1045/1020 steel Rolling bearings withdrawal sleeve,inch/metric Withdrawal Sleeve,Conical withdrawal sleeve, AH3/AH240 Withdrawal Sleeve
1045/1020 steel Rolling bearings withdrawal sleeve,inch/metric Withdrawal Sleeve,Conical withdrawal sleeve, AH3/AH240 Withdrawal Sleeve
Withdrawal(Extraction) sleeves can be used to mount bearings with a tapered bore on cylindrical seats of stepped shafts. The sleeve is pressed into the bore of the bearing that abuts a shaft shoulder or similar fixed component. The sleeve is located on the shaft by a nut or an end plate. Lock nuts or endplates are not supplied with the withdrawal sleeves.
To secure the bearing to the shaft, press the withdrawal sleeve into the bearing bore. To do this, particularly where larger bearings are concerned, considerable force is required to overcome the friction between the mating surfaces of the bearing and sleeve and of the sleeve and shaft. Mounting and dismounting of bearings on withdrawal sleeves can be facilitated considerably by using a hydraulic nut .Basic design
Withdrawal sleeves are slotted and have an external taper of 1:12 except for those in the AH 240 and AH 241 series which have an external taper of 1:30 and are intended for use with wide bearings in the 40 and 41 Dimension Series.
The nuts required for dismounting the withdrawal sleeve are not supplied with the sleeve and must be ordered separately.
Materials
The materials using in withdrawal sleeves are carbon steel with a tensile strength at least 430N /mm2.
Dimensions
The dimensions of withdrawal sleeves are in accordance with ISO 2982-1:1995.
Tolerances
The bore diameter of withdrawal sleeves is to tolerance JS9, the width to h13.
Thread
Withdrawal sleeves up to size 38 have metric threads with 6g tolerances according to ISO 965-3:1998. Larger withdrawal sleeves have metric trapezoidal threads with 7e tolerance according to ISO 2903:1993.
If standard nuts are not used, the threads of nuts for withdrawal sleeves up to size 38 should correspond to tolerance 5H according to ISO 965-3:1998. The threads of nuts for larger withdrawal sleeves should correspond to tolerance 7H according to ISO 2903:1993.
在线联系供应商
Other supplier products
 |
1045/1020 steel diameter 200mm~1000mm Conical sleeve,Z3 Heave tight coupling Sleeve | 1045/1020 steel diameter 200mm~1000mm Conical sleeve,Z3 Heave tight coupling Sleeve The swelling link sets are widely used in heavy load, the mecha... |
 |
1045/1020 steel diameter 200mm~1000mm Conical sleeve,Z9 Heave tight coupling Sleeve | 1045/1020 steel diameter 200mm~1000mm Conical sleeve,Z9 Heave tight coupling Sleeve The swelling link sets are widely used in heavy load, the mecha... |
|
|
1045/1020 steel Rolling bearings withdrawal sleeve,inch/metric Withdrawal Sleeve,Conical withdrawal sleeve, AH3/AH240 Withdrawal Sleeve | 1045/1020 steel Rolling bearings withdrawal sleeve,inch/metric Withdrawal Sleeve,Conical withdrawal sleeve, AH3/AH240 Withdrawal Sleeve Withdrawal(... |
 |
1045 /1020 steel bearings Adapter Sleeve,surface treatment,inch/metric sleeve,Conical sleeve,H30/H31 Adapter Sleeve | 1045 /1020 steel bearings Adapter Sleeve,surface treatment,inch/metric sleeve,Conical sleeve,H30/H31 Adapter Sleeve Adapter sleeves are using for l... |
 |
1045/1020 steel diameter 200mm~1000mm Conical sleeve,Z8 Heave tight coupling Sleeve | 1045/1020 steel diameter 200mm~1000mm Conical sleeve,Z8 Heave tight coupling Sleeve The swelling link sets are widely used in heavy load, the mecha... |
Same products
 |
多级串联精密滚柱轴承T-3092-6A有货 | 卖方: JinHang Precision Bearing Co.,LTD | 轴承出厂编号：T-3092-6A项目代码：T-3092-6A结构：基本型串联推力圆柱滚子轴承原产地：中国洛阳润滑：油润滑外形公制尺寸：30*92*294mm它们在橡胶和塑料行业的平行双螺杆挤出机... |
 |
食品螺杆挤出机多级串联推力轴承T-2872-6A | 卖方: JinHang Precision Bearing Co.,LTD | 轴承出厂编号：T-2872-6A项目代码：T-2872-6A原产地：中国洛阳润滑：油润滑外形公制尺寸：29*75*165mm外径D:75mm内径d:29mm总高度：165毫米它们在橡胶和塑料行业... |
 |
薄膜螺杆挤出机齿轮箱串联滚柱轴承T-25105 8A | 卖方: JinHang Precision Bearing Co.,LTD | 轴承出厂编号：T-25105 8A项目代码：T-25105.8A原产地：中国洛阳润滑：油润滑外形尺寸：25*105*255mm外径D:105mm内径d:25mm总高度：395mm它们在橡胶和塑料... |
 |
PVC螺杆挤出设备齿轮箱滚柱轴承T-25105 8A | 卖方: JinHang Precision Bearing Co.,LTD | 应用：橡胶和塑料工业中单螺杆和双螺杆挤出机的变速箱。深孔钻削设备摩擦焊机。轴承出厂编号：T-25105 8A项目代码：T-25105.8A原产地：中国洛阳润滑：油润滑外形尺寸：25*105*25... |
 |
食品挤出机多级串联推力轴承T-25105.6A工厂现货 | 卖方: JinHang Precision Bearing Co.,LTD | 轴承出厂编号：T-25105.6A项目代码：T-25105.6A原产地：中国洛阳润滑：油润滑外形尺寸：25*105*255mm外径D:105mm内径d:25mm总高度：255毫米轴承轴直径：0.... |
