Professional High Temperature Oxygen Index Tester Factory
Get a quote：
Whats/App: +86 156 1874 6768
Web: standard-groups.com
E-mail：info@standard-groups。com
Key Components
Heat-Resistant Cylinder: Borosilicate glass (inner dia. >75mm, height >550mm).
Stainless Steel Beads: Enhances gas flow uniformity (4mm dia., 80–100mm height).
Pilot Burner: 2mm inner dia., 400mm length for precise ignition.
Gas Control: Automated oxygen/nitrogen mixing with flow rate 12.1L/min.
Parameters
| Parameter | Specification |
|---|---|
| Control Mode | Full-color touchscreen (CN/EN) |
| Oxygen Range | 0–100% (±0.5% accuracy) |
| Temperature Range | Room temp–200°C |
| Heating Power | 1000W |
| Test Cylinder Dimensions | Inner dia. >75mm, Height >550mm |
| Gas Inlet | 7mm (O₂/N₂) |
| Power Supply | 220V, 50Hz |
| Dimensions | 700mm (L) × 430mm (W) × 770mm (H) |
| Weight | 55kg |
Test Procedures
First: Prepare the accessories and test sample;
Place the test sample in the fixture;
Use a long hook to insert the fixture with the sample into the heat-resistant glass tube;
Turn on the instrument switch and access the LCD screen interface;
Purge with oxygen and nitrogen for 30 seconds each;
Set the oxygen concentration parameter;
Set the heating temperature;
Stop heating when the temperature inside the test tube reaches a certain level;
Ignite the sample with an ignition gun;
Start the timer;
Stop the timer when the flame reaches a certain mark;
Stop the gas supply and heating;
Save and view the data;
Remove the test sample and turn off the instrument to end the test.
Send product request
Other supplier products
 |
ASTM E84 Building Materials Flame Spread Test Apparatus，Steiner Tunnel Test Furnace | Whats/App: +86 156 1874 6768 Web: standard-groups.com The ASTM E84 Building Materials Flame Spread Test Apparatus is designed to evaluate the com... |
 |
Rolling load tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standard EN 1569: Determines rolling load resistance of synthetic sports surfaces (e.g., P... |
 |
Wide-Load Friction and Wear Test Equipment | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards The system supports test methods commonly referenced in international tribology ... |
 |
5 position seatbelt abrasion tester supplier | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards (1) ASTM D6770 – Webbing abrasion resistance test (2) FED STD 191 –... |
 |
Filter Media Tester G505，ISO 11057 air filtration media performance tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Filter Media Dynamic Filtration Performance Tester is primarily used to assess the filt... |
Same products
 |
MMA-120 Handheld Arc Welder | Seller: 871183 | The MMA-120 Handheld Arc Welder from ChuangLi Electronic Technology Co., Ltd. is designed for con... |
 |
SHX Series Circulating Fluidized Bed Steam Boiler | Seller: Hebei Genjux Boiler Co.,Ltd | Capacity: 10-35 t/hWorking pressure: 1.25-2.5 MPaOperating temperature: 194-400 ℃Applicable to bi... |
 |
YQ(Y)W Series Oil/Gas Fired Vertical Thermal Oil Boiler | Seller: Hebei Genjux Boiler Co.,Ltd | Capacity: 7000-29200 KWOperating pressure: 0.8-1.0 MPaOperating temperature: 320℃Operating mode: ... |
 |
DHL Series Coal-Fired Steam Boilers | Seller: Hebei Genjux Boiler Co.,Ltd | Capacity: 35-75 t/hOperating pressure: 1.25-5.4 MPaOperating temperature: 194-485℃Applicable to b... |
 |
SZL Series Biomass Steam Boiler | Seller: Hebei Genjux Boiler Co.,Ltd | Capacity: 6-35 t/hWorking pressure: 1.0-2.5 MPaOperating temperature: 184-350 ℃Applicable fuel bi... |
