双螺杆挤出机齿轮箱使用串联滚子轴承 M4CT2866A 尺寸 28*66*107.5mm
串联推力轴承M4CT2866A可以在有限的空间内承受重载,并在轴向方向上提供牢固的支撑,并且摩擦力低,使用寿命长。 此外,这些轴承通过油润滑移动。 此外,这些串联推力轴承主要用于橡胶和塑料行业的单螺杆和双螺杆挤出机的齿轮箱。 串联轴承主要装有标准的轴向圆柱滚子和轴承组件。 推力圆柱滚子轴承M4CT2866A,尺寸28*66*107.5mm,内径:28mm,外径:66mm,总高:107.5mm
串联轴承旧代号 基本尺寸单位(mm) 基本额定载荷
单位(千牛)
内径 外径 高度 Cr Cor
M4CT2866 A 28 66 107.5 320 1000
在线联系供应商
Other supplier products
Cable strander high speed bearing Z-547406.ZL | Bearing factory model:Z-547406.ZL China Bearing old type: 547406 P5 Bearing structure:single row cylindrical roller bearing Precision grade:P5 P6 g... | |
挤出机轴承多级圆柱滚子推力轴承M4CT40110 40*110*164mm | 串联推力轴承 M4CT40110 设计用于水平轴应用(挤出机齿轮驱动),必须施加足够的推力载荷以防止滚子滑动。 通常,所需的最小载荷表示为轴承额定动载荷 (C) 与施加载荷 (P) 的比率。 必须避免 C/P > 12 的负载,并且应避免 C/P 介于 8 和 12 之间的负载。 M4C... | |
串联轴承塑料挤出机轴承 M4CT527 5x27x52mm | The thrust cylindrical roller bearing M4CT527 with size 5x27x52mm, the inner diameter:5 mm, the outer diameter:27mm, the total height:52mm Tand... | |
立式加工中心采用XR766051 457.2x609.6x63.5mm交叉滚子轴承 | 交叉圆锥滚子轴承XR766051 457.2x609.6x63.5mm 包含两组滚道和滚子以高角度组合在一起,交替滚子面向相反方向。 横截面的高度与单列轴承相似,以节省空间和轴承座材料。陡角、锥形几何形状导致总有效轴承分布远大于轴承本身的宽度。交叉滚子轴承代号 XR766051相当于SKF 6... | |
深孔钻设备用推力滚子轴承M6CT527 5x27x78mm | 推力圆柱滚子轴承M6CT527,尺寸5x27x78mm,内径:5mm,外径:27mm,总高:78mm串联轴承 基本尺寸单位(mm) 基本额定载荷单位(千牛)内径 外径 高度 Cr CorM6CT527 5 27 78 56 157 |
Same products
Tubular Stranding machine use bearing 527247 | 卖方: JinHang Precision Bearing Co.,LTD | The cylindrical roller bearings Z527247ZL have high rigidity, high radial load carrying capacity.... | |
Bearing Z-527462.ZL For Control cable tubular strander machine | 卖方: JinHang Precision Bearing Co.,LTD | Single row cylindrical roller bearings Z-527462.ZL with cage are units comprising solid inner and... | |
High speed rotor bearing Z-537024.ZL for strander machine | 卖方: JinHang Precision Bearing Co.,LTD | The bearings Z-537024.ZL can be lubricated from the end faces using grease or oil.The bearing 53... | |
Rotating bearing Stainless steel wire stranding machine 527461 | 卖方: JinHang Precision Bearing Co.,LTD | Single row cylindrical roller bearings Z-527461.ZL with cage can be used at operating temperature... | |
Non-standard tubular strander bearing Z-527460.ZL | 卖方: JinHang Precision Bearing Co.,LTD | Speical roller bearing 527460 have a lubrication groove and three lubrication holes in the outer ... |