ISO 5660 Cone Calorimeter Fire Test Equipment Supplier Factory Direct
Get a quote：
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Features
Ignition System
10 kV spark igniter with fire-off safety system; position automatically detected via mechanical linkage.
Fully automated ignition, timing, gas control, and flame-off functions.
Exhaust System
Stainless-steel design including hood, pipes, diffusion plate, orifice flow meter, and axial-flow fan.
Long-life stainless-steel smoke collection cover, sampling needle, and exhaust fan.
Gas Sampling System
Ring sampler with 12 evenly distributed pores opposite airflow direction.
Three-stage 0.5 μm precision filtration with particle filter, CO₂ filter, and water trap.
Refrigerated cold trap with 0–5 °C temperature control.
Dust filter installed 685 mm from smoke-collecting hood.
Measuring System
Paramagnetic O₂ analyzer (0–25%), Servomex sensor with linear response.
Laser system for smoke-density measurement.
High-precision load cell for dynamic mass-loss monitoring.
PID temperature control with three thermocouples for cone-heater measurement.
User Operating System
LabVIEW-based professional control platform; intuitive and user-friendly.
PID temperature controller integrated with programmable control module.
PLC-based acquisition and airflow regulation; automatic sample ID management and database recordkeeping.
Technical Parameters
| Item | Value |
|---|---|
| Power supply | 208–230 V, 50/60 Hz, 50 A, single phase |
| Cone heater | 5000 W Inconel heater, 0–120 kW/m² |
| Sample size | 100 mm × 100 mm × ≤50 mm |
| Ignition | 10 kV automatic spark igniter |
| Temperature control | PID, 3× K-type thermocouples |
| Exhaust system | Stainless-steel hood, duct, orifice meter, axial fan |
| Gas sampling | 12-pore ring sampler, 0.5 µm triple filtration, 0–5 °C cold trap |
| Gas analyzers | O₂ paramagnetic (0–25%); CO₂ NDIR (0–10%); CO NDIR (0–1%) |
| Smoke measurement | He-Ne laser photometric system |
| Load measurement | Sartorius load cell, 0.01 g resolution |
| Data acquisition | 16-bit A/D, 4 scans/sec |
| Control system | LabVIEW + PLC, touchscreen control |
| Data output | Excel reports, customizable formats |
| System configuration | 19" rack modules; customizable full-system layout |
Accessories
• 10 kV electronic igniter
• Stainless-steel exhaust hood and ducting
• Orifice plate flow-measurement module
• Laser smoke-density measurement system
• Paramagnetic oxygen analyzer
• CO and CO₂ NDIR analyzers
• Load-cell weighing module
• Cold trap (0–5 °C)
• Gas-sampling ring with 12 sampling ports
• LabVIEW control software and PLC system
• Sample holder and retainer frame
• Data-acquisition platform and reporting package
Test Procedures
Place the specimen in the sample holder and input test parameters via the touchscreen control system.
The system automatically performs ignition, heat-flux adjustment, and timing.
Real-time measurement of HRR, oxygen consumption, smoke density, mass loss, CO/CO₂ concentration, and temperature.
Data acquisition system stores all curves and numerical results in the integrated database.
Export test report through automated Excel reporting functions.
After testing, allow system purge and remove combusted residue.
在线联系供应商
Other supplier products
 |
Lithium Battery Negative Electrode Expansion Screening System IEC 62133 | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards (1) RSS1100 – Internal standard for spring-loaded in-situ ex... |
 |
Coating Adhesion and Continuity Tester for Metal Tubes ISO ASTM Standard | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com The Aluminum Tube Internal Coating Continuity Tester is an important device s... |
 |
Expansion Tank Static Pressure Test Machine，High pressure expansion tank static tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Expansion Tank Static Pressure Test Machine is a specialized system designed to evaluat... |
 |
Helmet Projection and Surface Friction tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Purpose The Shear Force and Friction Tester for Helmet Surface Protrusions is mainly used ... |
 |
Textile far-infrared radiation temperature rise test instrument | Whats/App: +86 156 1874 6768 Web: standard-groups.com Applications Textile Far Infrared Radiation Temperature Rise Tester is used for various te... |
Same products
 |
不锈钢焊剂芯焊丝 E308T1-1 E308HT1-1 E308LT1-1 用于304不锈钢焊接的气保焊丝 | 卖方: 863048 | 产品描述 不锈钢药芯焊丝 E308T1-1 E308HT1-1 E308LT1-1，FCAW不锈钢焊丝，AWS A5.22药芯焊丝，304不锈钢焊接耗材，低碳不锈钢药芯焊丝，耐高温不锈钢焊丝，... |
 |
E317LT1-1 焊剂芯线 CO2 不锈钢焊剂含量70% 直径1.0/1.2/1.6mm OEM定制 1200℃熔点 | 卖方: 863048 | 迅卓不锈钢药心焊丝 E317LT1-1 分类： Сварочная проволока E317LT1-1 с флюсом, нержавеющая сталь, 70% содержан... |
 |
Mini Jewelry Laser Repair System – 60W to 400W Precision Welding | 卖方: Beijing JCZ Technology Co., Ltd | The Mini Jewelry Laser Welding Machineis an advanced mini laser welding system engineered for pre... |
 |
Portable Backpack Laser Cleaning Machine – Lightweight, Efficient Rust & Paint Removal | 卖方: Beijing JCZ Technology Co., Ltd | TheHCP-M SeriesBackpack Laser Cleaning Machinefeatures a compact pulsed fiber laser system, desig... |
 |
Suitcase Pulsed Laser Cleaning Machine | Ultra-Portable Handheld Fiber Laser Cleaner | 卖方: Beijing JCZ Technology Co., Ltd | The Suitcase Pulsed Laser Cleaning Machineis an ultra-portable, high-precision handheld fiber las... |
