Negative pressure tester for medical syringes
Main use
The negative pressure tester is mainly used to test the physical characteristics of the body
of the syringe, and is one of the important means to identify the body of the medical syringe.
It is suitable for infusion set, blood transfusion set, infusion needle, anesthesia kit, pipeline,
catheter, filter, quick connector, etc.
Meet the standard
YY0053-2008, GB 15810-2019 single-use sterile syringe, ISO7886-1:2017 single-use sterile
syringe, ISO7886-1, ISO8537-2016, YY0497-2018
Instrument characteristics
It is composed of PLC programmable controller, pressure sensor, control mechanism, etc.
It is easy to operate. Real-time display of pressure value, holding time, automatically end the test.
High brightness LED digital display; The pressure output value can be set arbitrarily, and the
verification error is not more than ±1% of the reading.
Technical parameter
1. Operation interface: Simplified Chinese, English
2. Negative pressure detection: -88Kpa error is not more than ±0.3Kpa, LED digital display;
3. Negative pressure output: -88Kpa±0.3Kpa;
4. Detection range: -5 Kpa —— -99 Kpa adjustable.
5. Test duration: 1S —— 9999S arbitrary setting, LED digital display, error is not more than 0.1 seconds;
6. Power supply: AC220V, 50Hz
7. Machine power: 60W
在线联系供应商
Other supplier products
 |
Car seat belt fixed point test bench | Applicable standards: National mandatory standards: GB 15083-2006 "Automobile seats, seat fixtures and headrests strength requirements and test m... |
 |
Los Angeles Abrasion Tester (JTG E42) | Applicable standards: JTG 3432-2024 "Aggregate Test Regulations for Highway Engineering" : The T0317-2005 Los Angeles method for coarse aggregate ... |
 |
Ozone Aging Chamber for Automotive Wires | The ozone aging chamber for automotive wires is used to test the ozone - resistant aging performance of rubber and its products. Applicable Stan... |
 |
Leather Shoe Hook Core Longitudinal Bending Stiffness Tester | TRANSLATE with x English Arabic Hebrew Polish Bulgarian Hindi Portuguese Catalan Hmong Daw Romanian ... |
 |
45-degree dry cleaning tester | Product Introduction: The instrument is composed of a bottom plate, a control panel and a drum. The clothes to be washed and the dry cleaning agen... |
Same products
 |
Air Permeability Tester STD- F8 | 卖方: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... |
 |
Surface Performance Tester STD-FB4 - A | 卖方: Standard International Group (HK) Limited | Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti... |
 |
Compression Tester STD - FB3 - A | 卖方: Standard International Group (HK) Limited | TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar... |
 |
Single - Strand Bending Tester STD - FB2 - SH | 卖方: Standard International Group (HK) Limited | Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ... |
 |
Bending Tester STD- FB2 - S | 卖方: Standard International Group (HK) Limited | Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig... |
