.

100mm height, 5mm width Expansion bolt

are flat after use due to small drilling, large tension, and can be removed at will if they are not used. The advantages of keeping the wall flat are obvious and widely used in various decoration occasions.

Given the fastening mechanism, it's clear that expansion bolts are typically employed in applications where the standard threading cannot be created. In spite of the numerous similarities that it shares with the nail-in anchors featuring nylon sleeves, these bolts are utilized in heavy-duty applications such

as stadium seating or securing pews. There are several expansion bolt assemblies available, each serving a different role:

: As their name suggests, these fasteners are designed to never be removed. They can be identified by the steel cone covering the head of the bolt.

Permafix Security Expansion Bolts: Commonly used to secure bars and grilles in place.

: Made from steel, the fasteners can be installed and removed via an anti-tamper tool.

Expansion bolts are not only flexible and pliable, but they are also reliable and strong. Perhaps the most appreciated feature is that they are not dependent on the quality of the materials used. For instance, in the construction industry, you can be certain the expansion bolt will continue to do its job, regardless of the quality of the concrete or brick.

A further appreciated is that they allow some room for error. Referring to the construction industry again, these fasteners are flexible enough to ensure a safe installation, despite the fact that the drilled holes present minor misalignments.

More information please


在线联系供应商

至: SHAHE GOLDEN DEER TRADING CO.,LTD
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

1500mm high 20cm width 3mm thick Steel formwork
1500mm high 20cm width 3mm thick Steel formwork Steel formwork is used for concrete pouring. In addition to steel formwork, there are wooden formwork, plywood formwork, etc. is widely used in ...
0.9mm diameter,Unlimited height,the black tie wire
0.9mm diameter,Unlimited height,the black tie wire Cutting wire is to cut off such as bright iron wire, fired wire, electro-galvanized wire, , plastic-coated iron wire, painted iron wire, etc. accor...
1.5kg Scaffolding fasteners
1.5kg Scaffolding fasteners , Used for fixing steel pipe scaffold with outer diameter of 48mm considerably longer than is need when the nut has been tightened. This excess...
9.5mm-200mm high,5mm diameter drill tail wire
9.5mm-200mm high,5mm diameter drill tail wire : The head type has flat head / round head / large flat head / The hexagonal head and the tail wire have been tested for tension, torque, screwing ...
Mobile Crusher
Mobile Crusher is mainly used for metallurgy, chemical industry, building materials, hydropower and other materials that often require relocation operations, esp...
供应产品

Same products

China manufacturer bolts heater 1.2311(4)-φ15X500 for power generation
China manufacturer bolts heater 1.2311(4)-φ15X500 for power generation 卖方: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD "China manufacturer bolts heater 1.2311(4)-φ15X500 for power generationIs YOYIK for the use o...
China made SEAL,STEAM,LP-B6TH DIPRAGM Steam Turbine CIV CB25-8.82/0.98/0.118 for power plant
China made SEAL,STEAM,LP-B6TH DIPRAGM Steam Turbine CIV CB25-8.82/0.98/0.118 for power plant 卖方: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD "China made SEAL,STEAM,LP-B6TH DIPRAGM Steam Turbine CIV CB25-8.82/0.98/0.118 for power plantis a...
China manufacturer Regulating Valve Stem Steam Turbine LP inner cylinder N600-23.8/566/566 for power generation
"China manufacturer Regulating Valve Stem Steam Turbine LP inner cylinder N600-23.8/566/566 for power generation 卖方: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD "China manufacturer Regulating Valve Stem Steam Turbine LP inner cylinder N600-23.8/566/566 for p...
China factory Cap Nut 1-3/8(GH)  Steam Turbine LP casing N300-16.7/538/538-1
China factory Cap Nut 1-3/8(GH) Steam Turbine LP casing N300-16.7/538/538-1 卖方: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD China factory Cap Nut 1-3/8(GH) Steam Turbine LP casing N300-16.7/538/538-1 for power station Our...
China supplier OIL DEFLECTOR,BRG@-1,BFPT Steam Turbine HP MSV CCLN1000-25/600/600
"China supplier OIL DEFLECTOR,BRG@-1,BFPT Steam Turbine HP MSV CCLN1000-25/600/600 卖方: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD "China supplier OIL DEFLECTOR,BRG@-1,BFPT Steam Turbine HP MSV CCLN1000-25/600/600 power plant sp...