High Performance Valve Seat Display
High Performance Valve SeatDisplay
tungsten carbide valve seats
Valve Seat: The detachable surface parts in valve are used to support the valve spool in the fully closed position and constitute a sealed part. Generally, valve seat diameter is the maximum flow diameter of the valve.
PRODUCT PARAMETERS
Valve Seat: The detachable surface parts in valve are used to support the valve spool in the fully closed position and constitute a sealed part. Generally, valve seat diameter is the maximum flow diameter of the valve. Elastic sealing material and small actuator's thrust force is used to obtain tight seal of air bubble, compression valve seat's sealing stress elastically deforms the material and squeezes it into the rough surface of the matching metal part to block all leakage paths. The permeability of material is a basis for small amount of leakage for fluid. The seal must be carefully fixed to prevent cracking and air leakage due to differential pressure. Bonding soft valve seat to metal part is one way, but it cannot completely solve the problem because the bond breaks and fails when exposed to thermal shock. A sufficiently large pressure drop will destroy the bonding material. Ultrasonic spraying equipment is used to optimize thermal spraying technologyprocess so that the denseness of coating can meet the gas sealing requirements under up to 140MPa, the porosity of coating <1%, the bonding strength exceeds 75MPa, the hardness can reach HV1500 and the hardness uniformity fluctuates by no more than HV100; the product surface after coating can reach mirror surface, with roughness less than Ra0.1, and flatness no more than 2 bands, which can effectively reduce the coefficient of friction between Valve Gate and valve seat and improve its service life.
在线联系供应商
Other supplier products
 |
GATES OF GATE VALVE | GATES OF GATE VALVE Valve Gate Valve Gate: The core parts of flat gate valves used in the petrochemical industry require high pressure, wear resist... |
 |
Introduction to Hvof Tungsten Carbide Coating | Introduction to Hvof Tungsten Carbide Coating HVOF COATING Cemented Carbide Valve Seat Valve Seat: The detachable surface parts in valve are used t... |
 |
Tungsten Carbide Valve Seats FAQ FOR CLIENTS | Tungsten Carbide Valve SeatsFAQ FOR CLIENTS Custom Valve Seats Valve Seat: The detachable surface parts in valve are used to support the valve spoo... |
 |
COMMON Valve Seat Coating MATERIALS | COMMON Valve Seat CoatingMATERIALS Valve Seat: The detachable surface parts in valve are used to support the valve spool in the fully closed positi... |
 |
Custom Valve Gate Product Data | Custom Valve GateProduct Data GATES OF GATE VALVE Valve Gate: The core parts of flat gate valves used in the petrochemical industry require high pr... |
Same products
 |
阀 | 卖方: 荣腾鑫诺（天津）国际贸易有限公司 | 液压阀 |
 |
Class 300 Valve | 卖方: GangYe Group Co.,Ltd. | Class 300 valves have a pressure rating of 300 pounds per square inch (psi) or 20.7 bar, allowing... |
 |
Class 3000 Industrial Valve | 卖方: GangYe Group Co.,Ltd. | Wafer Body, Full Port Design, Flanged End Class 3000 Ball Valve. A ball valve class 3000pressure-... |
 |
Class 2500 Industrial Valve | 卖方: GangYe Group Co.,Ltd. | Class 2500 valves can be used for both on-off and throttling applications. The specific valve typ... |
 |
Class 150 Valve | 卖方: GangYe Group Co.,Ltd. | globe valve class 150is a pressure rating designation defined by standards organizations, such as... |
