Fabric Bursting Strength Tester
Bursting Strength Tester, to test the bursting strength of paper, woven or knitted fabrics, non-woven, fabric and board by the of hydraulic load under a Bursting tester diaphragm of a specific area.
Application:
Fabrics that must bear weight or withstand forces should be tested with a bursting strength tester, before they made into final products like truck covers, tarps, trampoline fabric, pool covers, compactor curtains, agricultural bagging applications and etc., to ensure the bursting strength meet the required requirement.
Digital bursting strength apparatus provides with a digital readout of pressure with peak hold facility, renewable rubber diaphragms. Automatic clamping device with a clear acrylic bell, an LED lamp is equipped for easy observation.
Interchangeable test bells and clamping ring sets 7.3cm2 (Φ30.5mm/l.22inch), 10cm2 (Φ35.7mm), 50cm2 (Φ79.8mm), 100cm2 (Φ112.8mm).
Bursting strength testing machine is provided with three test methods, Constant speed bursting, Certain pressure bursting and Certain extension.
This bursting tester is also called mullen bursting tester because its testing procedure is commonly called Mullen Burst Test, during which the specimen is clamped across a dia. 1.22 inch ring, and a rubber diaphragm below is inflated to push against the specimen until it ruptures.
Unlike mullen test, there is another kind of burst test called ball burst test, if that is what you need, please refer to this tester.
Features:
1, using hydraulic method, in line with the international standard.
2, touch screen control, the interface is simple and easy to understand, easy to operate intuitive, touch sensitive.
3, pneumatic clamping, clamping evenly, and adjust the fixture pressure, to avoid the sample slip or damage, easy to use.
4, the test cover for the high transparent plexiglass, built-in LED lighting, can clearly observe the experimental sample process. Which is a magnet Installation, replacement easy disassembly.
5, automatic induction blasting system, sensitive and reliable.
6, outside the organic glass cover, to prevent the folder wounding, the use of more secure.
7, the use of AC servo drive system, synchronous pulley drive, the instrument running low noise, wide speed range, high operating accuracy.
8, the use of high-speed AD and processor, sampling frequency is high, high test accuracy.
9, the only domestic: fixed speed burst, set pressure, set the expansion, set the time of four test methods.
10, the instrument comes with a thermal printer can print directly report, and support with professional computer software online work.
Standards:
ASTM 3786-06、ISO 2758、ISO 13938-2、BS 3424
BS 3137、BS 4768、AS 2001.2.4、GB/T 7742
IWSTM 29、EDA NA 80.4-02、EDA NA 80.3-99、BS 2922
FZ/T 60019、JIS L 1018.6.17、NEXT 22 2206、FZ/T 01030
Parameters:
|
Test range |
2.00Mpa |
10.00Mpa |
|
Minimum scale value |
0.001Mpa |
0.003Mpa |
|
Measuring range |
full scale 1% ~ 100% |
|
|
Pressure accuracy |
≤ 0.2% FS |
|
|
Accuracy of expansion height |
≤ 0.2% FS |
|
|
Test area |
7.3 cm² (dia.30.5mm), 10 cm² (dia.35.7mm) 50 cm² (dia. 79.8 mm), 100 cm² (dia. 112.8 mm) |
|
|
The maximum expansion |
75 |
|
|
Pressure rate |
20-600ml / min |
|
|
Pressure units |
kPa, kg / cm2, bar, lb / in2 |
|
|
Power |
AC220V / 50Hz |
|
|
Dimensions |
550 × 450 × 700mm |
|
在线联系供应商
Other supplier products
 |
Oxide film abrasive tester | Applicable standards: GB/T 12967: This standard specifies in detail the test method for determining the average wear resistance of aluminum and al... |
 |
Automobile comfort air conditioning dummy test system | Applicable standards： ISO related standards, such as ISO 14505-2, which provide test methods and evaluation indicators for thermal comfort. Berke... |
 |
Car seat center of gravity measuring tester | Main parameters: Measuring range: refers to the maximum and minimum range of the center of gravity of the seat that the tester can measure. This p... |
 |
Fabric Flame Retardant Tester | A method is used to determine the damaged area and the length of the damage when the textiles and other materials are burned at 45 °, and the B... |
 |
Hydropro Hydrostatic Head Tester | TRANSLATE with x English Arabic Hebrew Polish Bulgarian Hindi Portuguese Catalan Hmong Daw Romanian ... |
Same products
 |
Air Permeability Tester STD- F8 | 卖方: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... |
 |
Surface Performance Tester STD-FB4 - A | 卖方: Standard International Group (HK) Limited | Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti... |
 |
Compression Tester STD - FB3 - A | 卖方: Standard International Group (HK) Limited | TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar... |
 |
Single - Strand Bending Tester STD - FB2 - SH | 卖方: Standard International Group (HK) Limited | Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ... |
 |
Bending Tester STD- FB2 - S | 卖方: Standard International Group (HK) Limited | Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig... |
