Pressure Relief Valve
Festures of Pressure Relief Valve
Accurate Pressure Control
Fast Opening to Maintain Line Pressure
Slow Closing to Prevents Surges
Completely Automatic Operation
Pressure Relief Valve Working Principle
Inlet pressure water enters the lower cavity of the pilot valve diaphragm from the guide valve when the pressure in the pipeline exceeds the set pressure of the guide valve to make its pressure increase to open the guide valve, the main water valvecontrol room outwards drain under the effect of the inlet pressure water to open the main valve, it starts to discharge pressure. When the pressure in the pipeline drops to the set pressure, the pressure in the lower cavity of the guide valve diaphragm decreases, causing the guide valve closed. This results in increased water pressure from the guide pipe to the pilot valve, then to the main valve control room. The main valve plate closes and begins to hold pressure.
Pressure Relief Valve Installation and Commissioning
The cold water pressure relief valvesupports horizontal and vertical installation but should pay attention to the inlet and outlet direction of valve body water when installing. In general, one fire water supply system can only install one pressure relief valve . Within the operating pressure range of the spring specified in the nameplate, the opening pressure can be adjusted by rotating the adjusting screw to change the spring compression amount. For specific use, please consult ZECO valve and gate group.
Pressure Relief Valve Material and Standard
Size Range: 2"~24"
Pressure Rating: 10bar ~ 25bar
Face to Face Dimensions: AMSE B16.10, EN558-1
Flange End Dimension: AMSE B16.1/16.42, AS4087, EN1092-2
Coating: Fusion Bonded Epoxy Coating
Inspection and Test: ISO 5208 / EN 12226-2
As one of pressure relief valve manufacturers, we also have types of pressure relief valvefor sale, if you want to buy pressure relief valve, please contact us.
If you want to know more about purpose of pressure relief valve, please visit our website.
Send product request
Other supplier products
 |
Triple Offset Butterfly Valve | Here is the china double eccentric butterfly valve.To withstand high temperature, the metal seal must be used, but large leakage; For zero leakage,... |
 |
Backflow Preventers | ZECO Valve Group is established in 1991, as an experienced china valve manufacturer. We have 5 factories in China, which are located in Shanghai, Y... |
 |
Modulating Float Valve | Features of modulating float control valve Stable and reliable work, large flow; Disc fast open and slow closed, no water hammer impact; Goo... |
 |
Knife Gate Valve | Features of sewer knife gate valve Full bore design for high media throughput capacity; U-shaped gasket with good sealing effect; Gate pla... |
 |
Fire Protection Groove end Concentric Butterfly Valve | Basic informationThisvalvecan be used to cut off, switch on and adjust the medium in the pipeline.Features1. Disc and stem are connected without th... |
Same products
 |
China Gate valve | Seller: Yuanda Valve Group Co.,Ltd. | China Gate valve China Gate valve A is a type of valve that uses a gate or wedge-shaped dis... |
 |
Gate Valve Vs. Ball Valve | Seller: Yuanda Valve Group Co.,Ltd. | Gate Valve Vs. Ball Valve Gate valves and ball valves are both types of valves that are used... |
 |
Non Return Valve Suppliers China | Seller: Yuanda Valve Group Co.,Ltd. | Non Return Valve Suppliers China refers to the opening and closing member for the circular v... |
 |
Common Types Of Check Valves | Seller: Yuanda Valve Group Co.,Ltd. | Common Types Of Check Valves A is a valve whose switching parts are disc-shaped and rely on ... |
 |
Brass ball valve | Seller: Yuanda Valve Group Co.,Ltd. | Brass ball valve Brass ball valve Applications: Water Supply: Commonly used in residentia... |
