ASTM D6830 Aerosol Sensor Test System
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Standards
This system complies with and supports:
(1) GB/T 14295-2019 – Air filters.
(2) GB/T 13554-2020 – High-efficiency air filters.
(3) GB/T 6165-2021 – HEPA filter performance: efficiency and resistance.
(4) ISO 11057 – Filter media performance testing.
(5) EN 1822-4 – HEPA filter testing.
(6) ISO 29463-4 – High-efficiency air filter performance.
(7) ASTM D6830 – Evaluation standard for air filters.
Parameters
| Parameter | Unit | Value |
|---|---|---|
| Test Flow Rate | m³/h | 0.8 – 450 |
| Test Concentration | µg/m³ | 5 – 1000 (at 100 m³/h) |
| Test Medium Differential Pressure | Pa | ≤ 10000 (for 450 m³/h) |
| Gas/Air Supply | – | Compressed air, max. 10 bar |
| Power Supply | – | 400 VAC, 25 A |
| Particle Measurement | – | Customer-specified (e.g., LAP 323) |
| Sensors | – | Differential pressure, temperature, relative humidity, absolute pressure |
| Duct Diameter | mm | 150 (internal) |
| System Dimensions (W × H × D) | mm | 2300 × 1500 × 900 |
| Weight | kg | approx. 400 |
Features
Stable and Adjustable Aerosol Generation: Provides consistent aerosol concentrations across variable flow rates.
Solid and Liquid Aerosol Capability: Supports both types of aerosols to meet diverse test requirements.
Customer Customization: Adapts to different sensors, sample holders, and measurement configurations.
Broad Application Range: Suitable for PM and PN sensor calibration, testing, and development.
Fully Integrated System: Seamless integration with external equipment for optimal performance.
User-Friendly Software Control: Win-based interface for simplified operation, data acquisition, and result analysis.
Accessories
| Accessory | Quantity |
|---|---|
| Aerosol Generator | 1 |
| Laser Aerosol Particle Spectrometer | 1 |
| Sample Holder | As required |
| Customer-Specified Sensors/Equipment | As required |
Test Principle
Aerosol Generation: Aerosol is generated via a dedicated generator and distributed evenly in the measurement duct.
Sensor Integration and Testing: Customer PM sensors are integrated and tested, with reference measurements using laser aerosol spectrometers.
Aerosol Concentration Measurement: Upstream and downstream particle concentrations are monitored in real time.
Multi-Segment Measurement: Optional dual-section configuration supports different flow ranges for comprehensive sensor evaluation.
Operation Instructions
System Startup:
- Check power, air supply, and aerosol generator.
- Configure test parameters including flow rate, aerosol type, and sensor setup.
Testing Process:
- Install sensors into sample holders.
- Start the test; the system automatically generates aerosol, measures particle concentrations, and evaluates sensor performance.
Data Recording and Reporting:
- Win software records all test data and generates detailed reports for quality control and further analysis.
Experimental Procedure
Preparation Stage:
- Configure all devices, including aerosol generator, sensors, and flow measurement instruments.
- Ensure ducts and sample holders are correctly installed.
Testing Stage:
- Start the system; automated measurement of particle concentrations, sensor calibration, and performance evaluation occurs.
Result Analysis and Reporting:
- Software generates reports including sensor efficiency, differential pressure response, and other key parameters.
Maintenance Information
Regularly check aerosol generators, sensors, and measurement devices.
Ensure calibration of flow and particle measurement instruments.
Keep ducts and sample holders clean to maintain consistent results.
在线联系供应商
Other supplier products
 |
Full Notch Creep Tester | This testing machine is used to test the environmental stress cracking performance of plastic materials. The equipment features touchscreen operati... |
 |
Solid Split-Type Weighted Dummy | Whats/App: +86 156 1874 6768 Web: standard-groups.com Applications Solid Split-Type Weighted Dummies are widely used by automotive manufacturers... |
 |
Light Fastness Test Instrument | Features and Benefits 1.The lightfastness test instrumentusexenon arc lamp as a radiation source, the visible light range emitted is 380nm-750nm, ... |
 |
Reciprocating Friction and Wear Testing Machine | Applicable Standards ASTM Standards: Formulated by the American Society for Testing and Materials (ASTM), standards such as ASTM D6079 are used to... |
 |
In-situ expansion analysis system | The In-situ Expansion Analysis System is designed for high-precision measurement of dimensional and volumetric changes in electrochemical cells and... |
Same products
 |
G506 Filter Performance Tester | 卖方: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards ASTM F2100:Standard Specificat... |
 |
Automated Filter Integrity Tester | 卖方: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com Testing Standards ASTM F838 – Memb... |
 |
High Efficiency Oil Water Separation Tester | 卖方: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards ISO/TS 16332-2006 – Meth... |
 |
DIN 51524 hydraulic oil analyzer | 卖方: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards You can operate this unit in c... |
 |
Cartridge filter pore size distribution tester | 卖方: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards ISO 2942:2004 — Hydrauli... |
