浮动球阀

This series floating ball valve is applicable in the pipe lines of Class150～Class600、PN16～PN100、JIS10K～JIS20K, it is used to cut of connect the medium, different materials are preferable to suit water, natural gas, petroleum, and so on. It features:

Ball, stem and handle are one assembly unit. The stem head is a flat square structure and the valve is easy to be seen either in the opened or close position from the place the handle is in. when the handle or the flat square of the stem head is parallel with the pipeline, the valve is in the fully opened or close opened position. While in the fully closed one when vertical to the pipeline.
To prevent maloperation of the valve, a hanging lock can be used to lock it when in the fully opened or closed position, which is very important especially for the valve mounted outside or not allowed to be opened or closed by the technological flow.
The stem may be pushed out by the pressure in the middle cavity of the body when the medium goes through the valve. To prevent this, a fly-resisting structure is made on the lower part of the stem (fig 1). In this way, even if the packing and /or thrust bearing are burnt out in a fire or damaged by other causes, the medium’s pressure inside of the body will have both stem flange and upper sealing face of body tightly contacted so as to prevent a lot of medium form leaking form the damaged packing place.
Electrostatic-proof device and fire-fighting structure Both electrostatic-proof device and fire-fighting structure and fir-fighting structure are designed. Once the seat ring is burnt out in case of a fire. The ball would be directly contacted with the metal face of the body so as to prevent a lot of the body so as to prevent a lot of medium from leaking from leaking from the burnt place of the seat ring.
Unique sealing structure of seat ring The dual-line seal and the self-combustible pressure dischargeable seat ring designed by way of combining the years ball valve manufacturing experience and the foreign advanced know-how can ensure the full seal under a high or low pressure and a vacuum state.
Full or reduced diameter The valve nominal diameter is identical to the inner diameter of the pipeline (which can be reduced one if so required by users ) for the sake of cleaning (fig 6).

Other supplier products

	DIN 蝶阀
	全焊接球阀	设计标准 API 6D 端面 API 6D 连接法兰 ANSI B16.5 检验测试标准 API 6D API598
	三通球阀	三通球阀 此三通球阀有着独特的结构和设计，可广泛的应用于自动控制系统和工控，如冶金，矿山，石油，化工，电力，轻工，船舶等，并可配备气动控制系统，适用于混合或分离不同物质如液体，气体等，我们采用动态平衡的四面阀座密封结构，这种结构可保证良好的密封，流道的阻力减弱，使流动更光滑， 这种阀门根据...
	上装式球阀	上装式球阀又称顶装式球阀，具有以下优点： 1. 上装式球阀DN100以下规格为双斜面设计，在弹簧的作用下，该阀能自补偿密封，保证其在中、低压时均有良好的密封性能，　使用寿命长。DN100以上采用固定球结构，保证使用性能。　 　　 2. 只在阀杆和阀盖接触的地方放置填料，减轻了阀门的关...
	两片式球阀	工作压力: 1000PSI 工作介质:水，油，气体 和其它腐蚀性流体. 温度范围:-20~232°C~350°C 螺纹类型:G•NPT.BSPT.BSP.DIN259/2999

供应产品

Same products

	Hot Melt Adhesive for Labels	卖方: Foshan Rurga New Material Technology Co. ,Ltd	Hot Melt Adhesive for Labels Key Performance Indicators Adhesion & Peel Strength: Provi...
	danfoss hydraulic motor supplier	卖方: Baoding Dingsen Hydraulic Equipment Sales Co., LTD	danfoss hydraulic motor supplier Danfoss Hydraulic Motor – Overview A Danfoss hydra...
	rexroth hydraulic motor	卖方: Baoding Dingsen Hydraulic Equipment Sales Co., LTD	rexroth hydraulic motor Rexroth Hydraulic Motor – Overview A Rexroth hydraulic moto...
	parker hydraulic pump supplier	卖方: Baoding Dingsen Hydraulic Equipment Sales Co., LTD	parker hydraulic pump supplier Parker Hydraulic Pump Supplier – Simple Introduction ...
	eaton hydraulic pump remanufactured manufacturer	卖方: Baoding Dingsen Hydraulic Equipment Sales Co., LTD	eaton hydraulic pump remanufactured manufacturer Remanufactured Eaton Hydraulic Pumps &ndash...