Professional High Temperature Oxygen Index Tester Factory
Get a quote：
Whats/App: +86 156 1874 6768
Web: standard-groups.com
E-mail：info@standard-groups。com
Key Components
Heat-Resistant Cylinder: Borosilicate glass (inner dia. >75mm, height >550mm).
Stainless Steel Beads: Enhances gas flow uniformity (4mm dia., 80–100mm height).
Pilot Burner: 2mm inner dia., 400mm length for precise ignition.
Gas Control: Automated oxygen/nitrogen mixing with flow rate 12.1L/min.
Parameters
| Parameter | Specification |
|---|---|
| Control Mode | Full-color touchscreen (CN/EN) |
| Oxygen Range | 0–100% (±0.5% accuracy) |
| Temperature Range | Room temp–200°C |
| Heating Power | 1000W |
| Test Cylinder Dimensions | Inner dia. >75mm, Height >550mm |
| Gas Inlet | 7mm (O₂/N₂) |
| Power Supply | 220V, 50Hz |
| Dimensions | 700mm (L) × 430mm (W) × 770mm (H) |
| Weight | 55kg |
Test Procedures
First: Prepare the accessories and test sample;
Place the test sample in the fixture;
Use a long hook to insert the fixture with the sample into the heat-resistant glass tube;
Turn on the instrument switch and access the LCD screen interface;
Purge with oxygen and nitrogen for 30 seconds each;
Set the oxygen concentration parameter;
Set the heating temperature;
Stop heating when the temperature inside the test tube reaches a certain level;
Ignite the sample with an ignition gun;
Start the timer;
Stop the timer when the flame reaches a certain mark;
Stop the gas supply and heating;
Save and view the data;
Remove the test sample and turn off the instrument to end the test.
在线联系供应商
Other supplier products
 |
Plastic Smoke Density Tester F313 | Whats/App: +86 156 1874 6768 Web: standard-groups.com The F313 Plastic Smoke Density Tester is a precision instrument designed to measure the spe... |
 |
Environmental Stress Cracking Resistance Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com This instrument is a testing device recommended according to standard requirements. It is a... |
 |
Full Face Helmet Flame Resistance Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Full Face Helmet Flame Resistance TesterMedical mask fire test machine is to determine the ... |
 |
Adhesion Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com The adhesion tester is a device specifically used to detect the strength of the adhesion of... |
 |
Walk-in High Temperature Aging Chamber Factory | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards GB50052-95 Code for Design of Power Supply and Distribution GB500... |
Same products
 |
HDPE高速水冷双壁波纹管生产线 | 卖方: Shandong HUASU Plastic Technology Co.,Ltd. | 机头模具采用双流道结构、氮化磨光处理机头，偏壁调整方便快捷，保证内外层壁厚均匀和稳定成型。 最新设计密闭压力水冷冷却结构，冷却充分，多点分布真空系统，效率更高，生产速度更快。 双层在线扩口功... |
 |
PanEVAP & MVR system | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat... |
 |
PanGAP wide gap welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel... |
 |
PanBloc welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac... |
 |
PanBox welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBox welded plate heat exchangerconsists of a laser welded plate pack with optimized corrugated... |
