Positive pressure tester for medical syringes
Product introduction
The positive pressure tester for syringe cohesion is composed of intelligent manipulator,
force measuring mechanism, distance measuring group mechanism, printer and so on.
Among them, the intelligent driver is composed of CPU, motherboard, LCD display screen,
keyboard, power supply and other parts. Implement GB 15810 standard requirements,
positive pressure test principle, check the syringe's tight fitting performance.
Reference standard
GB/T 15810-2001 "Disposable sterile syringe", YY/T 0909-2013.
Test principle
The syringe is sucked into the nominal capacity of water, with the specified axial pressure
and lateral force, the effect on the core rod is 30s, and the part of the jacket and the piston
shall not have leakage phenomenon. Under the effect of 88KPa negative pressure, adhere to
60s±5s, the contact part of the jacket and the piston shall not produce air leakage, and the
piston and the core rod shall not be separated.
Technical parameters
1. Lateral force: 0.25 — 3.00N, error is not more than ±0.5%
2. Axial pressure: 100 — 400kPa, error is not more than ±2%
3. Nominal capacity: 1 — 200ml, optional
4. Test time: 0 — 9999 seconds, arbitrary setting
5. Working temperature: 5 — 40℃
6. Relative humidity: （45 — 80） %
在线联系供应商
Other supplier products
 |
Car seat center of gravity measuring tester | Main parameters: Measuring range:refers to the maximum and minimum range of the center of gravity of the seat that the tester can measure. This pa... |
 |
Geosynthetic Clogging Tester | Scope of application: The method of gradient ratio is used to measure the permeability coefficient and permeability ratio of soil and geotextile s... |
 |
G238BB Electronic Crockmeter | G238BB Electronic Crockmeter(Electronic rubbing colour fastness tester) G238BB Electronic Crockmeteris used for testing the color fastness of fa... |
 |
Single Burning Item | Introduction Single burning instrument (SBI) was measured supplies (excluding floorings) performance at a single burning heat invasion conditions.... |
 |
Helmet Wearing Height Testing Machine | Main Purposes Measure the wearing height of helmets to ensure the accuracy and safety of helmet - wearing positions. Technical Parameters Supp... |
Same products
 |
PH-2398 pH/EC/ORP/温度 多参数测试仪 | 卖方: 科立龙电子股份有限公司 | 大显示，可同时进行水质PH、氧化还原电位、电导率、温度的测量； 带背光LCD显示清晰，功能齐全，精度高； 仪表采用微电脑测量与控制技术，具有自动校准功能，方便实用。 内置蓝牙，可以与电脑或... |
 |
ORP-2026S 防水型 土壤ORP&温度 二合一测试仪 | 卖方: 科立龙电子股份有限公司 | 范围 ORP -999～999mV Temp 0～50℃ 分辨率 ORP 1mV... |
 |
防水型 EC /TDS/温度三合一参数测试仪 | 卖方: 科立龙电子股份有限公司 | 范围 EC ～19.9mS TDS Temp 0～50℃ 分辨率 ... |
 |
EC-98330 电导率营养测试棒 | 卖方: 科立龙电子股份有限公司 | 本营养测试仪适用于水培和农业应用，能够准确测量水中的营养液电导率（EC）单位为mS/cm，以及总溶解固体（TDS）转换为百万分之一（ppm）。 适合需要较高EC值的植物，该测试仪具有高达6.0... |
 |
PH-808防水笔式土壤PH计 | 卖方: 科立龙电子股份有限公司 | 两点按键校准,自动识别pH标准缓冲液 自动温度补偿确保全量程范围的精确测量。 自动电源关闭，有效节省电池能耗。 可替换型电极降低仪表维护与使用成 全防水性能保障在恶劣环境中对仪表的完整保... |
