BKNET-0102 Welded Pipe Eddy Current Flaw Detector
The technology of BKN originated from eddy current Laboratory of Institute of Materials, Nanjing University of Technology. At present, it is a leading high-tech enterprise specializing in developing types of NDT non-destructive testing instruments and equipment in China. As one of the non destructive testing equipment suppliers, the company is committed to the development of eddy current, ultrasonic, magnetic flux leakage and various non-standard equipment, holding independent research and development of a number of national patents.
Eddy current weld testingis the use of eddy current technology to test the welded pipe, this type of NDT testingis based on the premise of lossless. At the same time, we need to be clear that the welded pipe is, in general, the steel pipe that we usually say, which is a welded steel pipe.
Eddy current testing of weldsis a non-destructive testing technique for detecting component defects by using the principle that the eddy current induced by the AC electromagnetic coil on the surface of the metal member encounters a defect. The oscillating current is generated in the conductive member by the excitation coil by the principle of electromagnetic induction, and the amount of change in the eddy current is measured by the detecting coil, thereby obtaining information on the component defect.
Eddy current weld inspection equipmentis a non-destructive testing technique in which an alternating current electromagnetic coil induces eddy currents on the surface of a metal member. It is suitable for the detection of defects in conductive materials, including ferromagnetic and non-ferromagnetic metal materials.
BKNET-01 2NDT weld testing equipmentisused for on-line and off-line eddy current weld inspection. It has high sensitively to axial defects such as unwelded welding, dark spots and open cracks. In the production process, products are caused by welder failure. Slow and long-term injuries can be reliably detected.
BKNET-0102 Welded Pipe Eddy Current Flaw Detector performance
|
Detection channel |
Double channel |
|
Detection speed |
1～500m/min(online) |
|
Frequency range |
100Hz-1MHz |
|
Gain |
0～99dB，step0.1dB |
|
Phase rotation |
0-360°step1° |
|
High pass |
|
|
Low pass |
1Hz～10000Hz |
BKNET-0102 Eddy CurrentWeldFlaw DetectorFeatures:
High precision end and end-to-tail signal removal
High precision real-time, delayed alarm output
Fast digital／analog electronic balance
Memory track delay blanking function
Non-equal amplitude phase／amplitude alarm domain
Remote automatic help system
Synchronous alarm output for internal and external clock control
在线联系供应商
Other supplier products
 |
Magnetic Flux Leakage Testing Equipment | Electromagnetic detection is a very important non-destructive testing method and is widely used. Mag flux testingis a magnetic method of nondestruc... |
 |
Eddy Current Testing Equipment | Bokena is one of the most professional eddy current test equipment suppliersin China. We have been devoted to produce ect testing equipmentand ect ... |
 |
GSET-551 Steel Wire Eddy Current Flaw Detector | GSET-551 Steel Wire Eddy Current Flaw Detector GSET-551 Steel Wire Eddy Current Flaw Detector Brief Introduction Using the eddy current signa... |
 |
EDM Notch | Nanjing BKN Automation System Co., Ltd., originated from the eddy current testing laboratory of the Nanjing University of Technology. It is an eddy... |
 |
Eddy Current Testing Equipment | ECT Eddy current testing is a non-contact testing method, which mainly uses the electromagnetic field and electromagnetic induction between metals ... |
Same products
 |
Air Permeability Tester STD- F8 | 卖方: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... |
 |
Surface Performance Tester STD-FB4 - A | 卖方: Standard International Group (HK) Limited | Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti... |
 |
Compression Tester STD - FB3 - A | 卖方: Standard International Group (HK) Limited | TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar... |
 |
Single - Strand Bending Tester STD - FB2 - SH | 卖方: Standard International Group (HK) Limited | Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ... |
 |
Bending Tester STD- FB2 - S | 卖方: Standard International Group (HK) Limited | Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig... |
