Fabric Bursting Strength Tester
Bursting Strength Tester, to test the bursting strength of paper, woven or knitted fabrics, non-woven, fabric and board by the of hydraulic load under a Bursting tester diaphragm of a specific area.
Application:
Fabrics that must bear weight or withstand forces should be tested with a bursting strength tester, before they made into final products like truck covers, tarps, trampoline fabric, pool covers, compactor curtains, agricultural bagging applications and etc., to ensure the bursting strength meet the required requirement.
Digital bursting strength apparatus provides with a digital readout of pressure with peak hold facility, renewable rubber diaphragms. Automatic clamping device with a clear acrylic bell, an LED lamp is equipped for easy observation.
Interchangeable test bells and clamping ring sets 7.3cm2 (Φ30.5mm/l.22inch), 10cm2 (Φ35.7mm), 50cm2 (Φ79.8mm), 100cm2 (Φ112.8mm).
Bursting strength testing machine is provided with three test methods, Constant speed bursting, Certain pressure bursting and Certain extension.
This bursting tester is also called mullen bursting tester because its testing procedure is commonly called Mullen Burst Test, during which the specimen is clamped across a dia. 1.22 inch ring, and a rubber diaphragm below is inflated to push against the specimen until it ruptures.
Unlike mullen test, there is another kind of burst test called ball burst test, if that is what you need, please refer to this tester.
Features:
1, using hydraulic method, in line with the international standard.
2, touch screen control, the interface is simple and easy to understand, easy to operate intuitive, touch sensitive.
3, pneumatic clamping, clamping evenly, and adjust the fixture pressure, to avoid the sample slip or damage, easy to use.
4, the test cover for the high transparent plexiglass, built-in LED lighting, can clearly observe the experimental sample process. Which is a magnet Installation, replacement easy disassembly.
5, automatic induction blasting system, sensitive and reliable.
6, outside the organic glass cover, to prevent the folder wounding, the use of more secure.
7, the use of AC servo drive system, synchronous pulley drive, the instrument running low noise, wide speed range, high operating accuracy.
8, the use of high-speed AD and processor, sampling frequency is high, high test accuracy.
9, the only domestic: fixed speed burst, set pressure, set the expansion, set the time of four test methods.
10, the instrument comes with a thermal printer can print directly report, and support with professional computer software online work.
Standards:
ASTM 3786-06、ISO 2758、ISO 13938-2、BS 3424
BS 3137、BS 4768、AS 2001.2.4、GB/T 7742
IWSTM 29、EDA NA 80.4-02、EDA NA 80.3-99、BS 2922
FZ/T 60019、JIS L 1018.6.17、NEXT 22 2206、FZ/T 01030
Parameters:
|
Test range |
2.00Mpa |
10.00Mpa |
|
Minimum scale value |
0.001Mpa |
0.003Mpa |
|
Measuring range |
full scale 1% ~ 100% |
|
|
Pressure accuracy |
≤ 0.2% FS |
|
|
Accuracy of expansion height |
≤ 0.2% FS |
|
|
Test area |
7.3 cm² (dia.30.5mm), 10 cm² (dia.35.7mm) 50 cm² (dia. 79.8 mm), 100 cm² (dia. 112.8 mm) |
|
|
The maximum expansion |
75 |
|
|
Pressure rate |
20-600ml / min |
|
|
Pressure units |
kPa, kg / cm2, bar, lb / in2 |
|
|
Power |
AC220V / 50Hz |
|
|
Dimensions |
550 × 450 × 700mm |
|
Send product request
Other supplier products
 |
Impact Tester | Impact tester is manufactured according to SAE J-575e standard production. The platform of impact is made of steel with meridian salt coating treat... |
 |
Car seat frame durability tester | Applicable standards: GB 11550-2009 "Performance requirements and test methods for car seat headrest" : Appendix B of this standard specifies the ... |
 |
Ross Flex Tester | Whole Sole ROSS Flexing Tester GT-KB05D To determine right angle flexing risistance for whole sole of rubber, PU, PVC, TPR foam and other materials... |
 |
Smoke - Emission Testing Machine for Aerospace Wires and Cables | Standards Compliance: In accordance with the provisions of the U.S. military specifications MIL - W5086C and 22759D, as well as "GJB17.17 - 84 Tes... |
 |
Durability Tester for Automotive Wire Markings | Test Standard: Complies with the ISO19642 standard. Test Method: For the durability tester of automotive wire markings, fix a wire approximate... |
Same products
 |
pH-2398 pH/EC/ORP/Temperature multi-parameter Water Quality Tester | Seller: Kelilong Electron Co.,Ltd | Feature Large display screen, capable of simultaneously measuring water quality pH, redox potent... |
 |
ORP-2026S Waterproof Soil ORP and Temperature Meter | Seller: Kelilong Electron Co.,Ltd | 范围 ORP -999～999mV Temp 0～50℃ 分辨率 ORP 1mV... |
 |
TDS-2616 Waterproof EC/TDS/Temperature Meter | Seller: Kelilong Electron Co.,Ltd | Range EC ～19.9mS TDS Temp 0～50℃ R... |
 |
EC-98330 CF ECOstick - Nutrient Tester | Seller: Kelilong Electron Co.,Ltd | Ideal for hydroponics and agriculture applications, theNutrient Tester accurately measures the el... |
 |
PH-808 Waterproof Soil PH Meter | Seller: Kelilong Electron Co.,Ltd | Model PH-808 Range PH ～14.00PH Temp 0～50℃ ... |
