Backflow Preventers
Festures of Backflow Preventers
The double check valve is designed as a whole, with small structure；
Body is streamlined with little resistance loss；
Combination of a double check valve and safety drain valve can completely prevent backflow pollution under any working condition；
All moving parts are made of non-rust and wear-resistant materials with long service life.
Backflow Preventers Working Principle
Backflow preventers for two check valve series, when one of the seal damage, the other also ACTS as a seal to prevent backflow. However, when the sealing oftwo check valvesis broken at the same time, the check function is lost. Backflow preventers on the common type of foundation in the middle of the drain, so even if two check valve sealing at the same time damage, it can also play a role in preventing backflow pollution.
Backflow Preventers Installation and Commissioning
This valve must be installed horizontally, the environment of the installation site should be clean, there should be sufficient maintenance space, the main degree of safety drain or (air barrier) outlet is more than 300mm above the ground, and it should not be flooded by water or debris, and the installation area should be equipped with drainage facilities. For specific use, please consult ZECO Valve Group.
Backflow Preventers Material and Standard
Size Range: 2"~12"
Pressure Rating: 10bar ~ 25bar
Face to Face Dimensions: AMSE B16.10, EN558-1
Flange End Dimension: AMSE B16.1/16.42, AS4087, EN1092-2
Coating: Fusion Bonded Epoxy Coating
Inspection and Test: ISO 5208 / EN 12226-2
|
Part |
Material |
Standard |
|
Body |
Ductile Iron |
EN 1563/DIN 1693 |
|
Bonnet |
Ductile Iron |
EN 1563/DIN 1693 |
|
Seat |
CuZn39Pb1 / C37000 |
EN12167/ASTM B135 |
|
Stem |
Stainless Steel 431 |
EN10088-1/ASTM A959 |
|
Spring |
Stainless Steel 431 |
EN10088-1/ASTM A959 |
|
Seal |
EPDM / NBR |
ISO 4633 |
|
For materials options not listed, consult factory. Zeco manufactures valves in more than 50 different alloys. |
||
ZECO Valve Group is an experienced valve manufacturer. We provide china valve, water valve, 2.5 inch backflow preventer, double backflow valve, 4 double check backflow preventer, 6 rpz backflow preventer, rpz backflow prevention, 3 inch backflow valve, etc. Contact us to know where to buy backflow preventeror more.
There are many backflow preventer suppliers, but we are one of the best choices for you.
在线联系供应商
Other supplier products
 |
Cast Steel Gate Valve | Description of Cast Steel Gate Valve: ZECO cast steel gate valve Chinais in controlled under the quality assurance system of production and manufa... |
 |
Backflow Preventers | ZECO Valve Group, founded in 1991 with focus on manufacturing china water valve, including control valves, balancing valves, gate valve, butterfly ... |
 |
Combined Butterfly-Check Valve | ZECO Valve Group, founded in 1991 with focus on manufacturing china water valve, including control valves, balancing valves, gate valve, butterfly ... |
 |
Pressure Relief Valve | Festures of Pressure Relief Valve Accurate Pressure Control Fast Opening to Maintain Line Pressure Slow Closing to Prevents Surges Comp... |
 |
Check Valve | The check valve for water of ZhengFeng is the advanced pipe control equipment at home and abroad, mainly installed at the entrance of hydropower st... |
