Co., Ltd. specializes in manufacturing high-quality welding mate... |
 |
Choosing the Right Equipment for Heavy-Duty Cleaning | 卖方: Taizhou Feike Mechanical Technology Co., Ltd. | FEIKE’s High Pressure Washer is designed for industrial cleaning, equipment maintenance, ve... |
 |
ER4043 Silicon Aluminum Welding Wire | 卖方: 868776 | Hangzhou Kunli Welding Materials Co., Ltd. offers ER4043 Silicon Aluminum Welding Wire for alumin... |
 |
HDPE高速水冷双壁波纹管生产线 | 卖方: Shandong HUASU Plastic Technology Co.,Ltd. | 机头模具采用双流道结构、氮化磨光处理机头，偏壁调整方便快捷，保证内外层壁厚均匀和稳定成型。 最新设计密闭压力水冷冷却结构，冷却充分，多点分布真空系统，效率更高，生产速度更快。 双层在线扩口功... |
