Protective clothing blood penetration testing machine
The test principle of Protective clothing blood penetration testing machine is as follow: place the sample on the tester, add the test suspension liquid and begin the test under prescribed time and pressure. Based on this test method, the tester still can detect the live virus penetrating through the material under the condition of invisible liquid penetration, and supplements the shortcomings of visual penetration test.
Standards:
ASTM F903, ASTM F1670, ASTM F1671/F1671M , YY/T0700, GB19082, ISO16603, ISO 16604, IS 16545, IS 16546
Specifications:
Pressure range: (05~ 25) kPa
Test area: 28.26cm?
Specimen size: 75 * 75 mm
Power: 220 V, 50 Hz, 50 W
Weight: 30 Kg
Dimensions: 560 * 460 * 480 mm (L x W x H)
Packaging info.: 720 * 620 * 730 mm (L x W x H), 57 Kg
The resistance of a protective clothing material to penetration by blood and body fluids is determined by subjecting the material to synthetic blood as a body fluid simulant for a specified time and pressure sequence and observing if visible penetration of the liquid occurs. In the penetration test apparatus, the clothing material acts as a partition separating the body fluid simulant from the viewing side of the test cell. Any evidence of synthetic blood penetration constitutes failure.
Qinsun Instruments Co., LTD was founded in 2010, comprised of many experienced engineers and designers standing in the forefront of the industry. Qinsun specialize in the research and development of high quality lab instrument for textile testing industry. Our head office in Shanghai and we provide high quality testing instrument and comprehensive service for textile factory, academic research institute and textile lab worldwide.
在线联系供应商
Other supplier products
 |
burning tester for Medical mask | burning tester for Medical mask is used to test the flammability of medical masks, to ensure the safety of masks to wear in. Standards: GB 19083-2... |
 |
Flame Resistance Chamber Burning Tester For Full Face Masks | Flame Resistance Chamber Burning Tester For Full Face Masks is mainly used for plastic, rubber or film directly measured without burning combustion... |
 |
EN 136 Full Face Masks Flame Resistance Tester | The EN 136 Full Face Masks Flame Resistance Tester is a mask with a head mold at a certain line speed after contact with the flame, then test the b... |
 |
Protective Clothing Material Penetration Tester | Medical protective clothing Synthetic Blood Penetration Tester is used to measure the penetration of synthetic blood and other liquid-derived liqui... |
 |
Synthetic Blood Penetration Resistance Tester G286 | Synthetic Blood Penetration Resistance Tester is applicable to the resistance of the protective clothing to the synthetic blood penetration under d... |
Same products
 |
Air Permeability Tester STD- F8 | 卖方: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... |
 |
Surface Performance Tester STD-FB4 - A | 卖方: Standard International Group (HK) Limited | Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti... |
 |
Compression Tester STD - FB3 - A | 卖方: Standard International Group (HK) Limited | TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar... |
 |
Single - Strand Bending Tester STD - FB2 - SH | 卖方: Standard International Group (HK) Limited | Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ... |
 |
Bending Tester STD- FB2 - S | 卖方: Standard International Group (HK) Limited | Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig... |
