High and low temperature-humidity test chamber
| 1.1. Temperature range | -60℃~150℃ | |
| 1.2. Humidity range | 30%~98% RH | |
| 1.3. Temperature uniformity | ≤2℃ (empty load) | |
| 1.4. Humidity uniformity | +2% -3% RH | |
| 1.5. Temperature volatility | ±0.5℃(empty load) | |
| 1.6. Humidity volatility | ±2% | |
| 1.7. Temperature deviation | ±2℃ | |
| 1.8. Humidity deviation | ±2% | |
| 1.9. Temperature decrease rate | 0.7~1.0℃/min | |
| 1.10. Temperature increase rate | 1.0~3.0℃/min | |
| 1.11. Time setting range | 1~9999H | |
| 1.12. Total power | 4.5KW/5.5KW/7.5KW/10.0KW/11.5KW (-20℃) | |
| 5.5KW/6.0KW/9.0KW/11.5KW/12.5KW (-40℃) | ||
| 1.13. Power supply requirements | 6.0KW/8.0KW/11.5KW/15.5KW/15.5KW (-60℃) | |
| AC380V±10% 50±0.5Hz (three-phase five wire system) | ||
在线联系供应商
Other supplier products
| High and low temperature-humidity test chamber | 1.1. Temperature range -60℃~150℃ 1.2. Humidity range 30%~98% RH 1.3. Temperature uniformity ≤2℃ (empty load) 1.4. Humidity uniformi... | |
| Lenpure Three Zones Thermal Shock Test Chamber | Temperature Rage -60 deg C to 150 deg C Hot Zone 50 deg C to 200 deg C Cold Zone -60 to 10 deg C Temperature volatility less than +-1 deg ... | |
| Bench-top Precise Drying Oven | Model LRHS-U9023A LRHS-U9053A LRHS-U9070A LRHS-U9140A LRHS-U9240A Interior Dimension (mm) 340 x 325 x 300 420 x 395 x 350 450 x 400 x 450 550 ... | |
| Lenpure Three Zones Thermal Shock Test Chamber | Temperature Rage -60 deg C to 150 deg C Hot Zone 50 deg C to 200 deg C Cold Zone -60 to 10 deg C Temperature volatility less than +-1 deg ... | |
| Efficient Ozone Aging Test Chamber | 1. Technical indexes 1.1. Temperature range 25deg C to 65deg C 1.2. Humidity range 30 to 65%RH 1.3. Temperature uniformity lesson than or ... |
Same products
| Air Permeability Tester STD- F8 | 卖方: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... | |
| Surface Performance Tester STD-FB4 - A | 卖方: Standard International Group (HK) Limited | Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti... | |
| Compression Tester STD - FB3 - A | 卖方: Standard International Group (HK) Limited | TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar... | |
| Single - Strand Bending Tester STD - FB2 - SH | 卖方: Standard International Group (HK) Limited | Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ... | |
| Bending Tester STD- FB2 - S | 卖方: Standard International Group (HK) Limited | Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig... |














