electromagnetic flowmeter
electromagnetic flowmeter
SFE900 Electromagnetic flowmeter
is a product with high precision and high reliability after continuous upgrading and improvement. The flowmeter has reached the domestic advanced level in terms of excitation technology, lining technology and intelligent technology
Electromagnetic Flowmeter
The electromagnetic flowmeter can handle critical flow applications to enhance accuracy, reduce system maintenance, and meet the demands of challenging liquid conditions. This volumetric flowmeter has no moving parts, making it ideal for wastewater applications or any dirty liquids that are conductive or water-based.
Features
Utilizing an integral welding structure, the device ensures excellent sealing performance.
The structure with no moving components internally is straightforward and dependable, leading to minimal pressure loss.
The instrument demonstrates quick responsiveness, providing an output signal that linearly corresponds to the flow rate with a broad measurement range.
Utilizing low-frequency square wave excitation, the device exhibits excellent anti-interference capabilities and stable zero-point performance.
With excitation fault alarm function and electrode fault data judgment function.
The converter has good interchangeability, and accuracy measurement can be achieved without recalibrating.
Featuring parameter setting storage function, it can restore the original settings with a single key press.
The installation requirements are simple. The front straight pipe section is 5D or above, and the rear straight pipe section is greater than 3D (D is the inner diameter of the instrument).
Equipped with an empty pipe alarm function to prevent measurement errors caused by flow meter data fluctuations due to empty pipe interference.
Only the lining and electrode of the instrument are in contact with the measured medium, so the requirements of corrosion and wear resistance can be achieved on more occasions.
High measurement accuracy with minimal interference from factors such as flow velocity distribution, pressure, temperature, etc., and it supports bidirectional measurements.
The sensor has low power consumption, with the total power consumption of the complete instrument being less than 10VA (DC 10W), irrespective of the sensor size.
Featuring a display angle configuration function, it supports display angles set at 0°, +90°, 180°, and -90°.
The L-shaped meter head design facilitates installation in process industries, as well as parameter observation and data reading.
在线联系供应商
Other supplier products
 |
liquid mass flow meter | liquid mass flow meter Liquid Mass Flow Meter A is a precision instrument used to measure the mass flow rate of a liquid passing through a pi... |
|
|
electromagnetic flowmeter | electromagnetic flowmeter SFE900 Electromagnetic flowmeter is a product with high precision and high reliability after continuous upgrading a... |
 |
LN85 Series Cage Guided Globe Control Valve | LN85 Series Cage Guided Globe Control Valve LN85series are LN8 series pressure balance control valvesproducts, one of the three basic has separable... |
 |
GL Series Discharge Valve suitable for fine chemical and pharmaceutical | GL Series Discharge Valvesuitable for fine chemicalandpharmaceutical GL series up-spreading/down-spreading discharge valveis a special singleseat r... |
 |
vortex flowmeter | vortex flowmeter LUGB Vortex Flowmeter It features a robust design that resists mechanical vibrations, impacts, and contamination. With no mo... |
