ANSI Carbon Steel Globe Valve
Tilting Disc Check Valves consist of a cylindrical housing, with a pivoted circular disc. The pivots are located just above the center of the disc, and offset from the plane of the body seat. This design gives a bell-crank action to the disc. The seat is of circular bevel type and the disc drops in or out of contact without rubbing or sliding.
Futures:
1, Reduced maintenance is assured because the disc is the only moving part and is designed to minimize flutter in the closed position, thus reducing wear on the pivot pin, disc, and seat.
2, Loss of head is minimized by the balanced disc and its "aerofoil" design. Streamlined body without pockets contributes to straight-through flow.
3, Short distance of travel, combined with a balanced disc allows rapid closure while minimizing slamming.
4, Drop tight seating is accomplished over the full pressure range because a slight clearance at the pivot pin assures complete seating between the disc ring and body ring.
Bolted Cap, Swing Disc
Main Parameter Specification
Design Manufacture: API 6D,BS1868
Face to Face Dimension: ANSI B16.10
Connection End: ASME B16.5, ASME B 16.47
Test and Inspection: API 598, API6D
Size: 2”~24”
Class: 150LB~600LB
Pressure Seal, Swing Disc
Main Parameter Specification
Design Manufacture: ANSI B16.34
Face to Face Dimension: ANSI B16.10
Connection End: ASME B16.5, ASME B 16.47
BW Connection End: ASME B16.25
Test and Inspection: API 598, API6D
Size: 2”~18”
Class: 900LB~2500LB
在线联系供应商
Other supplier products
 |
ANSI Carbon Steel Globe Valve | Description: Y-Pattern Globe valves are available in three bonnet designs. 1) Bolted Bonnet, with male-female joint, spiral wound gasket, made in F... |
 |
Double Spring Type Safety Valve | Features 1. Two or Three-piece body design2. Double block and bleed or automatic pressure release in body chamber3. Trunnion supported design red... |
 |
ANSI Carbon Steel Globe Valve | Description: The angle body globe valve design is a simple modification of the basic globe valve. A particular advantage of the angle body design i... |
 |
Double Spring Type Safety Valve | Spring Loaded Safety Valve, a valve-closing body, having at least one valve-closing-body joint, in which at least one first closing-body lever is... |
 |
ANSI Carbon Steel Globe Valve | Size: 1/2inch -6 inch Temperature of medium: Depends on body material Medium: Water, Oil, Gas Material: A105, A182 F316, CF8M, WCB etc Pressure: 15... |
Same products
 |
200WOG Thread Globe Valve | 卖方: Wenzhou Chenyu Valve Co., Ltd | 200WOG Thread Globe Valveis a type of valve designed to regulate or isolate the flow of liquids o... |
 |
Forged Steel Gate Valve | 卖方: Wenzhou Chenyu Valve Co., Ltd | Forged Steel Gate Valveis a robust and high-performance type ofGate Valveprimarily used for relia... |
 |
RV-01A High-Pressure Aluminium for Aquaculture Environmental Protection OEM | 卖方: Greentech International (Zhangqiu) Co., Ltd | RV-01A pressure relief valveAir Blower pressure relief valve is installed on the inlet &outle... |
 |
Pressure Relief Valve/Series Relief Valve | 卖方: Greentech International (Zhangqiu) Co., Ltd | Application:1.Usedinringblowerandsuitablebothpressure/vacuumuse.2.Staticpressuresettingeasilyadju... |
 |
right valves | 卖方: Yuanda Valve Group Co.,Ltd. | right valves Selecting the is essential for the efficiency, safety, and reliability of intel... |
