Stainless Steel Butterfly Valve
Description of Stainless Steel Butterfly Valve:
ZECO stainless steel butterfly valve is a kind of butterfly valve with high performance and long service life. It is mainly composed of driving device and stainless steel parts. The valve body, butterfly disc and inner parts are made of stainless steel. Although stainless steel butterfly valve is produced with high quality materials, if the installation is not proper, no matter how good the material is, it will cause problems or have worse effect than the product of ordinary material with good maintenance. So valve installation is the key factor to affect valves’life-extension. Mal installation will reduce the valve performance. So following instructions shall be confirmed before installation.(a)Carefully unpacking the cases, read the material, specification, tags and so on to make sure the valve is qualified to install; (b) Do pay attention to the warnings on a valve tag, and following instructions; (c)Check the flow direction mark, if the valve is marked with flow direction, valve must be installed as per this direction; (d)Check to find if the valve tunnel is clean, safe and without any corrosive substances. Get rid of packing and stuffing which blocks movement of a valve; (e)Check if piping to connect valve are clean. If not, clean before installation.ZECO is one of the leading ss butterfly valves suppliersin China.
Features of Stainless Steel Butterfly Valve:
- SSbutterfly valvecombines the three offsets of the seating surface with the flexibility of graphite lamination to achieve a tight and uniform seal with a low required torque;
Material of Stainless Steel Butterfly Valve:
|
No |
Part |
Material |
|
1 |
Body |
ASTM A351 CF8 |
|
2 |
Seal Ring |
Graphite + SS304 |
|
3 |
Retainer Flange |
ASTM A182 F304 |
|
4 |
Pin |
ASTM A276 304 |
|
5 |
Disc |
ASTM A351 CF8 |
|
6 |
Stem |
ASTM A276 304 |
|
7 |
Stem Packing |
Graphite |
|
8 |
Stem Beating |
SS304 + PTFE |
|
9 |
Bolt |
ASTM A193 B8 |
|
10 |
Nut |
ASTM A194 8 |
|
11 |
Yoke |
ASTM A216 WCB |
在线联系供应商
Other supplier products
 |
Bronze Flow Balancing Valve | Basic information Venturi flowmeter is adopted in the body of a balanced valve with threaded connections to make flow adjustment more accurate and ... |
 |
Stainless Steel Gate Valve | Description of Stainless SteelGate Valve: ZECO stainless steel gate valve is basically used for pipelines with corrosive media. For any kind of sta... |
 |
Stainless Steel Gate Valve | Categories: Gate Valve, Gate Valve By Material Tag: OS&Y Valve Description ZECO Valve supplies china stainless steel gate valves in the versio... |
 |
Backflow Preventers | ZECO Valve Group is established in 1991, as an experienced china valve manufacturer. We have 5 factories in China, which are located in Shanghai, Y... |
 |
Float Control Valve | Basic InformationThisthe level of the water in the water tower or sink.Features1. Stable and reliable work, large flow;2. Disc fast open and slowly... |
Same products
 |
阀 | 卖方: 荣腾鑫诺（天津）国际贸易有限公司 | 液压阀 |
 |
Class 300 Valve | 卖方: GangYe Group Co.,Ltd. | Class 300 valves have a pressure rating of 300 pounds per square inch (psi) or 20.7 bar, allowing... |
 |
Class 3000 Industrial Valve | 卖方: GangYe Group Co.,Ltd. | Wafer Body, Full Port Design, Flanged End Class 3000 Ball Valve. A ball valve class 3000pressure-... |
 |
Class 2500 Industrial Valve | 卖方: GangYe Group Co.,Ltd. | Class 2500 valves can be used for both on-off and throttling applications. The specific valve typ... |
 |
Class 150 Valve | 卖方: GangYe Group Co.,Ltd. | globe valve class 150is a pressure rating designation defined by standards organizations, such as... |
