Pressure Relief Valve
Festures of Pressure Relief Valve
Accurate Pressure Control
Fast Opening to Maintain Line Pressure
Slow Closing to Prevents Surges
Completely Automatic Operation
Pressure Relief Valve Working Principle
Inlet pressure water enters the lower cavity of the pilot valve diaphragm from the guide valve when the pressure in the pipeline exceeds the set pressure of the guide valve to make its pressure increase to open the guide valve, the main water valvecontrol room outwards drain under the effect of the inlet pressure water to open the main valve, it starts to discharge pressure. When the pressure in the pipeline drops to the set pressure, the pressure in the lower cavity of the guide valve diaphragm decreases, causing the guide valve closed. This results in increased water pressure from the guide pipe to the pilot valve, then to the main valve control room. The main valve plate closes and begins to hold pressure.
Pressure Relief Valve Installation and Commissioning
The cold water pressure relief valvesupports horizontal and vertical installation but should pay attention to the inlet and outlet direction of valve body water when installing. In general, one fire water supply system can only install one pressure relief valve . Within the operating pressure range of the spring specified in the nameplate, the opening pressure can be adjusted by rotating the adjusting screw to change the spring compression amount. For specific use, please consult ZECO valve and gate group.
Pressure Relief Valve Material and Standard
Size Range: 2"~24"
Pressure Rating: 10bar ~ 25bar
Face to Face Dimensions: AMSE B16.10, EN558-1
Flange End Dimension: AMSE B16.1/16.42, AS4087, EN1092-2
Coating: Fusion Bonded Epoxy Coating
Inspection and Test: ISO 5208 / EN 12226-2
As one of pressure relief valve manufacturers, we also have types of pressure relief valvefor sale, if you want to buy pressure relief valve, please contact us.
If you want to know more about purpose of pressure relief valve, please visit our website.
在线联系供应商
Other supplier products
 |
6 Inch Ball Valve | Description of 6 Inch Ball Valve:ZECO Valve Group is a well-known ball valve manufacturer in China.Since its establishment in 1991, it has been pro... |
 |
Pressure Reducing Valve | It adjusts and controls the outlet pressure of the main valve to enable the outlet pressure of the main valve not vary with inlet pressure, enable ... |
 |
Differential Pressure Control Valve | Festures of dpcv valve Accurate and stable pressure difference control； 20-250Kpa Pressure difference control range; Simple debugging, without c... |
 |
Adjustable Dynamic Flow Balancing Valve | Basic information This valve can manually adjust the set flow rate in the pipeline, and also can automatically maintain the pressure difference bef... |
 |
Knife Gate Valve | Features of sewer knife gate valve Full bore design for high media throughput capacity; U-shaped gasket with good sealing effect; Gate pla... |
