Negative pressure tester for medical syringes
Main use
The negative pressure tester is mainly used to test the physical characteristics of the body
of the syringe, and is one of the important means to identify the body of the medical syringe.
It is suitable for infusion set, blood transfusion set, infusion needle, anesthesia kit, pipeline,
catheter, filter, quick connector, etc.
Meet the standard
YY0053-2008, GB 15810-2019 single-use sterile syringe, ISO7886-1:2017 single-use sterile
syringe, ISO7886-1, ISO8537-2016, YY0497-2018
Instrument characteristics
It is composed of PLC programmable controller, pressure sensor, control mechanism, etc.
It is easy to operate. Real-time display of pressure value, holding time, automatically end the test.
High brightness LED digital display; The pressure output value can be set arbitrarily, and the
verification error is not more than ±1% of the reading.
Technical parameter
1. Operation interface: Simplified Chinese, English
2. Negative pressure detection: -88Kpa error is not more than ±0.3Kpa, LED digital display;
3. Negative pressure output: -88Kpa±0.3Kpa;
4. Detection range: -5 Kpa —— -99 Kpa adjustable.
5. Test duration: 1S —— 9999S arbitrary setting, LED digital display, error is not more than 0.1 seconds;
6. Power supply: AC220V, 50Hz
7. Machine power: 60W
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Downproof Tester | TRANSLATE with x English Arabic Hebrew Polish Bulgarian Hindi Portuguese Catalan Hmong Daw Romanian ... |
 |
Fiber Length Analyzer | TRANSLATE with x English Arabic Hebrew Polish Bulgarian Hindi Portuguese Catalan Hmong Daw Romanian ... |
 |
Button Impact Tester | IntroductionThe test instrument is used to detect the flame resistance of the blanket fabric and the flame spread performance of the fabric surface... |
 |
Carbide wear tester | Applicable standards: GB/T 34501-2017: This standard specifies the wear resistance test method of cemented carbide, which is suitable for testing ... |
 |
Catheter bending resistance tester | Product introduction The tester is composed of a programmable controller, a touch screen, a force sensor, a transmission device, an airborne ... |
Похожие товары
 |
Air Permeability Tester STD- F8 | Продавец: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... |
 |
Surface Performance Tester STD-FB4 - A | Продавец: Standard International Group (HK) Limited | Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti... |
 |
Compression Tester STD - FB3 - A | Продавец: Standard International Group (HK) Limited | TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar... |
 |
Single - Strand Bending Tester STD - FB2 - SH | Продавец: Standard International Group (HK) Limited | Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ... |
 |
Bending Tester STD- FB2 - S | Продавец: Standard International Group (HK) Limited | Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig... |
