API Tilting Disc Swing Type Check Valve
Tilting Disc Check Valves consist of a cylindrical housing, with a pivoted circular disc. The pivots are located just above the center of the disc, and offset from the plane of the body seat. This design gives a bell-crank action to the disc. The seat is of circular bevel type and the disc drops in or out of contact without rubbing or sliding.
Futures:
1, Reduced maintenance is assured because the disc is the only moving part and is designed to minimize flutter in the closed position, thus reducing wear on the pivot pin, disc, and seat.
2, Loss of head is minimized by the balanced disc and its "aerofoil" design. Streamlined body without pockets contributes to straight-through flow.
3, Short distance of travel, combined with a balanced disc allows rapid closure while minimizing slamming.
4, Drop tight seating is accomplished over the full pressure range because a slight clearance at the pivot pin assures complete seating between the disc ring and body ring.
Bolted Cap, Swing Disc
Main Parameter Specification
Design Manufacture: API 6D,BS1868
Face to Face Dimension: ANSI B16.10
Connection End: ASME B16.5, ASME B 16.47
Test and Inspection: API 598, API6D
Size: 2”~24”
Class: 150LB~600LB
Pressure Seal, Swing Disc
Main Parameter Specification
Design Manufacture: ANSI B16.34
Face to Face Dimension: ANSI B16.10
Connection End: ASME B16.5, ASME B 16.47
BW Connection End: ASME B16.25
Test and Inspection: API 598, API6D
Size: 2”~18”
Class: 900LB~2500LB
Send product request
Other supplier products
Back-flow Safety Valve | This valve is mounted on the liquidoid refluence pipeline of the pan pump's outlet of the liquefied petroleum gas station.when front pump pressure... | |
Carbon Steel Trunnion Mounted Ball Valve | Features 1. Two or Three-piece body design2. Double block and bleed or automatic pressure release in body chamber3. Trunnion supported design red... | |
Carbon Steel Y-Pattern Globe Valve | Description: Y-Pattern Globe valves are available in three bonnet designs. 1) Bolted Bonnet, with male-female joint, spiral wound gasket, made in F... | |
API 6D Stainless Steel Three Way Ball Valve | The three way ball valves have especially been designed to permit a 90°connection between two pipes of same bore. The special construction of... | |
High Pressure Seal Globe Valve | Description: High pressure sealed globe valve is applicable to the cutting and connection of pipelines medium that are used in various industries s... |
Same products
Клапан | Seller: RongTengXinNuo(Tianjin) International Trade Co.,Ltd | Клапан | |
Class 300 Valve | Seller: GangYe Group Co.,Ltd. | Class 300 valves have a pressure rating of 300 pounds per square inch (psi) or 20.7 bar, allowing... | |
Class 3000 Industrial Valve | Seller: GangYe Group Co.,Ltd. | Wafer Body, Full Port Design, Flanged End Class 3000 Ball Valve. A ball valve class 3000pressure-... | |
Class 2500 Industrial Valve | Seller: GangYe Group Co.,Ltd. | Class 2500 valves can be used for both on-off and throttling applications. The specific valve typ... | |
Class 150 Valve | Seller: GangYe Group Co.,Ltd. | globe valve class 150is a pressure rating designation defined by standards organizations, such as... |