Bronze Adjustable Dynamic Flow Balancing Valve
ZECO is one of the leading check valve manufacturers china, China. ZECO check valveprovides non-slam closure, have a low head loss and close drip-tight. In applications where return flow protection is desired, ZECO's Check valves provide superior and leak-free performance.
Basic information of Bronze Adjustable Dynamic Flow Balancing Valve
This bronze balancing valveis required to maintain the flow of these pipes or end equipment at all times within the working differential pressure range. As the system pressure fluctuates, the valve will automatically move up and down to change the opening, thus keeping the pipeline flow constant.
Features of Bronze Adjustable Dynamic Flow Balancing Valve
No external energy is required for automatic flow regulation;2. Automatically adjust equipment or pipeline flow to meet the required design flow;3. No need for balance debugging before the system runs;4. Keep pipe flow constant.
Principle of Bronze Adjustable Dynamic Flow Balancing Valve
When the pressure difference control range is above, the valve tank is completely compressed, and the cross flow area is only the minimum design channel and the flow rate changes with the pressure difference. When the pressure difference is within the control range, the valve tank moves with the pressure difference, thus changing the flow area and keeping the flow at the set value. Under the pressure differential control range, the valve is fully extended to reveal the maximum overcurrent area and the flow rate changes with the pressure difference.
Installation and Commissioning of Bronze Adjustable Dynamic Flow Balancing Valve
This valve is mainly used for flow regulation and hydraulic balance. It can not be used as a shutoff valve because there is a certain amount of leakage when it is closed. For specific use, please consult ZECO Valve Group.
Product scope , Standards & Materials of Bronze Adjustable Dynamic Flow Balancing Valve
Size Range: 3/4"~2"Pressure Rating: 10bar ~ 16barFace to Face Dimensions: EN 558-1, ASME B 16.10Flange End Dimension: BS 21Inspection and Test: ISO 5208 / EN 12226-2
在线联系供应商
Other supplier products
 |
Stainless Steel Gate Valve | Categories: Gate Valve, Gate Valve By Material Tag: OS&Y Valve Description ZECO Valve supplies china stainless steel gate valves in the versio... |
 |
Triple Offset Butterfly Valve | To withstand high temperature, the metal seal must be used, but large leakage; For zero leakage, rubber seal must be used, but not high-temperature... |
 |
Backflow Preventers | The problem of contaminated water due to backflow is emerging, and the health hazards caused by contaminated water are also alarming to engineers a... |
 |
3 Inch Butterfly Valve | Description of 3 Inch Butterfly Valve: ZECO 3 inch flanged butterfly valveis a small diameter butterfly valve, usually manually operated, and the c... |
 |
Pressure Relief Valve | Festures of Pressure Relief Valve Accurate Pressure Control Fast Opening to Maintain Line Pressure Slow Closing to Prevents Surges Comp... |
Same products
 |
阀 | 卖方: 荣腾鑫诺（天津）国际贸易有限公司 | 液压阀 |
 |
Class 300 Valve | 卖方: GangYe Group Co.,Ltd. | Class 300 valves have a pressure rating of 300 pounds per square inch (psi) or 20.7 bar, allowing... |
 |
Class 3000 Industrial Valve | 卖方: GangYe Group Co.,Ltd. | Wafer Body, Full Port Design, Flanged End Class 3000 Ball Valve. A ball valve class 3000pressure-... |
 |
Class 2500 Industrial Valve | 卖方: GangYe Group Co.,Ltd. | Class 2500 valves can be used for both on-off and throttling applications. The specific valve typ... |
 |
Class 150 Valve | 卖方: GangYe Group Co.,Ltd. | globe valve class 150is a pressure rating designation defined by standards organizations, such as... |
