Flanged Concentric Butterfly Valve
Basic information
This valve offlanged butterfly valve manufacturersis used in various service and drain lines as truncation and regulating equipment.
Features
1. Bidirectional sealing, no flow direction of the medium;
2. Valve body vulcanized EPDM, reliable sealing;
3. A dial with an opening indication showing the position of the disc switch;
4. Flow characteristics straight line, good regulation performance.
2. Valve body vulcanized EPDM, reliable sealing;
3. A dial with an opening indication showing the position of the disc switch;
4. Flow characteristics straight line, good regulation performance.
Principle
The rotary center of the flanged butterfly disc (that is, the center of the stem) is located on the centerline of the valve body and the sealing surface section of the disc. When the disc is closed, the disc's circular sealing surface squeezes the synthetic rubber seat so that the seat produces elastic deformation and forms the elastic force to seal the butterfly valve. If the remote control is required, different types of electric devices can be equipped according to different working conditions.
Installation and Commissioning
Clean the inner cavity and sealing cover of the valve before installation. This butterfly valve can be installed on the horizontal, vertical and any Angle pipe, and can be used in both directions. The butterfly valve must be in the closed position during installation to ensure that the disc does not collide with the pipe flange. Make sure the flange welding is correct. After the butterfly valve is installed, it is not allowed to weld the flange again, so as not to burn the rubber parts and the anti-corrosion coating. For specific use, please consult ZhengFeng Valve Group.
|
Part |
Material |
Standard |
|
Body |
Ductile Iron |
EN 1563/DIN 1693 |
|
Disc |
Ductile Iron |
EN 1563/DIN 1693 |
|
Seat |
EPDM / NBR |
ISO 4633 |
|
Stem |
Stainless Steel 431 |
EN10088-1/ASTM A959 |
|
Bolt |
Stainless Steel 431 |
EN10088-1/ASTM A959 |
|
Worm Actuator |
Ductile Iron |
EN 1563/DIN 1693 |
|
For the materials options not listed, consult factory. ZhengFeng manufactures valves in more than 50 different alloys. |
||
在线联系供应商
Other supplier products
 |
3 Inch Ball Valve | Description of 3 inch stainless steel ball valve: ZECO3 inch ball valveis usually a floating ball valve, the material can also be divided into cast... |
 |
Floating Ball Valve | Description of Floating Ball Valve: ZECO floating ball valve has two seats supporting the ball. Under medium pressure, the ball can be pressed tigh... |
 |
Gear Operated Ball Valve | Description of Gear Operated Ball Valve: Large size ball valve if adopt manual operation will reduce the efficiency of personnel, even if many peop... |
 |
Disc Wafer Check Valve | ZECO Valve Group, founded in 1991 with focus on manufacturing china water valve, including control valves, balancing valves, gate valve, butterfly ... |
 |
Bronze Adjustable Dynamic Flow Balancing Valve | ZECO is one of the leading check valve manufacturers china, China. ZECO check valveprovides non-slam closure, have a low head loss and close drip-t... |
