Alkaline battery recycling 1000kg/hr capacity

Technical parameters:

1. Capacity:1 tons per hour
2. Size: 42574*W8798*4098 mm (The proposed site area planning size :L43M*W10M*H4.3M)
3. Total Power:301KW
4. Electricity: 3 Phase, 380V, 50HZ (Tailor made available)
5. Powder recovery rate: ≥95%
6. Noise, dust leakage and exhaust emission meet the national relevant standard and requirements. 7. metal recovery rate (weight%): ≥ 99%
8. Carbon recovery rate (weight%):≥ 99%
9. The noise, dust leakage and exhaust emission meet the relevant national standards and requirements
10. Site requirements: Length is above 7m; door width is above 4m, height is above 5m; Load weight is above 10 t.
11. Equipment appearance and color: Manufacturer standard.

i) Process Description in short:
Step 1.The battery conveyed by belt conveyor for Preliminary crushing,then conveyed to the second crusher for get smaller particles.
Step 2.the particles after the second crusher conveyed to the third crusher for powder ,between the second and the third crusher there is a magnetic separator for removal iron particles.
And added the cooling tower is to prevent the crusher getting any fire.
Step 3.Material powder state by the vacuum system into the cyclone air filter and air flow through the blower down to the air separation machine ,by the air separation machine to sorting the different densities of material stratification, and finally get the metal separation.And all non-metallic sucked into pulse dust collector by blower.
Step 4.The tail gas will continue to be fed by the negative pressure system to the tail gas treatment equipment for air purification, until it reaches the national emission standards and then high-altitude emissions.
Step5:Those Pulse dust collector,cyclone dust collectors,Spray tower and purifier system are for de dusting and environment friendly.